The inactivity time out value. When this time out expires,
the adjacency with the neighbor switch is broken and the
new paths are computed to all possible destination switches
in the fabric.
Parsed from file eosn.my.txt
Company: brocade
Module: EOSN-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
bbFspfInactivityTimeout OBJECT-TYPE SYNTAX Integer32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The inactivity time out value. When this time out expires, the adjacency with the neighbor switch is broken and the new paths are computed to all possible destination switches in the fabric." ::= { bbFspf 25 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.6.2.25.0 | bbFspfInactivityTimeout | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.6.2.1 | bbFspfVersionNumber | 1 | 1 | The version of the standard which the FSPF implementation adheres to. |
1.3.6.1.4.1.289.2.2.3.1.6.2.2 | bbFspfIslPorts | 1 | 1 | A bitmap of all E_Ports. |
1.3.6.1.4.1.289.2.2.3.1.6.2.3 | bbFspfMinLsArrival | 1 | 1 | The minimum amount of time that shall pass before a switch shall accept updates of any given LSR via flooding. |
1.3.6.1.4.1.289.2.2.3.1.6.2.4 | bbFspfMinLsInterval | 1 | 1 | The minimum amount of time that shall pass before a switch is allowed to send an LSR update via flooding. |
1.3.6.1.4.1.289.2.2.3.1.6.2.5 | bbFspfStartTime | 1 | 1 | The elapsed uptime of the FSPF task from boot. |
1.3.6.1.4.1.289.2.2.3.1.6.2.6 | bbFspfLsrSelfOrigCount | 1 | 1 | The number of self originated LSRs. |
1.3.6.1.4.1.289.2.2.3.1.6.2.7 | bbFspfLsrRefreshCount | 1 | 1 | The number of times the self originated LSR was refreshed. |
1.3.6.1.4.1.289.2.2.3.1.6.2.8 | bbFspfLsrDelayTimeout | 1 | 1 | The LSR delay time out. |
1.3.6.1.4.1.289.2.2.3.1.6.2.9 | bbFspfLsrDelayCount | 1 | 1 | The number of delayed LSR's. |
1.3.6.1.4.1.289.2.2.3.1.6.2.10 | bbFspfCommand | 1 | 1 | This object is used to issue an FSPF command. Setting it to 'none' has no effect, and when it is retrieved the value will always … |
1.3.6.1.4.1.289.2.2.3.1.6.2.11 | bbFspfDebugOption | 1 | 1 | This object is used to facilitate debugging in FSPF. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15 | bbFspfPortTable | 1 | 34 | A table of FSPF interfaces, for E_Ports only. |
1.3.6.1.4.1.289.2.2.3.1.6.2.20 | bbFspfLsrTable | 1 | 15 | A Link State Records table for topology. |
1.3.6.1.4.1.289.2.2.3.1.6.2.21 | bbFspfLdTable | 1 | 7 | A table of LSR descriptors. |
1.3.6.1.4.1.289.2.2.3.1.6.2.22 | bbFspfRouteTable | 1 | 6 | A table of dynamic FSPF routes. |
1.3.6.1.4.1.289.2.2.3.1.6.2.23 | bbFspfDomainTable | 1 | 5 | A table of FSPF Domains. |
1.3.6.1.4.1.289.2.2.3.1.6.2.24 | bbFspfConnTable | 1 | 7 | A table of FSPF Connectivities. |
1.3.6.1.4.1.289.2.2.3.1.6.2.26 | bbFspfHelloTimeout | 1 | 1 | The hello time out value. When this time out expires, a hello frame is sent to the neighbor switch through this port. |
1.3.6.1.4.1.289.2.2.3.1.6.2.27 | bbFspfRxmtTimeout | 1 | 1 | The retransmission time out value. It is used to transmit topology information to the neighbor switch. If no acknowledgement is … |
1.3.6.1.4.1.289.2.2.3.1.6.2.28 | bbVfFspfTable | 1 | 9 | bbVfFspftable |
1.3.6.1.4.1.289.2.2.3.1.6.2.29 | bbVfFspfPortTable | 1 | 34 | A table of FSPF interfaces, for E_Ports only. |
1.3.6.1.4.1.289.2.2.3.1.6.2.30 | bbVfFspfLsrTable | 1 | 15 | A Link State Records table for topology. |
1.3.6.1.4.1.289.2.2.3.1.6.2.31 | bbVfFspfLdTable | 1 | 7 | A table of LSR descriptors. |
1.3.6.1.4.1.289.2.2.3.1.6.2.32 | bbVfFspfRouteTable | 1 | 6 | A table of dynamic FSPF routes. |
1.3.6.1.4.1.289.2.2.3.1.6.2.33 | bbVfFspfDomainTable | 1 | 5 | A table of FSPF Domains. |
1.3.6.1.4.1.289.2.2.3.1.6.2.34 | bbVfFspfConnTable | 1 | 7 | A table of FSPF Connectivities. |