The total number of frames received on the physical channel.
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Vendor: Cascade Communications
Module: CASCADE-MIB (cascade.mib)
Type: TABULAR
Access: read-only
Syntax: Counter
Automatically extracted from www.mibdepot.com
chanInFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames received on the physical channel." ::= { chanEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.9.2.1.1 | chanSlotId | 0 | 0 | The slot number of the corresponding physical channel. |
| 1.3.6.1.4.1.277.1.9.2.1.2 | chanPortId | 0 | 0 | The port number of this channel on the board. |
| 1.3.6.1.4.1.277.1.9.2.1.3 | chanId | 0 | 0 | The channel number of the corresponding physical channel. |
| 1.3.6.1.4.1.277.1.9.2.1.4 | chanAdminType | 0 | 0 | The defined type of the board which the physical channel is on. |
| 1.3.6.1.4.1.277.1.9.2.1.5 | chanNumLport | 0 | 0 | The number of logical ports on the physical channel. |
| 1.3.6.1.4.1.277.1.9.2.1.6 | chanDataRate | 0 | 0 | An estimate of the physical channels's data rate in bits per second. The data rate is based on N56/N64 and DSO usage. |
| 1.3.6.1.4.1.277.1.9.2.1.7 | chanType | 0 | 0 | The actual type of the physical channel. |
| 1.3.6.1.4.1.277.1.9.2.1.8 | chanXmitClock | 0 | 0 | The transmit clock source. |
| 1.3.6.1.4.1.277.1.9.2.1.9 | chanAdminStatus | 0 | 0 | The desired state of the physical channel. |
| 1.3.6.1.4.1.277.1.9.2.1.10 | chanOperStatus | 0 | 0 | The current state of the physical channel. |
| 1.3.6.1.4.1.277.1.9.2.1.11 | chanDs1LineType | 0 | 0 | The line type of the T1 or FT1-24B channel. ANSI ESF is equivalent to Bellcore ESF. |
| 1.3.6.1.4.1.277.1.9.2.1.12 | chanDs1ZeroCoding | 0 | 0 | The variety of zero code suppression used on the other end of the T1 link will change the information rate available |
| 1.3.6.1.4.1.277.1.9.2.1.13 | chanInOctets | 0 | 0 | The total number of octets received on the physical channel, including framing characters. |
| 1.3.6.1.4.1.277.1.9.2.1.15 | chanInDiscards | 0 | 0 | The total number of inbound frames discarded. |
| 1.3.6.1.4.1.277.1.9.2.1.16 | chanInErrors | 0 | 0 | The total number of inbound frames that contained erroneous headers (e.g., illegal or unknown DLCIs). |
| 1.3.6.1.4.1.277.1.9.2.1.17 | chanOutOctets | 0 | 0 | The total number of octets transmitted out of the physical channel, including framing characters. |
| 1.3.6.1.4.1.277.1.9.2.1.18 | chanOutFrames | 0 | 0 | The total number of frames transmitted out of the physical channel. |
| 1.3.6.1.4.1.277.1.9.2.1.19 | chanOutDiscards | 0 | 0 | The total number of outbound frames discarded due to severe congestion. |
| 1.3.6.1.4.1.277.1.9.2.1.20 | chanOutErrors | 0 | 0 | The total number of outbound frames that causes xmit errors. |
| 1.3.6.1.4.1.277.1.9.2.1.21 | chanBertPattern | 0 | 0 | Pattern generated by the XBERT |
| 1.3.6.1.4.1.277.1.9.2.1.22 | chanBertUserBytes | 0 | 0 | Definition of 1,2,3 or 4 byte pattern if UserNByte selected. |
| 1.3.6.1.4.1.277.1.9.2.1.23 | chanBertErrorRate | 0 | 0 | Error rate to insert in generated pattern. |
| 1.3.6.1.4.1.277.1.9.2.1.24 | chanBertCommand | 0 | 0 | Single shot commands to the BERT. |
| 1.3.6.1.4.1.277.1.9.2.1.25 | chanBertStatus | 0 | 0 | Current status of the BERT for this channel. |
| 1.3.6.1.4.1.277.1.9.2.1.26 | chanBertBitCount | 0 | 0 | The number of bits received - stops counting at 0xFFFFFFFF |
| 1.3.6.1.4.1.277.1.9.2.1.27 | chanBertErrorCount | 0 | 0 | The number of bits received in error- stops counting at 0xFFFFFFFF |
| 1.3.6.1.4.1.277.1.9.2.1.28 | chanLinkDownReason | 0 | 0 | Reason why the link is down. The blue-alarm is equivalent to the Alarm Indication Signal (AIS) failure. |
| 1.3.6.1.4.1.277.1.9.2.1.29 | chands1SendFarEndCode | 0 | 0 | Integer used to send loopback code to far-end DS1 |
| 1.3.6.1.4.1.277.1.9.2.1.30 | chands1CodeTypeRsp | 0 | 0 | Integer used to distinguish Framed Inband Line loopback code (CSU or NI) that near end will recognize from far-end DS1 |
| 1.3.6.1.4.1.277.1.9.2.1.31 | chands1NearEndLoopConfig | 0 | 0 | Integer used to set the near end loopback state of the DS1, Diag is xmit => recv |
| 1.3.6.1.4.1.277.1.9.2.1.32 | chands1NearEndLoopStatus | 0 | 0 | Integer indicating the current loopback status of the near end of the DS1 |
| 1.3.6.1.4.1.277.1.9.2.1.33 | chanBackupClock | 0 | 0 | Backup clock source if External timing fails. |
| 1.3.6.1.4.1.277.1.9.2.1.34 | chanFT1DS0s | 0 | 0 | DS0 usage bitmask for Fractional T1 data rates. |