Time in seconds between OSAP initiated echo sequences. The default is 60
seconds. The range is an integer which is expressed in seconds supporting
1 second to 1 hour in length. This value has a direct relationship to how
long it takes to detect a PPP link down condition via keepalive processing.
The lower this value the quicker a PPP link down condition will be
detected.
The default for this value is 1
Parsed from file trunk_ppp.mib.txt
Company: None
Module: APPIAN-TRUNK-PPP-MIB
Time in seconds between OSAP initiated echo sequences. The default is 60
seconds. The range is an integer which is expressed in seconds supporting
1 second to 1 hour in length. This value has a direct relationship to how
long it takes to detect a PPP link down condition via keepalive processing.
The lower this value the quicker a PPP link down condition will be
detected.
The default for this value is 1
Parsed from file APPIAN-TRUNK-PPP-MIB.mib
Module: APPIAN-TRUNK-PPP-MIB
Vendor: Tecnopro SA
Module: APPIAN-TRUNK-PPP-MIB
[Automatically extracted from oidview.com]
acPppTrunkLCPEchoInterval OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Time in seconds between OSAP initiated echo sequences. The default is 60 seconds. The range is an integer which is expressed in seconds supporting 1 second to 1 hour in length. This value has a direct relationship to how long it takes to detect a PPP link down condition via keepalive processing. The lower this value the quicker a PPP link down condition will be detected. The default for this value is 1" DEFVAL { 1 } ::= { acPppTrunkEntry 7 }
acPppTrunkLCPEchoInterval OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Time in seconds between OSAP initiated echo sequences. The default is 60 seconds. The range is an integer which is expressed in seconds supporting 1 second to 1 hour in length. This value has a direct relationship to how long it takes to detect a PPP link down condition via keepalive processing. The lower this value the quicker a PPP link down condition will be detected. The default for this value is 1" DEFVAL { 1 } ::= { acPppTrunkEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2785.2.6.3.1.1.1 | acPppTrunkIndex | 0 | 0 | The trunk entry that this PPP / MLPPP configuration is associated. |
| 1.3.6.1.4.1.2785.2.6.3.1.1.2 | acPppTrunkMru | 0 | 0 | This attribute has been deprecated - it no longer has an effect. |
| 1.3.6.1.4.1.2785.2.6.3.1.1.3 | acPppTrunkMrru | 0 | 0 | This attribute has been deprecated - it no longer has an effect. |
| 1.3.6.1.4.1.2785.2.6.3.1.1.4 | acPppTrunkSeqNum | 0 | 0 | Defines the type of multilink sequence number to use. There are two possible sequence number types: long and short. Long sequenc… |
| 1.3.6.1.4.1.2785.2.6.3.1.1.5 | acPppTrunkMagicNumberEnable | 0 | 0 | Enables the inclusion of magic numbers in LCP messages. This, in conjunction with LCP echo is useful to detect non-transitory lo… |
| 1.3.6.1.4.1.2785.2.6.3.1.1.6 | acPppTrunkLCPEchoEnable | 0 | 0 | Enables the OSAP initiation of LCP Echo message sequence processing. This attribute also controls link keepalive processing whic… |
| 1.3.6.1.4.1.2785.2.6.3.1.1.8 | acPppTrunkMgmtAccess | 0 | 0 | This attribute controls how a PPP trunk starts up. It is used to indicate if this is an inband managment trunk. TRUE indicates t… |
| 1.3.6.1.4.1.2785.2.6.3.1.1.9 | acPppTrunkIPCPAddressEnable | 0 | 0 | This attribute controls if IP address negotiation occurs during the IPCP phase of a PPP trunk startup. If this attribute is set … |
| 1.3.6.1.4.1.2785.2.6.3.1.1.10 | acPppTrunkMaxTerminate | 0 | 0 | Max-Terminate indicates the number of Terminate-Request packets sent without receiving a Terminate-Ack before assuming that the … |
| 1.3.6.1.4.1.2785.2.6.3.1.1.11 | acPppTrunkMaxConfigure | 0 | 0 | Max-Configure indicates the number of Configure-Request packets sent without receiving a valid Configure-Ack, Configure-Nak or Co… |
| 1.3.6.1.4.1.2785.2.6.3.1.1.12 | acPppTrunkMaxFailure | 0 | 0 | Max-Failure indicates the number of Configure-Nak packets sent without sending a Configure-Ack before assuming that configuratio… |