The minimum VCI that the signalling stack on the port
is configured to support for allocation to SVCCs. The
same value applies to all SVCC VPI values for which
the signalling stack is configured.
Parsed from file oc9100.mib.txt
Company: None
Module: Olicom-crossfireAtmSwitch-MIB
The minimum VCI that the signalling stack on the port
is configured to support for allocation to SVCCs. The
same value applies to all SVCC VPI values for which
the signalling stack is configured.
Parsed from file Olicom-crossfireAtmSwitch-MIB.mib
Module: Olicom-crossfireAtmSwitch-MIB
Vendor: Olicom A/S
Module: Olicom-crossfireAtmSwitch-MIB
[Automatically extracted from oidview.com]
configEPortIlmiConfigMinSvccVci OBJECT-TYPE SYNTAX INTEGER (0..65536) ACCESS read-only STATUS mandatory DESCRIPTION "The minimum VCI that the signalling stack on the port is configured to support for allocation to SVCCs. The same value applies to all SVCC VPI values for which the signalling stack is configured." ::= { configEPortEntry 38 }
configEPortIlmiConfigMinSvccVci OBJECT-TYPE SYNTAX INTEGER (0..65536) ACCESS read-only STATUS mandatory DESCRIPTION "The minimum VCI that the signalling stack on the port is configured to support for allocation to SVCCs. The same value applies to all SVCC VPI values for which the signalling stack is configured." ::= { configEPortEntry 38 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.285.2.6.2.13.38.1.1 | configEPortIfIndex | 0 | 0 | The ifIndex of the ATM port described by this row. |
1.3.6.1.4.1.285.2.6.2.13.38.1.2 | configEPortHwConfigTxClocking | 0 | 0 | The clocking source for this ATM port. This setting is disregarded if this port is configured to receive the master clock from th… |
1.3.6.1.4.1.285.2.6.2.13.38.1.3 | configEPortHwConfigSonetSdh | 0 | 0 | The cell framing used on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.4 | configEPortUseCommonEPortConfig | 0 | 0 | Indicates if this ATM port should use the common ePort configuration (found in the configCommonEPort MIB subtree) or its own conf… |
1.3.6.1.4.1.285.2.6.2.13.38.1.5 | configEPortLoopback | 0 | 0 | The hardware loopback type on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.6 | configEPortIlmiConfigIlmiAdminStatus | 0 | 0 | Enables or disables ILMI on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.7 | configEPortIlmiConfigAddrRegistrationAdminStatus | 0 | 0 | Enables or disables the address registration protocol on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.8 | configEPortIlmiConfigMaxVpcs | 0 | 0 | The maximum number of VPCs on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.9 | configEPortIlmiConfigMaxVccs | 0 | 0 | The maximum number of VCCs on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.10 | configEPortIlmiConfigMaxVpiBits | 0 | 0 | The number of bits used in a VPI on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.11 | configEPortIlmiConfigMaxVciBits | 0 | 0 | The number of bits used in a VCI on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.12 | configEPortIlmiConfigUniType | 0 | 0 | The UNI type on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.13 | configEPortIlmiConfigUniVersion | 0 | 0 | The highest UNI version used on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.14 | configEPortIlmiConfigDeviceType | 0 | 0 | The ATM port device type. |
