The reason this traffic descriptor was created.
Possible values are:
switchedConnection The traffic descriptor was
created because signalling
established a connection
through the switch.
management The traffic descriptor was
created through management.
default The traffic descriptor is one
of the default descriptors
present in the switch.
Parsed from file oc9100.mib.txt
Company: None
Module: Olicom-crossfireAtmSwitch-MIB
The reason this traffic descriptor was created.
Possible values are:
switchedConnection The traffic descriptor was
created because signalling
established a connection
through the switch.
management The traffic descriptor was
created through management.
default The traffic descriptor is one
of the default descriptors
present in the switch.
Parsed from file Olicom-crossfireAtmSwitch-MIB.mib
Module: Olicom-crossfireAtmSwitch-MIB
Vendor: Olicom A/S
Module: Olicom-crossfireAtmSwitch-MIB
[Automatically extracted from oidview.com]
trafficDescriptorCreationMode OBJECT-TYPE SYNTAX INTEGER { switchedConnection(1), management(2), default(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The reason this traffic descriptor was created. Possible values are: switchedConnection The traffic descriptor was created because signalling established a connection through the switch. management The traffic descriptor was created through management. default The traffic descriptor is one of the default descriptors present in the switch." ::= { trafficDescriptorEntry 2 }
trafficDescriptorCreationMode OBJECT-TYPE SYNTAX INTEGER { switchedConnection(1), management(2), default(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The reason this traffic descriptor was created. Possible values are: switchedConnection The traffic descriptor was created because signalling established a connection through the switch. management The traffic descriptor was created through management. default The traffic descriptor is one of the default descriptors present in the switch." ::= { trafficDescriptorEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.285.2.6.2.7.2.1.1 | trafficDescriptorIndex | 0 | 0 | An arbitrary integer used to differentiate multiple rows in the table. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.3 | trafficDescriptorServiceClass | 0 | 0 | The service category for this traffic descriptor. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.4 | trafficDescriptorPcr01 | 0 | 0 | The Peak Cell Rate (in cells/second) for the CLP0+1 flow. The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.5 | trafficDescriptorPcr0 | 0 | 0 | The Peak Cell Rate (in cells/second) for the CLP0 flow. The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.6 | trafficDescriptorScr01 | 0 | 0 | The Sustainable Cell Rate (in cells/second) for the CLP0+1 flow. The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.7 | trafficDescriptorScr0 | 0 | 0 | The Sustainable Cell Rate (in cells/second) for the CLP0 flow. The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.8 | trafficDescriptorMbs01 | 0 | 0 | The Maximum Burst Size for the CLP0+1 flow. The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.9 | trafficDescriptorMbs0 | 0 | 0 | The Maximum Burst Size for the CLP0 flow. The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.10 | trafficDescriptorTaggingFlag | 0 | 0 | Indicates if tagging is disabled or enabled. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.11 | trafficDescriptorFrameDiscardFlag | 0 | 0 | Indicates if frame discard is enabled or disabled. This only has any effect if configTmControlEarlyPacketDiscardAdminStatus is up. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.12 | trafficDescriptorBestEffortFlag | 0 | 0 | Indicates that best-effort delivery should be used (i.e. UBR service). |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.13 | trafficDescriptorMcr | 0 | 0 | The Minimum Cell Rate (in cells/second). The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.14 | trafficDescriptorAbrIcr | 0 | 0 | The Initial Cell Rate (in cells/second). The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.15 | trafficDescriptorAbrTbe | 0 | 0 | The Transient Buffer Exposure. The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.16 | trafficDescriptorAbrFrtt | 0 | 0 | The Fixed Round Trip time (in microseconds). The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.17 | trafficDescriptorAbrRif | 0 | 0 | The Rate Increase Factor. A value such as, for example, rifOneOver128 indicates a RIF value of 1/128. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.18 | trafficDescriptorAbrRdf | 0 | 0 | The Rate Decrease Factor. A value such as, for example, rdfOneOver128 indicates a RIF value of 1/128. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.19 | trafficDescriptorAbrNrm | 0 | 0 | The number of cells between each Resource Management (RM) cell. A value such as, for example, nrm32 indicates an Nrm value of 32. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.20 | trafficDescriptorAbrTrm | 0 | 0 | The maximum time between each Resource Management (RM) cell. A value such as, for example, trm3Point125 indicates a Trm value of … |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.21 | trafficDescriptorAbrCdf | 0 | 0 | The Cutoff Decrease Factor. A value such as, for example, cdfOneOver16 indicates a CDF value of 1/16. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.22 | trafficDescriptorAbrAdtf | 0 | 0 | The value (in centiseconds) of the ACR Decrease Time Factor. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.23 | trafficDescriptorTrafficType | 0 | 0 | The traffic descriptor type. This value is identical to the last component of the object ID of the MIB objects in the atmfTraffic… |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.24 | trafficDescriptorRowStatus | 0 | 0 | Used to control creation and deletion of new rows in the table. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.25 | trafficDescriptorCtd | 0 | 0 | The Cell Transfer Delay (in microseconds). The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.26 | trafficDescriptorCdv | 0 | 0 | The Cell Delay Variation (in microseconds). The value -1 is used to indicate that this value is not used. |
| 1.3.6.1.4.1.285.2.6.2.7.2.1.27 | trafficDescriptorLogClr | 0 | 0 | Minus the base 10 logarithm of the Cell Loss Ratio. The value 0 is used to indicate that this value is not used. |