Vendor: Olicom A/S
Module: Olicom-crossfireAtmSwitch-MIB
[Automatically extracted from oidview.com]
configCommonSignalling OBJECT IDENTIFIER ::= { crossfireAtmConfiguration 19 }
configCommonSignalling OBJECT IDENTIFIER ::= { crossfireAtmConfiguration 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.285.2.6.2.19.1 | configCommonSignallingMaxTunnels | 1 | 1 | The maximum number of additional signalling and SSCOP incarnations needed to service tunnels. |
| 1.3.6.1.4.1.285.2.6.2.19.2 | configCommonSignallingMaxSaps | 1 | 1 | The maximum number of SAPs (logical users) supported by the signalling subsystem. This value must be at least the number of ATM p… |
| 1.3.6.1.4.1.285.2.6.2.19.3 | configCommonSignallingMaxPvcs | 1 | 1 | The maximum number of simultaneously active PVCs (connections) in the entire switch. |
| 1.3.6.1.4.1.285.2.6.2.19.4 | configCommonSignallingMaxSvcs | 1 | 1 | The maximum number of simultaneously active SVCs (calls/connections) signalling instances in the entire switch. Note that each ca… |
| 1.3.6.1.4.1.285.2.6.2.19.5 | configCommonSignallingMaxConManStevs | 1 | 1 | The maximum number of Connection Manager state-event machines, i.e. the maximum number of SVC+PVC calls/connections being process… |
| 1.3.6.1.4.1.285.2.6.2.19.6 | configCommonSignallingMaxSigProtStevs | 1 | 1 | The maximum number SVC calls/connections setup or clear operations that can be processed concurrently in the entire switch. Actua… |
| 1.3.6.1.4.1.285.2.6.2.19.7 | configCommonSignallingT301 | 1 | 1 | The maximum time (in seconds) to wait for CONNECT after receiving ALERTING. Should be at least 3 minutes (180 seconds). |
| 1.3.6.1.4.1.285.2.6.2.19.8 | configCommonSignallingT302 | 1 | 1 | For N-ISDN interworking. Currently not used. |
| 1.3.6.1.4.1.285.2.6.2.19.9 | configCommonSignallingT303 | 1 | 1 | The maximum time (in seconds) to wait for response to SETUP (i.e. CALL_PROCEEDING, ALERTING or CONNECT). |
| 1.3.6.1.4.1.285.2.6.2.19.10 | configCommonSignallingT304 | 1 | 1 | For N-ISDN interworking. Currently not used. |
| 1.3.6.1.4.1.285.2.6.2.19.11 | configCommonSignallingT306 | 1 | 1 | For N-ISDN interworking. Currently not used. |
| 1.3.6.1.4.1.285.2.6.2.19.12 | configCommonSignallingT308 | 1 | 1 | The maximum time to wait for response to RELEASE. |
| 1.3.6.1.4.1.285.2.6.2.19.13 | configCommonSignallingT309 | 1 | 1 | The maximum time (in seconds) allowing SAAL (SSCOP) connection loss. If SSCOP experiences connection loss for longer than this ti… |
| 1.3.6.1.4.1.285.2.6.2.19.14 | configCommonSignallingT310 | 1 | 1 | The maximum time (in seconds) to wait for response to SETUP (i.e. ALERTING or CONNECT) after receiving CALL PROCEEDING. |
| 1.3.6.1.4.1.285.2.6.2.19.15 | configCommonSignallingT313 | 1 | 1 | The maximum time (in seconds) to wait for response to CONNECT. |
| 1.3.6.1.4.1.285.2.6.2.19.16 | configCommonSignallingT316 | 1 | 1 | The maximum time (in seconds) to wait for response to RESTART. |
