A row which contains the configuration parameters for an Ethernet Access
port. These rows must be created by the EMS or CLI, and are not
automatically instantiated by default.
Parsed from file pport_enet.mib.txt
Company: None
Module: APPIAN-PPORT-ETHERNET-MIB
A row which contains the configuration parameters for an Ethernet Access
port. These rows must be created by the EMS or CLI, and are not
automatically instantiated by default.
Parsed from file APPIAN-PPORT-ETHERNET-MIB.mib
Module: APPIAN-PPORT-ETHERNET-MIB
Vendor: Tecnopro SA
Module: APPIAN-PPORT-ETHERNET-MIB
[Automatically extracted from oidview.com]
acEnetCfgEntry OBJECT-TYPE SYNTAX AcEnetCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row which contains the configuration parameters for an Ethernet Access port. These rows must be created by the EMS or CLI, and are not automatically instantiated by default." INDEX { acEnetCfgNodeId, acEnetCfgSlot, acEnetCfgPort } ::= { acEnetCfgTable 1 }
acEnetCfgEntry OBJECT-TYPE SYNTAX AcEnetCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row which contains the configuration parameters for an Ethernet Access port. These rows must be created by the EMS or CLI, and are not automatically instantiated by default." INDEX { acEnetCfgNodeId, acEnetCfgSlot, acEnetCfgPort } ::= { acEnetCfgTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2785.2.3.3.2.1.1 | acEnetCfgNodeId | 0 | 0 | The node id is the id for this specific node in the OSAP ring. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.2 | acEnetCfgSlot | 0 | 0 | The physical I/O slot where this access port is located. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.3 | acEnetCfgPort | 0 | 0 | The physical connector on the I/O module for this Ethernet port. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.4 | acEnetCfgAdminStatus | 0 | 0 | Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Re… |
| 1.3.6.1.4.1.2785.2.3.3.2.1.5 | acEnetCfgOpStatus | 0 | 0 | The current operational status for the Ethernet module controlling this port. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.6 | acEnetCfgOpCode | 0 | 0 | Provides a detailed status code which can be used to isolate a problem or state condition reported in acEnetCfgOpStatus. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.7 | acEnetCfgStatsReset | 0 | 0 | Setting this attribute to True(1) will force all statistics for this row to be cleared and set to zero (0) values. Used for deb… |
| 1.3.6.1.4.1.2785.2.3.3.2.1.8 | acEnetCfgMediaType | 0 | 0 | Attribute to determine if this module is a 10mb/100mb or 1gb interface. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.9 | acEnetCfgPhysicalAddress | 0 | 0 | The physical address (MAC Address) assigned to this physical Ethernet port. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.10 | acEnetCfgActiveMediaSlot | 0 | 0 | This object identifies the slot in the chassis carrying the active media board for this port. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.11 | acEnetCfgStandbyMediaSlot | 0 | 0 | This object identifies the slot in the chassis carrying the standby media board for this port. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.12 | acEnetCfgMultiServiceEnable | 0 | 0 | Flag used to enable or disable multi-service for this Ethernet access port. When set to True(2), the port is used for multi-ser… |
| 1.3.6.1.4.1.2785.2.3.3.2.1.13 | acEnetCfgSpeed | 0 | 0 | The desired configured speed of the physical interface. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.14 | acEnetCfgDuplexity | 0 | 0 | The desired configured duplexity mode. By default set to full(1) but for interfacing to some older hubs, which do not perform l… |
| 1.3.6.1.4.1.2785.2.3.3.2.1.15 | acEnetCfgCurrentSpeed | 0 | 0 | The current operational interface speed for this Ethernet port as determined by the MAC PHY interface. If using Auto Negotiatio… |
| 1.3.6.1.4.1.2785.2.3.3.2.1.16 | acEnetCfgCurrentDuplexity | 0 | 0 | The current operational duplexity mode for this Ethernet port as determined by the MAC PHY interface. If using Auto Negotiation… |
| 1.3.6.1.4.1.2785.2.3.3.2.1.17 | acEnetCfgInterfaceName | 0 | 0 | The user configurable interface name which is an ASCII string up to 64 characters in length. |
| 1.3.6.1.4.1.2785.2.3.3.2.1.18 | acEnetCfgLinkState | 0 | 0 | The link state for this physical interface. Link state is determined by the Ethernet PHY logic and indicates whether or not the… |
| 1.3.6.1.4.1.2785.2.3.3.2.1.19 | acEnetCfgAutoNegotiate | 0 | 0 | Setting this attribute to True(1) will force this interface to use Auto Negotiation to determine interface speed and duplexity. W… |
| 1.3.6.1.4.1.2785.2.3.3.2.1.20 | acEnetCfgPauseAdminMode | 0 | 0 | This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administrati… |
| 1.3.6.1.4.1.2785.2.3.3.2.1.21 | acEnetCfgPauseOperMode | 0 | 0 | This object reflects the PAUSE mode currently in use on this interface, as determined by either (1) the result of the auto-negoti… |