An entry in the Slot table. (See the previous variable,
Chassis Slot Table, for an explanation of this table.)
You cannot access this variable; it is only a table marker in the
MIB. The following variables are entries in the table:
Chassis Slot Index
Logic Module Object ID
Desired Logic Module State
Current Logic Module State
Logic Module Bus
Logic Module Hardware Rev
Logic Module Firmware Rev
Logic Module Software Rev
Logic Module Serial Number
Slot Diagnostic Results
Slot Diagnostic Code
Logic Module Detection Time
Slot Temperature Status
Connectivity Module Type
Connectivity Module Rev
Connectivity Module Serial Number
Connectivity Module State
Connectivity Module Bus
Media Type Setting
Sonic Bus
Slot Module Type
Set INX-NMM to Standby
Parsed from file Racal_INXNMM.mib.txt
Company: None
Module: INXNMM-MIB
An entry in the Slot table. (See the previous variable,
Chassis Slot Table, for an explanation of this table.)
You cannot access this variable; it is only a table marker in the
MIB. The following variables are entries in the table:
Chassis Slot Index
Logic Module Object ID
Desired Logic Module State
Current Logic Module State
Logic Module Bus
Logic Module Hardware Rev
Logic Module Firmware Rev
Logic Module Software Rev
Logic Module Serial Number
Slot Diagnostic Results
Slot Diagnostic Code
Logic Module Detection Time
Slot Temperature Status
Connectivity Module Type
Connectivity Module Rev
Connectivity Module Serial Number
Connectivity Module State
Connectivity Module Bus
Media Type Setting
Sonic Bus
Slot Module Type
Set INX-NMM to Standby
Parsed from file INXNMM-MIB.mib
Module: INXNMM-MIB
Vendor: Interlan
Module: INXNMM-MIB
[Automatically extracted from oidview.com]
riLdcSlotEntry OBJECT-TYPE SYNTAX riLdcSlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Slot table. (See the previous variable, Chassis Slot Table, for an explanation of this table.) You cannot access this variable; it is only a table marker in the MIB. The following variables are entries in the table: Chassis Slot Index Logic Module Object ID Desired Logic Module State Current Logic Module State Logic Module Bus Logic Module Hardware Rev Logic Module Firmware Rev Logic Module Software Rev Logic Module Serial Number Slot Diagnostic Results Slot Diagnostic Code Logic Module Detection Time Slot Temperature Status Connectivity Module Type Connectivity Module Rev Connectivity Module Serial Number Connectivity Module State Connectivity Module Bus Media Type Setting Sonic Bus Slot Module Type Set INX-NMM to Standby" INDEX { riLdcSlotIndex } ::={ riLdcChassisSlotTable 1 }
riLdcSlotEntry OBJECT-TYPE SYNTAX RiLdcSlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Slot table. (See the previous variable, Chassis Slot Table, for an explanation of this table.) You cannot access this variable; it is only a table marker in the MIB. The following variables are entries in the table: Chassis Slot Index Logic Module Object ID Desired Logic Module State Current Logic Module State Logic Module Bus Logic Module Hardware Rev Logic Module Firmware Rev Logic Module Software Rev Logic Module Serial Number Slot Diagnostic Results Slot Diagnostic Code Logic Module Detection Time Slot Temperature Status Connectivity Module Type Connectivity Module Rev Connectivity Module Serial Number Connectivity Module State Connectivity Module Bus Media Type Setting Sonic Bus Slot Module Type Set INX-NMM to Standby" INDEX { riLdcSlotIndex } ::={ riLdcChassisSlotTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.28.10.10.1.1 | riLdcSlotIndex | 0 | 0 | A unique value for each slot in the chassis. The value ranges from 1 to n, where n is the number of slots in the chassis. This v… |
1.3.6.1.4.1.28.10.10.1.2 | riLdcSlotContents | 0 | 0 | The type of logic module that is in the slot, as specified below. If the slot is empty, this variable returns 0.0. 1.3.6.1.4.1.2… |