| 1.3.6.1.4.1.285.2.6.2.19.17 | configCommonSignallingT317 | 1 | 1 | The maximum time (in seconds) to act on RESTART. Should be less than configCommonSignallingT316. |
| 1.3.6.1.4.1.285.2.6.2.19.18 | configCommonSignallingT322 | 1 | 1 | The maximum time (in seconds) to wait for response to STATUS ENQUIRY. |
| 1.3.6.1.4.1.285.2.6.2.19.19 | configCommonSignallingT331 | 1 | 1 | For Leaf Initiated Join support: The maximum time (in seconds) to wait for response to LEAF SETUP REQUEST. |
| 1.3.6.1.4.1.285.2.6.2.19.20 | configCommonSignallingT333 | 1 | 1 | This timer value is no longer used. Was removed from final UNI4.0 signalling specification. |
| 1.3.6.1.4.1.285.2.6.2.19.21 | configCommonSignallingT397 | 1 | 1 | The maximum time (in seconds) to wait for ADD PARTY ACK after receiving ALERTING or ADD PARTY ALERTED. Should be minimum 3 minute… |
| 1.3.6.1.4.1.285.2.6.2.19.22 | configCommonSignallingT398 | 1 | 1 | For point-to-multipoint support: The maximum time (in seconds) to wait for response to DROP PARTY. |
| 1.3.6.1.4.1.285.2.6.2.19.23 | configCommonSignallingT399 | 1 | 1 | For point-to-multipoint support: The maximum time (in seconds) to wait for response to ADD PARTY. |
| 1.3.6.1.4.1.285.2.6.2.19.24 | configCommonSignallingPtmpMaxLeafs | 1 | 1 | The maximum number of simultaneously active point-to-multipoint SVC leaf connection signalling instances (in the entire switch). … |
| 1.3.6.1.4.1.285.2.6.2.19.25 | configCommonSignallingPtmpMaxLeafOperations | 1 | 1 | The maximum number of signalling pt-to-mpt SVC leaf add or drop operations that can be processed concurrently in the entire switc… |
| 1.3.6.1.4.1.285.2.6.2.19.26 | configCommonSignallingPtmpMaxLeafsDropByClear | 1 | 1 | The maximum number of concurrent leaf drop operations (for a single pt-to-mpt connection) when initiated by call clearing. |
| 1.3.6.1.4.1.285.2.6.2.19.27 | configCommonSignallingPtmpMaxP2mpSvcs | 1 | 1 | The maximum number of the Signalling SVCs in the switch that can provide point-to-multipoint support. Note that each pt-to-mpt co… |
| 1.3.6.1.4.1.285.2.6.2.19.28 | configCommonSscopMaxSaps | 1 | 1 | The maximum number of SSCOP SAPs. This value is not used. |
| 1.3.6.1.4.1.285.2.6.2.19.29 | configCommonSscopMaxLinks | 1 | 1 | The maximum number of SSCOP Links. This value is not used. |
| 1.3.6.1.4.1.285.2.6.2.19.30 | configCommonSscopMaxRcvWinSize | 1 | 1 | The maximum SSCOP protocol receive window size. Q.2110, app.IV, defines calculation of window size. |
| 1.3.6.1.4.1.285.2.6.2.19.31 | configCommonSscopMaxCc | 1 | 1 | The maximum SSCOP Connection Control state variable value (the maximum transmissions of a BGN, END, ER or RS PDU). |
| 1.3.6.1.4.1.285.2.6.2.19.32 | configCommonSscopMaxPd | 1 | 1 | The maximum SSCOP Poll Data state variable value (the maximum transmissions of between polls). |