1.3.6.1.4.1.285.2.6.2.13.38.1.15 | configEPortIlmiConfigIlmiVersion | 0 | 0 | The highest ILMI version used on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.16 | configEPortIlmiConfigNniSigVersion | 0 | 0 | The NNI signalling protocol used on this ATM port. |
1.3.6.1.4.1.285.2.6.2.13.38.1.17 | configEPortIlmiConfigSignallingVpi | 0 | 0 | The VPI used for signalling. |
1.3.6.1.4.1.285.2.6.2.13.38.1.18 | configEPortIlmiConfigSignallingVci | 0 | 0 | The VCI used for signalling. |
1.3.6.1.4.1.285.2.6.2.13.38.1.19 | configEPortIlmiConfigIlmiVpi | 0 | 0 | The VPI used for ILMI. |
1.3.6.1.4.1.285.2.6.2.13.38.1.20 | configEPortIlmiConfigIlmiVci | 0 | 0 | The VCI used for ILMI. |
1.3.6.1.4.1.285.2.6.2.13.38.1.21 | configEPortIlmiConfigLecsVpi | 0 | 0 | The VPI used for LECS. |
1.3.6.1.4.1.285.2.6.2.13.38.1.22 | configEPortIlmiConfigLecsVci | 0 | 0 | The VCI used for LECS. |
1.3.6.1.4.1.285.2.6.2.13.38.1.23 | configEPortIlmiConfigPnniVpi | 0 | 0 | The VPI used for PNNI. |
1.3.6.1.4.1.285.2.6.2.13.38.1.24 | configEPortIlmiConfigPnniVci | 0 | 0 | The VCI used for PNNI. |
1.3.6.1.4.1.285.2.6.2.13.38.1.25 | configEPortAbrBandwidthAllocation | 0 | 0 | The maximum percentage of the ATM link bandwidth that may be used for ABR traffic. |
1.3.6.1.4.1.285.2.6.2.13.38.1.26 | configEPortVbrRtBandwidthAllocation | 0 | 0 | The maximum percentage of the ATM link bandwidth that may be used for rt-VBR traffic. |
1.3.6.1.4.1.285.2.6.2.13.38.1.27 | configEPortVbrNrtBandwidthAllocation | 0 | 0 | The maximum percentage of the ATM link bandwidth that may be used for nrt-VBR traffic. |
1.3.6.1.4.1.285.2.6.2.13.38.1.28 | configEPortCbrBandwidthAllocation | 0 | 0 | The maximum percentage of the ATM link bandwidth that may be used for CBR traffic. |
1.3.6.1.4.1.285.2.6.2.13.38.1.29 | configEPortLinkDelay | 0 | 0 | The expected transmission delay on the ATM link (in microseconds). |
1.3.6.1.4.1.285.2.6.2.13.38.1.30 | configEPortTransientPhyOffTime | 0 | 0 | configEPortTransientPhyOfftime |
1.3.6.1.4.1.285.2.6.2.13.38.1.31 | configEPortTransientPhyWindowTime | 0 | 0 | The duration (in seconds) of the window used for measuring PHY down time. |
1.3.6.1.4.1.285.2.6.2.13.38.1.32 | configEPortTransientPhyDisconnectCount | 0 | 0 | Number of PHY disconnects that may occur during configEPortTransientPhyDisconnectTimer before an ePortAutoDisabled trap is sent. |
1.3.6.1.4.1.285.2.6.2.13.38.1.33 | configEPortTransientPhyDisconnectTimer | 0 | 0 | The duration (in seconds) of the time used for counting PHY disconnects. |
1.3.6.1.4.1.285.2.6.2.13.38.1.34 | configEPortBandwidthLimit | 0 | 0 | The maximum total bandwidth that may be used on this ATM port (in cells/seconds). A value of -1 indicates that the full link rate… |
1.3.6.1.4.1.285.2.6.2.13.38.1.35 | configEPortDefaultSigVersion | 0 | 0 | The signalling version used if ILMI autoconfiguration is not possible. |
1.3.6.1.4.1.285.2.6.2.13.38.1.36 | configEPortIlmiConfigMaxSvpcVpi | 0 | 0 | The maximum VPI that the signalling stack on the port is configured to support for allocation to SVPCs. |
1.3.6.1.4.1.285.2.6.2.13.38.1.37 | configEPortIlmiConfigMaxSvccVpi | 0 | 0 | The maximum VPI that the signalling stack on the port is configured to support for allocation to SVCCs. |