1.3.6.1.4.1.28.10.10.1.3 | riLdcSlotAdminStatus | 0 | 0 | The state of the logic module in the slot. To enable or disable a logic module, first set this variable to enabled(6) or disabled… |
1.3.6.1.4.1.28.10.10.1.4 | riLdcSlotOperStatus | 0 | 0 | The current state of the logic module in the slot. empty(31) indicates that there is nothing in the slot; other(200) indicates th… |
1.3.6.1.4.1.28.10.10.1.5 | riLdcSlotBus | 0 | 0 | The internal Ethernet bus connected to the NIC of the logic module. The values have the following meanings: o bus-a(2) indicates… |
1.3.6.1.4.1.28.10.10.1.6 | riLdcSlotHwRev | 0 | 0 | The hardware revision level of the logic module in the slot, returned as a hexadecimal string. If the slot is empty, the variabl… |
1.3.6.1.4.1.28.10.10.1.7 | riLdcSlotFwRev | 0 | 0 | The firmware revision level of the logic module in the slot. If the slot contains no module, or if the module contains no firmwa… |
1.3.6.1.4.1.28.10.10.1.8 | riLdcSlotSwRev | 0 | 0 | The revision level of the operating software image of the logic module in the slot. If the slot contains no module, or the modul… |
1.3.6.1.4.1.28.10.10.1.9 | riLdcSlotSerialNumber | 0 | 0 | The serial number of the logic module in the slot. If the slot is empty, the variable returns 0. |
1.3.6.1.4.1.28.10.10.1.10 | riLdcSlotDiagnostic | 0 | 0 | The results of the internal startup (i.e., nondestructive) diagnostics for the logic and connectivity modules in a slot. This va… |
1.3.6.1.4.1.28.10.10.1.11 | riLdcSlotDiagnosticCode | 0 | 0 | Diagnostic results, returned as an octet string. |
1.3.6.1.4.1.28.10.10.1.12 | riLdcSlotResetTime | 0 | 0 | The value of INX-NMM Up Time (i.e., the length of time since the INX-NMM was last initialized) when the INX-NMM detected the pres… |
1.3.6.1.4.1.28.10.10.1.13 | riLdcSlotTempCondition | 0 | 0 | The temperature status of the slot. When the slot is empty or when the module in the slot is in some other failure or error stat… |
1.3.6.1.4.1.28.10.10.1.14 | riLdcSlotConnectivityType | 0 | 0 | The type of connectivity module that is in the slot, as specified below. If there is no connectivity module in this slot, or the… |
1.3.6.1.4.1.28.10.10.1.15 | riLdcSlotConnectivityRev | 0 | 0 | The hardware revision of the connectivity module in the slot, returned as a hexadecimal string. If the slot is empty, then this … |
1.3.6.1.4.1.28.10.10.1.16 | riLdcSlotConnectivitySerialNumber | 0 | 0 | The serial number of the connectivity module in the slot. This variable returns a null string for INX-10BT RJ45 and INX-10BT Telc… |
1.3.6.1.4.1.28.10.10.1.17 | riLdcSlotConnectivityState | 0 | 0 | The state of the connectivity module in the slot. You can enable or disable only INX-AUI and INX-FST connectivity modules with th… |
1.3.6.1.4.1.28.10.10.1.18 | riLdcSlotConnectivityBus | 0 | 0 | The bus connected to an INX-AUI or INX-FST connectivity module. o bus-a(8) indicates that the INX-AUI or INX-FST is connected to B… |
1.3.6.1.4.1.28.10.10.1.19 | riLdcSlotConnectivityMedia | 0 | 0 | The INX media type for the connectivity module located in this slot. o backbone thick(11) indicates that the media type of the I… |
1.3.6.1.4.1.28.10.10.1.20 | riLdcSlotSonicBus | 0 | 0 | The internal Ethernet bus that the INX-NMM SONIC is monitoring. o bus-a(15) indicates that the SONIC is monitoring Bus A. o bus-b(… |
1.3.6.1.4.1.28.10.10.1.21 | riLdcSlotModuleType | 0 | 0 | The type of logic module in the specified slot. This variable returns the same information as Logic Module Object ID, but in int… |
1.3.6.1.4.1.28.10.10.1.22 | riLdcSlotStandbyNMM | 0 | 0 | Whether this INX-NMM is in standby mode. For this INX-NMM to be the master, this variable must be set to non-standby_NMM(4) and … |