| 1.3.6.1.4.1.285.2.6.2.19.33 | configCommonSscopMaxStat | 1 | 1 | The maximum number of list elements placed in a SSCOP STAT PDU. |
| 1.3.6.1.4.1.285.2.6.2.19.34 | configCommonSscopTimerPoll | 1 | 1 | SSCOP Timer_POLL (in milliseconds). This defines the maximum interval between SSCOP sending POLLs, while it has unacknowledged SD… |
| 1.3.6.1.4.1.285.2.6.2.19.35 | configCommonSscopTimerNoResponse | 1 | 1 | SSCOP Timer_NO_RESPONSE (in seconds). The time interval during which at least one STAT PDU must be received, when there are unack… |
| 1.3.6.1.4.1.285.2.6.2.19.36 | configCommonSscopTimerKeepAlive | 1 | 1 | SSCOP Timer_KEEP_ALIVE (in seconds). Used when there are no unacknowledged SD PDU transmits. Defines the time period after sendin… |
| 1.3.6.1.4.1.285.2.6.2.19.37 | configCommonSscopTimerIdle | 1 | 1 | SSCOP Timer_IDLE (in seconds). Defines the idle-period during which no POLL PDUs are sent, when there are no unacknowledged SD PD… |
| 1.3.6.1.4.1.285.2.6.2.19.38 | configCommonSscopTimerCc | 1 | 1 | SSCOP Timer_CC (in units of 100 milliseconds). Defines the maximum time to wait for response, during outgoing link establish, rel… |
| 1.3.6.1.4.1.285.2.6.2.19.39 | configCommonSscopMaxSduSize | 1 | 1 | The maximum SSCOP SDU size (SAAL Service Data Unit size) in bytes. |
| 1.3.6.1.4.1.285.2.6.2.19.40 | configCommonSscopMaxUuSize | 1 | 1 | The maximum SSCOP UU size (User-to-User data size) in bytes. Note: This value is currently not needed according to Q.2130, and he… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.285.2.6.2.1 | configAddressing | 4 | 8 | None |
| 1.3.6.1.4.1.285.2.6.2.2 | configClocking | 2 | 4 | None |
| 1.3.6.1.4.1.285.2.6.2.3 | configLane | 3 | 6 | None |
| 1.3.6.1.4.1.285.2.6.2.4 | configMonitoring | 4 | 8 | None |
| 1.3.6.1.4.1.285.2.6.2.6 | configTm | 12 | 26 | None |
| 1.3.6.1.4.1.285.2.6.2.7 | configTrafficDescr | 2 | 31 | None |
| 1.3.6.1.4.1.285.2.6.2.8 | configServiceReg | 1 | 7 | None |
| 1.3.6.1.4.1.285.2.6.2.9 | configSar | 3 | 6 | None |
| 1.3.6.1.4.1.285.2.6.2.10 | configXModule | 1 | 4 | None |
| 1.3.6.1.4.1.285.2.6.2.11 | configFeatureModule | 1 | 2 | None |
| 1.3.6.1.4.1.285.2.6.2.12 | configCommonEPort | 36 | 72 | None |
| 1.3.6.1.4.1.285.2.6.2.13 | configEPort | 42 | 122 | None |
| 1.3.6.1.4.1.285.2.6.2.14 | configCpuQ | 2 | 4 | None |
| 1.3.6.1.4.1.285.2.6.2.15 | configCommonIPort | 1 | 10 | None |
| 1.3.6.1.4.1.285.2.6.2.16 | configIPort | 9 | 39 | None |
| 1.3.6.1.4.1.285.2.6.2.17 | configPvpPvc | 4 | 30 | None |
| 1.3.6.1.4.1.285.2.6.2.18 | configSvpSvc | 4 | 24 | None |
| 1.3.6.1.4.1.285.2.6.2.20 | configIisp | 2 | 10 | None |
| 1.3.6.1.4.1.285.2.6.2.21 | configIpArp | 4 | 21 | None |
| 1.3.6.1.4.1.285.2.6.2.22 | configQosClass | 1 | 6 | None |
| 1.3.6.1.4.1.285.2.6.2.23 | configSerial | 1 | 2 | None |
| 1.3.6.1.4.1.285.2.6.2.24 | configOam | 2 | 16 | None |
| 1.3.6.1.4.1.285.2.6.2.25 | configTest | 2 | 4 | None |
| 1.3.6.1.4.1.285.2.6.2.26 | configPriorityBuffer | 1 | 4 | None |