This is the primary transmit timing source.
Parsed from file eclips_s.mib.txt
Company: None
Module: DL-NEW-DSX1-MIB
This is the primary transmit timing source.
Parsed from file DL-NEW-DSX1-MIB.mib
Module: DL-NEW-DSX1-MIB
Vendor: Digital Link
Module: DL-NEW-DSX1-MIB
[Automatically extracted from oidview.com]
dlcUnitMainClockSource OBJECT-TYPE SYNTAX INTEGER { mainNet ( 1), aux ( 2), otherNet ( 3), reserved1 ( 4), reserved2 ( 5), reserved3 ( 6), reserved4 ( 7), commPort ( 8), int-clock ( 9), ext-clock (10), data1 (11), data2 (12), data3 (13), data4 (14), data5 (15), data6 (16), data7 (17), data8 (18), data9 (19), data10 (20), data11 (21), data12 (22), data13 (23), data14 (24), data15 (25), data16 (26), data17 (27), data18 (28), data19 (29), data20 (30), data21 (31), data22 (32), data23 (33), data24 (34), data25 (35), data26 (36), data27 (37), data28 (38), data29 (39), data30 (40), data31 (41), data32 (42), noPort (43) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the primary transmit timing source." ::= { dlcUnitConfig 5 }
dlcUnitMainClockSource OBJECT-TYPE SYNTAX PortId ACCESS read-write STATUS mandatory DESCRIPTION "This is the primary transmit timing source." ::= { dlcUnitConfig 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.200.2.5.0 | dlcUnitMainClockSource | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.200.2.1 | dlcUnitId | 1 | 1 | A name that uniquely and globally identifies the unit. The Unit ID must consist of (upper-case) letters 'A'..'Z' and digits '0'..… |
| 1.3.6.1.4.1.300.200.2.2 | dlcUnitProtectMode | 1 | 1 | When true, the unit configuration can not be changed from the front panel nor can tests be initiated or terminated from the front … |
| 1.3.6.1.4.1.300.200.2.3 | dlcUnitYellowEnable | 1 | 1 | When false, yellow alarm conditions are ignored when received from a Dsx1 port, and the unit will never transmit a Yellow Alarm s… |
| 1.3.6.1.4.1.300.200.2.4 | dlcUnitNetPassFdl | 1 | 1 | Indicates which Dsx1 DTE port's FDL is connected to the `mainNet' FDL when this unit has no traffic of its own. Meaninigful values… |
| 1.3.6.1.4.1.300.200.2.6 | dlcUnitAltClockSource | 1 | 1 | This is the alternate transmit timing source. It is used when the primary source is not available. |
| 1.3.6.1.4.1.300.200.2.7 | dlcUnitExtClockRate | 1 | 1 | The signal arriving at the BNC connector on the back of the unit, in units of KHz. Must be a multiple of 56 or 64 KHz (n*56 or n*… |
| 1.3.6.1.4.1.300.200.2.8 | dlcUnitFullBandwidthLoopCode | 1 | 1 | Determines the loop codes we transmit for the Full Bandwidth Loop Up Remote and Loop Down Remote tests and the code we respond to… |
| 1.3.6.1.4.1.300.200.2.9 | dlcUnitFractionalLoopCode | 1 | 1 | Determines the loop codes we transmit for the Fractional Loop Up Remote and Loop Down Remote tests and the code we respond to when… |
| 1.3.6.1.4.1.300.200.2.10 | dlcUnitTestLength | 1 | 1 | Determines the time interval after which tests are automatically terminated. Valid values are 0, 1, 15 and 60. 0 stands for unlimi… |
| 1.3.6.1.4.1.300.200.2.11 | dlcUnitUserPattern1 | 1 | 1 | This is a sequence of the characters '0' and '1' that represents the first of two user patterns. The first character represents t… |
