The number of bits used in a VCI on an ATM port.
Parsed from file oc9100.mib.txt
Company: None
Module: Olicom-crossfireAtmSwitch-MIB
The number of bits used in a VCI on an ATM port.
Parsed from file Olicom-crossfireAtmSwitch-MIB.mib
Module: Olicom-crossfireAtmSwitch-MIB
Vendor: Olicom A/S
Module: Olicom-crossfireAtmSwitch-MIB
[Automatically extracted from oidview.com]
configCommonEPortMaxVciBits OBJECT-TYPE SYNTAX INTEGER (0..14) ACCESS read-write STATUS mandatory DESCRIPTION "The number of bits used in a VCI on an ATM port." ::= { configCommonEPort 6 }
configCommonEPortMaxVciBits OBJECT-TYPE SYNTAX INTEGER (0..14) ACCESS read-write STATUS mandatory DESCRIPTION "The number of bits used in a VCI on an ATM port." ::= { configCommonEPort 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.285.2.6.2.12.6.0 | configCommonEPortMaxVciBits | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.285.2.6.2.12.1 | configCommonEPortIlmiAdminStatus | 1 | 1 | Enables or disables ILMI on an ATM port. |
| 1.3.6.1.4.1.285.2.6.2.12.2 | configCommonEPortAddrRegistrationAdminStatus | 1 | 1 | Enables or disables the address registration protocol on an ATM port. |
| 1.3.6.1.4.1.285.2.6.2.12.3 | configCommonEPortMaxVpcs | 1 | 1 | The maximum number of VPCs on an ATM port. |
| 1.3.6.1.4.1.285.2.6.2.12.4 | configCommonEPortMaxVccs | 1 | 1 | The maximum number of VCCs on an ATM port. |
| 1.3.6.1.4.1.285.2.6.2.12.5 | configCommonEPortMaxVpiBits | 1 | 1 | The number of bits used in a VPI on an ATM port. |
| 1.3.6.1.4.1.285.2.6.2.12.7 | configCommonEPortUniType | 1 | 1 | The UNI type on an ATM port. |
| 1.3.6.1.4.1.285.2.6.2.12.8 | configCommonEPortUniVersion | 1 | 1 | The highest UNI version used on an ATM port. |
| 1.3.6.1.4.1.285.2.6.2.12.9 | configCommonEPortDeviceType | 1 | 1 | The ATM port device type. |
| 1.3.6.1.4.1.285.2.6.2.12.10 | configCommonEPortIlmiVersion | 1 | 1 | The highest ILMI version used on an ATM port. |
| 1.3.6.1.4.1.285.2.6.2.12.11 | configCommonEPortNniSigVersion | 1 | 1 | The NNI signalling protocol used on an ATM port. |
| 1.3.6.1.4.1.285.2.6.2.12.12 | configCommonEPortSignallingVpi | 1 | 1 | The VPI used for signalling. |
| 1.3.6.1.4.1.285.2.6.2.12.13 | configCommonEPortSignallingVci | 1 | 1 | The VCI used for signalling. |
| 1.3.6.1.4.1.285.2.6.2.12.14 | configCommonEPortIlmiVpi | 1 | 1 | The VPI used for ILMI. |
| 1.3.6.1.4.1.285.2.6.2.12.15 | configCommonEPortIlmiVci | 1 | 1 | The VCI used for ILMI. |
| 1.3.6.1.4.1.285.2.6.2.12.16 | configCommonEPortLecsVpi | 1 | 1 | The VPI used for LECS. |
| 1.3.6.1.4.1.285.2.6.2.12.17 | configCommonEPortLecsVci | 1 | 1 | The VCI used for LECS. |
| 1.3.6.1.4.1.285.2.6.2.12.18 | configCommonEPortPnniVpi | 1 | 1 | The VPI used for PNNI. |
| 1.3.6.1.4.1.285.2.6.2.12.19 | configCommonEPortPnniVci | 1 | 1 | The VCI used for PNNI. |
| 1.3.6.1.4.1.285.2.6.2.12.20 | configCommonEPortAbrBandwidthAllocation | 1 | 1 | The maximum percentage of the ATM link bandwidth that may be used for ABR traffic. |
| 1.3.6.1.4.1.285.2.6.2.12.21 | configCommonEPortVbrRtBandwidthAllocation | 1 | 1 | The maximum percentage of the ATM link bandwidth that may be used for rt-VBR traffic. |
| 1.3.6.1.4.1.285.2.6.2.12.22 | configCommonEPortVbrNrtBandwidthAllocation | 1 | 1 | The maximum percentage of the ATM link bandwidth that may be used for nrt-VBR traffic. |
| 1.3.6.1.4.1.285.2.6.2.12.23 | configCommonEPortCbrBandwidthAllocation | 1 | 1 | The maximum percentage of the ATM link bandwidth that may be used for CBR traffic. |
| 1.3.6.1.4.1.285.2.6.2.12.24 | configStaticEPortIlmiPollFrequency | 1 | 1 | Polling frequency in seconds for maintaining ILMI connectivity. |
| 1.3.6.1.4.1.285.2.6.2.12.25 | configStaticEPortIlmiPollRetries | 1 | 1 | The number of retries before declaring a loss of ILMI connectivity. |
| 1.3.6.1.4.1.285.2.6.2.12.26 | configStaticEPortMaxTransientPhyFailureTime | 1 | 1 | The maximum time in seconds where loss of signal or lack of rx sync is not considered a loss of PHY connectivity. A value of 0 in… |
| 1.3.6.1.4.1.285.2.6.2.12.27 | configStaticEPortMaxPhyFailuresPerMinute | 1 | 1 | The maximum number of transient or non-transient PHY failures per minute before an ATM port is automatically disabled and an ePor… |
| 1.3.6.1.4.1.285.2.6.2.12.28 | configCommonEPortLinkDelay | 1 | 1 | The expected transmission delay on the ATM link (in microseconds). |
| 1.3.6.1.4.1.285.2.6.2.12.29 | configCommonEPortTransientPhyOffTime | 1 | 1 | configCommonEPortTransientPhyOfftime |
| 1.3.6.1.4.1.285.2.6.2.12.30 | configCommonEPortTransientPhyWindowTime | 1 | 1 | The duration (in seconds) of the window used for measuring PHY down time. |
| 1.3.6.1.4.1.285.2.6.2.12.31 | configCommonEPortTransientPhyDisconnectCount | 1 | 1 | Number of PHY disconnects that may occur during configCommonEPortTransientPhyDisconnectTimer before an ePortAutoDisabled trap is … |
| 1.3.6.1.4.1.285.2.6.2.12.32 | configCommonEPortTransientPhyDisconnectTimer | 1 | 1 | The duration (in seconds) of the time used for counting PHY disconnects. |
| 1.3.6.1.4.1.285.2.6.2.12.33 | configCommonEPortDefaultSigVersion | 1 | 1 | The signalling version used if ILMI autoconfiguration is not possible. |
| 1.3.6.1.4.1.285.2.6.2.12.34 | configCommonEPortMaxSvpcVpi | 1 | 1 | The maximum VPI that the signalling stack on the port is configured to support for allocation to SVPCs. |
| 1.3.6.1.4.1.285.2.6.2.12.35 | configCommonEPortMaxSvccVpi | 1 | 1 | The maximum VPI that the signalling stack on the port is configured to support for allocation to SVCCs. |
| 1.3.6.1.4.1.285.2.6.2.12.36 | configCommonEPortMinSvccVci | 1 | 1 | The minimum VCI that the signalling stack on the port is configured to support for allocation to SVCCs. The same value applies to… |