!! This object *MUST* be set before any other object is accessed. !!
This is the type of protection switching to be used if independent path
level protection switching is enabled. This is similar to the
acTimeSlotPathProtectionMode object that resides in the timeslot table.
Refer to it for a description of the enumerations.
Parsed from file pport_sonet.mib.txt
Company: None
Module: APPIAN-PPORT-SONET-MIB
!! This object *MUST* be set before any other object is accessed. !!
This is the type of protection switching to be used if independent path
level protection switching is enabled. This is similar to the
acTimeSlotPathProtectionMode object that resides in the timeslot table.
Refer to it for a description of the enumerations.
Parsed from file APPIAN-PPORT-SONET-MIB.mib
Module: APPIAN-PPORT-SONET-MIB
Vendor: Tecnopro SA
Module: APPIAN-PPORT-SONET-MIB
[Automatically extracted from oidview.com]
acSonetPathProtectionProtectionMode OBJECT-TYPE SYNTAX INTEGER { odp(1), upsr(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION " !! This object *MUST* be set before any other object is accessed. !! This is the type of protection switching to be used if independent path level protection switching is enabled. This is similar to the acTimeSlotPathProtectionMode object that resides in the timeslot table. Refer to it for a description of the enumerations." ::= { acSonetPathProtectionEntry 16 }
acSonetPathProtectionProtectionMode OBJECT-TYPE SYNTAX INTEGER { odp(1), upsr(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION " !! This object *MUST* be set before any other object is accessed. !! This is the type of protection switching to be used if independent path level protection switching is enabled. This is similar to the acTimeSlotPathProtectionMode object that resides in the timeslot table. Refer to it for a description of the enumerations." ::= { acSonetPathProtectionEntry 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.1 | acSonetPathProtectionNodeId | 0 | 0 | The node id is the id for this specific node in the OSAP ring. |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.2 | acSonetPathProtectionSlot | 0 | 0 | The physical slot number of the port. |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.3 | acSonetPathProtectionPort | 0 | 0 | The physical port number of the port. |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.4 | acSonetPathProtectionPath | 0 | 0 | The STS-1 path for the port. |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.5 | acSonetPathProtectionSwitchType | 0 | 0 | acSonetPathProtectionSwitchtype |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.6 | acSonetPathProtectionSFThreshold | 0 | 0 | The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching. The value used is … |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.7 | acSonetPathProtectionSDThreshold | 0 | 0 | The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching. The value used … |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.8 | acSonetPathProtectionActiveTraffic | 0 | 0 | This variable indicates when ODP or UPSR active traffic is on this path. |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.9 | acSonetPathProtectionProtectionSwitch | 0 | 0 | This variable indicates when either a UPSR or an ODP protection switch is currently affecting this path. |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.10 | acSonetPathProtectionWTRTime | 0 | 0 | This variable defines the ODP or UPSR Wait To Restore time. The time has one second granularity and may have a value in the range… |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.11 | acSonetPathProtectionWTITime | 0 | 0 | This variable defines the ODP Wait To Idle time. The time has one second granularity and may have a value in the range from 1 to … |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.12 | acSonetPathProtectionWTCTime | 0 | 0 | This variable defines the ODP Wait To Clear time. The time has one second granularity and may have a value in the range from 1 se… |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.13 | acSonetPathProtectionWTRelTime | 0 | 0 | This variable defines the ODP Wait To Release time. The time has one second granularity and may have a value in the range from 1 … |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.14 | acSonetPathProtectionManSwitch | 0 | 0 | This variable defines the ODP and UPSR manually initiated commands. Entries 7..10 are used in ODP only. |
1.3.6.1.4.1.2785.2.3.6.2.1.7.1.15 | acSonetPathProtectionSwitchOpStatus | 0 | 0 | This variable defines the current switch condition of an ODP path. |