Specifies minimum interdigit duration in milliseconds for
digit detection. The value must be in increments of 5ms.
For DTMF digits, the value must be between 25ms and 80ms.
For MF digits, the value must be between 10ms and 100ms.
Parsed from file sonusNrm.mib.txt
Company: None
Module: SONUS-NODE-RESOURCES-MIB
Specifies minimum interdigit duration in milliseconds for
digit detection. The value must be in increments of 5ms.
For DTMF digits, the value must be between 25ms and 80ms.
For MF digits, the value must be between 10ms and 100ms.
Parsed from file SONUS-NODE-RESOURCES-MIB.mib
Module: SONUS-NODE-RESOURCES-MIB
Vendor: Sonus Networks, Inc.
Module: SONUS-NODE-RESOURCES-MIB
[Automatically extracted from oidview.com]
sonusDigitProfileDetMinOffDuration OBJECT-TYPE SYNTAX Integer32 (10..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies minimum interdigit duration in milliseconds for digit detection. The value must be in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 10ms and 100ms. " DEFVAL { 40 } ::= { sonusDigitProfileEntry 9 }
sonusDigitProfileDetMinOffDuration OBJECT-TYPE SYNTAX Integer32 (10..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies minimum interdigit duration in milliseconds for digit detection. The value must be in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 10ms and 100ms. " DEFVAL { 40 } ::= { sonusDigitProfileEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.1 | sonusDigitProfileIndex | 0 | 0 | Identifies the digit profile entry. |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.2 | sonusDigitProfileName | 0 | 0 | The user name of this digit profile. |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.3 | sonusDigitProfileType | 0 | 0 | Specifies the digit's format. This value is set at object creation time and cannot be modified. |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.4 | sonusDigitProfileGenPower | 0 | 0 | Specifies digit generation power level in dBm. Power level ranges from -50 dBm (minimum power) to +3 dBm (maximum power). |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.5 | sonusDigitProfileGenMake | 0 | 0 | Specifies duration of generated digits in milliseconds. |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.6 | sonusDigitProfileGenBreak | 0 | 0 | Specifies silence between generated digits in milliseconds. |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.7 | sonusDigitProfileDetMinPower | 0 | 0 | Specifies minimum power level in dBm required for digit detection. Valid levels range from -45dBm to -25dBm. |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.8 | sonusDigitProfileDetMinOnDuration | 0 | 0 | Specifies minimum tone duration in milliseconds required for digit detection. The value must in increments of 5ms. For DTMF digi… |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10 | sonusDigitProfileDetFreqAcceptRange | 0 | 0 | Specifies frequency tolerances for digit detection. For DTMF digits the value represents accept and reject ranges. For MF digit… |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.11 | sonusDigitProfileDtmfDetTwistCutoff | 0 | 0 | For DTMF digit detection only. Twist is the ratio of high group power to low. Twist ratios below the twist cutoff will result i… |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.12 | sonusDigitProfileMfr1GenMakeKp | 0 | 0 | Specifies duration of generated KP digit in milliseconds. Only applicable if digit type is MFR1. |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.13 | sonusDigitProfileRowStatus | 0 | 0 | None |