This object determines the type of address translation, if any
to occur for calls entering the network at this port.
The tunnelling mode reverses the actions of egress tunnelling. If a
called subaddress is present, it will replace the called party address,
which will be discarded. If a calling subaddress is present, it will
replace the calling party address, which will be discarded.
The two translation modes are used for address interworking between networks
using E.164 ATM Endsystem addresses and native ISDN E.164 addresses.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
This object determines the type of address translation, if any
to occur for calls entering the network at this port.
The tunnelling mode reverses the actions of egress tunnelling. If a
called subaddress is present, it will replace the called party address,
which will be discarded. If a calling subaddress is present, it will
replace the calling party address, which will be discarded.
The two translation modes are used for address interworking between networks
using E.164 ATM Endsystem addresses and native ISDN E.164 addresses.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
svcConfigIngressAddrXlateMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), tunnel(2), translate-e164-native-to-nsap (4), translate-e164-nsap-to-native (5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines the type of address translation, if any to occur for calls entering the network at this port. The tunnelling mode reverses the actions of egress tunnelling. If a called subaddress is present, it will replace the called party address, which will be discarded. If a calling subaddress is present, it will replace the calling party address, which will be discarded. The two translation modes are used for address interworking between networks using E.164 ATM Endsystem addresses and native ISDN E.164 addresses." ::= { svcConfigEntry 8 }
svcConfigIngressAddrXlateMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), tunnel(2), translate-e164-native-to-nsap (4), translate-e164-nsap-to-native (5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines the type of address translation, if any to occur for calls entering the network at this port. The tunnelling mode reverses the actions of egress tunnelling. If a called subaddress is present, it will replace the called party address, which will be discarded. If a calling subaddress is present, it will replace the calling party address, which will be discarded. The two translation modes are used for address interworking between networks using E.164 ATM Endsystem addresses and native ISDN E.164 addresses." ::= { svcConfigEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.5.2.1.1.1 | svcConfigIfIndex | 0 | 0 | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.277.5.2.1.1.2 | svcConfigInitiateIdentStatsUpload | 0 | 0 | Setting this object initiates a TFTP upload of SVC identification statistics to the specified IP address. These statistics may … |
| 1.3.6.1.4.1.277.5.2.1.1.3 | svcConfigCgPtyInsertionMode | 0 | 0 | This object determines whether a statically configured address shall be inserted in the calling party address IE for calls enter… |
| 1.3.6.1.4.1.277.5.2.1.1.4 | svcConfigCgPtyInsertionAddress | 0 | 0 | The calling party address to use in conjunction with the calling party insertion function. E.164 addresses are coded as 15 ASCI… |
| 1.3.6.1.4.1.277.5.2.1.1.5 | svcConfigCgPtyInsertionNmbPlan | 0 | 0 | The numbering plan corresponding to this entry's calling party insertion address object. |
| 1.3.6.1.4.1.277.5.2.1.1.6 | svcConfigCgPtyScreenMode | 0 | 0 | The type of screening to perform on the calling party number for calls entering the network at this port. Screening will be con… |
| 1.3.6.1.4.1.277.5.2.1.1.7 | svcConfigEgressAddrXlateMode | 0 | 0 | This object determines the type of address translation, if any to occur for calls exiting the network at this port. The tunnellin… |
| 1.3.6.1.4.1.277.5.2.1.1.9 | svcConfigCgPtyPresentationMode, svcConfigCugEnable | 0 | 0 | This object controls the circumstances under which the calling party number shall be presented at the egress port of the network. |
| 1.3.6.1.4.1.277.5.2.1.1.10 | svcConfigSecScrIngressMode | 0 | 0 | This object determines whether the ingress screening is enabled at this port. |
| 1.3.6.1.4.1.277.5.2.1.1.11 | svcConfigSecScrIngressDefaultScreen | 0 | 0 | This object determines whether all incoming calls at this port should be passed or blocked. This setting is superseded by the se… |
| 1.3.6.1.4.1.277.5.2.1.1.12 | svcConfigSecScrEgressMode | 0 | 0 | This object determines whether the egress security screening is enabled at this port. |
| 1.3.6.1.4.1.277.5.2.1.1.13 | svcConfigSecScrEgressDefaultScreen | 0 | 0 | This object determines whether all outgoing calls at this port should be passed or blocked. This setting is superseded by the se… |
| 1.3.6.1.4.1.277.5.2.1.1.14 | svcConfigSvcFailureLogReset | 0 | 0 | This object, when set to reset (2), will clear the SVC failure log in the switch. |
| 1.3.6.1.4.1.277.5.2.1.1.15 | svcConfigSvcFailureTrapThreshold | 0 | 0 | The threshold cross alarm value for SVC failure traps in the current 15 minute counting period. When the internal SVC failure co… |
| 1.3.6.1.4.1.277.5.2.1.1.16 | svcConfigNumSvcFailures | 0 | 0 | The total number of SVC failures on this port, as defined by RELEASE, ADD PARTY REJECT or DROP PARTY PDU's received or transmitt… |
| 1.3.6.1.4.1.277.5.2.1.1.17 | svcConfigLoadBalanceEligibilityDuration | 0 | 0 | The minimum duration for an SVC, in seconds, before it becomes eligible for load balancing. The distinguished value, 0, indicate… |
| 1.3.6.1.4.1.277.5.2.1.1.18 | svcConfigVpiVpciMappingType | 0 | 0 | VPCI to VPI Mapping Type. Given a VPCI, calculate the VPI |
| 1.3.6.1.4.1.277.5.2.1.1.19 | svcConfigVpiVpciMappingOffset | 0 | 0 | VPCI to VPI offset. |
| 1.3.6.1.4.1.277.5.2.1.1.20 | svcConfigProxyAdminStatus | 0 | 0 | Proxy signaling administrative status disabled - no proxy capabilities proxy-agent - DCE UNI port only - lport acts as a network p… |
| 1.3.6.1.4.1.277.5.2.1.1.21 | svcConfigProxyPSANodeId | 0 | 0 | Node ID of the peer PSA - 0 equals local node. |
| 1.3.6.1.4.1.277.5.2.1.1.22 | svcConfigProxyPSAIfNum | 0 | 0 | Interface number of the peer PSA - 0 equals local If num. |
| 1.3.6.1.4.1.277.5.2.1.1.23 | svcConfigTransitNetScreenMode | 0 | 0 | Screening of SVC transit network selection signaled on this ingress port. Selecting 'ignore' essentially deletes the signaled TN… |
| 1.3.6.1.4.1.277.5.2.1.1.24 | svcConfigTransitNetPresentMode | 0 | 0 | Controls presentation signaling of SVC transit network selection at this egress port. |
| 1.3.6.1.4.1.277.5.2.1.1.25 | svcConfigCktPriority | 0 | 0 | The discard priority level (0 through 3) for this circuit in the ingress direction. Affects SVCs originating on this logical por… |
| 1.3.6.1.4.1.277.5.2.1.1.26 | svcConfigRCktPriority | 0 | 0 | The discard priority level (0 through 3) for this circuit in the egress direction. Affects SVCs originating on this logical port. |
| 1.3.6.1.4.1.277.5.2.1.1.27 | svcConfigRtPriority | 0 | 0 | The routing priority level of the circuit. Affects SVCs originating on this logical port. The 3-bit bumping priority is containe… |