Indicates the current state of the channel.
Bit 0 - Signal Degrade (SD) Condition. Indicates a 'soft
failure' condition resulting from the Line BER exceeding a
pre-selected threshold.
Bit 1 - Signal Fail (SF) Condition. Indicates a 'hard failure'
condition detected on the incoming OC-N signal.
Bit 2 - Locked Out. This bit, when applied to a working
channel, indicates that the channel is prevented from switching
to the protection line. When applied to the null channel, this
bit indicates that no working channel may switch to the
protection line.
The remaining states only apply to working channels which have
attempted to initiate an automatic protection switch.
Bit 3 - Switched. Indictes that the working channel is
currently switched to the protection line.
Bit 4 - Both Lines Failed. Indictes that both the working line
and the protection line are currently in a failure state.
Bit 5 - Protection Line Busy. Indictes that the protection line
is busy servicing a different working channel. (This condition
can only occur in the 1:n architecture.)
Parsed from file sonusAps.mib.txt
Company: None
Module: SONUS-SONET-APS-MIB
Indicates the current state of the channel.
Bit 0 - Signal Degrade (SD) Condition. Indicates a 'soft
failure' condition resulting from the Line BER exceeding a
pre-selected threshold.
Bit 1 - Signal Fail (SF) Condition. Indicates a 'hard failure'
condition detected on the incoming OC-N signal.
Bit 2 - Locked Out. This bit, when applied to a working
channel, indicates that the channel is prevented from switching
to the protection line. When applied to the null channel, this
bit indicates that no working channel may switch to the
protection line.
The remaining states only apply to working channels which have
attempted to initiate an automatic protection switch.
Bit 3 - Switched. Indictes that the working channel is
currently switched to the protection line.
Bit 4 - Both Lines Failed. Indictes that both the working line
and the protection line are currently in a failure state.
Bit 5 - Protection Line Busy. Indictes that the protection line
is busy servicing a different working channel. (This condition
can only occur in the 1:n architecture.)
Parsed from file SONUS-SONET-APS-MIB.mib
Module: SONUS-SONET-APS-MIB
Vendor: Sonus Networks, Inc.
Module: SONUS-SONET-APS-MIB
[Automatically extracted from oidview.com]
sonusApsChannelStatus OBJECT-TYPE SYNTAX BITS { sdCondition(0), sfCondition(1), lockedOut(2), switched(3), bothLinesFailed(4), protectionLineBusy(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current state of the channel. Bit 0 - Signal Degrade (SD) Condition. Indicates a 'soft failure' condition resulting from the Line BER exceeding a pre-selected threshold. Bit 1 - Signal Fail (SF) Condition. Indicates a 'hard failure' condition detected on the incoming OC-N signal. Bit 2 - Locked Out. This bit, when applied to a working channel, indicates that the channel is prevented from switching to the protection line. When applied to the null channel, this bit indicates that no working channel may switch to the protection line. The remaining states only apply to working channels which have attempted to initiate an automatic protection switch. Bit 3 - Switched. Indictes that the working channel is currently switched to the protection line. Bit 4 - Both Lines Failed. Indictes that both the working line and the protection line are currently in a failure state. Bit 5 - Protection Line Busy. Indictes that the protection line is busy servicing a different working channel. (This condition can only occur in the 1:n architecture.)" ::= { sonusApsChannelEntry 6 }
sonusApsChannelStatus OBJECT-TYPE SYNTAX BITS { sdCondition(0), sfCondition(1), lockedOut(2), switched(3), bothLinesFailed(4), protectionLineBusy(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current state of the channel. Bit 0 - Signal Degrade (SD) Condition. Indicates a 'soft failure' condition resulting from the Line BER exceeding a pre-selected threshold. Bit 1 - Signal Fail (SF) Condition. Indicates a 'hard failure' condition detected on the incoming OC-N signal. Bit 2 - Locked Out. This bit, when applied to a working channel, indicates that the channel is prevented from switching to the protection line. When applied to the null channel, this bit indicates that no working channel may switch to the protection line. The remaining states only apply to working channels which have attempted to initiate an automatic protection switch. Bit 3 - Switched. Indictes that the working channel is currently switched to the protection line. Bit 4 - Both Lines Failed. Indictes that both the working line and the protection line are currently in a failure state. Bit 5 - Protection Line Busy. Indictes that the protection line is busy servicing a different working channel. (This condition can only occur in the 1:n architecture.)" ::= { sonusApsChannelEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.1 | sonusApsChannelNumber | 0 | 0 | The number for the APS channel within the APS group. Number 0 is for the null channel (associated with the protection line). Num… |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.2 | sonusApsChannelLineId | 0 | 0 | The ifIndex for the SONET line that is associated with this APS channel. This variable is used to add working channels to an APS… |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.3 | sonusApsChannelPriority | 0 | 0 | The priority of the channel. This variable deterimines whether high or low priority SD and SF codes are used in K1 requests. Thi… |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.4 | sonusApsChannelSwitchCommand | 0 | 0 | A switch command initiates one external request for evaluation. (1) Clear - Clears all switch commands on the channel. (2) Lock… |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.5 | sonusApsChannelControlCommand | 0 | 0 | A control command controls the APS operation. (1) Lockout a Working Channel - Prevents the specified working channel from switch… |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.7 | sonusApsChannelOperDirectionMode | 0 | 0 | The current APS directional mode that the APS channel is operating in. |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.8 | sonusApsChannelSignalDegrades | 0 | 0 | A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured thresh… |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.9 | sonusApsChannelSignalFails | 0 | 0 | A count of Signal Fail conditions that have been detected on the incoming signal. This condition occurs when a loss of signal, l… |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.10 | sonusApsChannelSwitchovers | 0 | 0 | The number of switchovers that have occurred on this channel. |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.11 | sonusApsChannelLastSwitchover | 0 | 0 | The value of sysUpTime when this channel last switched over. |
| 1.3.6.1.4.1.2879.2.5.9.1.3.1.12 | sonusApsChannelRowStatus | 0 | 0 | The status of the MIB table entry (row). See SNMPv2-TC for the definition and use of RowStatus. |