| 1.3.6.1.4.1.300.200.2.12 | dlcUnitUserPattern2 | 1 | 1 | This is a sequence of the characters '0' and '1' that represents the second of two user patterns. The first character represents … |
| 1.3.6.1.4.1.300.200.2.13 | dlcUnitBlockAllAlarms | 1 | 1 | When dlcUnitBlockAllAlarms is TRUE, the unit will never send any traps. |
| 1.3.6.1.4.1.300.200.2.14 | dlcUnitDsx1TrapEnableTable | 1 | 15 | A list of traps that are related to a Dsx1 port. |
| 1.3.6.1.4.1.300.200.2.15 | dlcUnitDataDteLossTrapEnableTable | 1 | 3 | Enables or disables a trap upon the loss of signal on a Data DTE port. |
| 1.3.6.1.4.1.300.200.2.16 | dlcUnitExternalAlarmInputTrapEnable | 1 | 1 | Enables or disables a trap upon detection of an alarm condition on the External Alarm Input. |
| 1.3.6.1.4.1.300.200.2.17 | dlcUnitExternalAlarmInputContacts | 1 | 1 | When set to normallyOpen, an alarm is declared when the contacts close ... and vice-versa. |
| 1.3.6.1.4.1.300.200.2.18 | dlcUnitExternalAlarmInputMessage | 1 | 1 | A character string that describes what's going on when an alarm on the External Alarm Input is detected. |
| 1.3.6.1.4.1.300.200.2.19 | dlcUnitExternalAlarmOutputContacts | 1 | 1 | When set to normallyOpen, the contacts close when any enabled alarm occurs and vice-versa. Pushing any button on the units Front P… |
| 1.3.6.1.4.1.300.200.2.20 | dlcUnitExternalAlarmOutputTrapEnable | 1 | 1 | Enables or disables the external alarm output contacts. |
| 1.3.6.1.4.1.300.200.2.21 | dlcUnitDsx1ConfigTable | 1 | 10 | A table of configuration items for a Dsx1 port. |
| 1.3.6.1.4.1.300.200.2.22 | dlcUnitDataDteConfigTable | 1 | 7 | The data DTE configuration table. |
| 1.3.6.1.4.1.300.200.2.23 | dlcUnitMuxConfigTable | 1 | 4 | This is the timeslot map configuration. |
| 1.3.6.1.4.1.300.200.2.24 | dlcUnitSnmpConfig | 13 | 33 | None |
| 1.3.6.1.4.1.300.200.2.25 | dlcUnitConfigTime | 6 | 12 | None |
| 1.3.6.1.4.1.300.200.2.26 | dlcUnitSerialNum | 1 | 1 | An ID that uniquely and globally identifies the unit. A Serial Number must consist of printable ASCII characters 0x20 ..0x7E. |
| 1.3.6.1.4.1.300.200.2.27 | dlcUnitModemConfig | 4 | 8 | None |
| 1.3.6.1.4.1.300.200.2.28 | dlcUnitInbandMode | 1 | 1 | The type of traffic expected on the link for inband management and IPM. |
| 1.3.6.1.4.1.300.200.2.29 | dlcUnitDialOutTimeInterval | 1 | 1 | A time interval for the dialout. The value should be between 0 and 255. |
| 1.3.6.1.4.1.300.200.2.30 | dlcAlarmSignal | 1 | 1 | Framed/unframed aux alarm signal option |
| 1.3.6.1.4.1.300.200.2.31 | dlcUnitIdleCode | 1 | 1 | Idle Code that is send on unassigned time slots |
| 1.3.6.1.4.1.300.200.2.32 | dlcRemoteCommunicationsMode | 1 | 1 | Framed/unframed aux alarm signal option |
| 1.3.6.1.4.1.300.200.2.33 | dlcUnitConfigLinkTest | 8 | 16 | None |
| 1.3.6.1.4.1.300.200.2.34 | dlcUnitInbandConfig | 1 | 1 | When true (== 2), inband management is enabled. |
| 1.3.6.1.4.1.300.200.2.35 | dlcUnitInbandTrafficType | 1 | 1 | The type of traffic expected on the link for inband management and IPM. |
| 1.3.6.1.4.1.300.200.2.36 | dlcUnitPerformanceMonitoring | 1 | 1 | When true (== 2), the integrated performance monitoring (IPM) is enabled |
| 1.3.6.1.4.1.300.200.2.37 | dlcUnitPvcAutoDiscovery | 1 | 1 | When true (== 2), automatic discovery of DLCIs is enabled |
| 1.3.6.1.4.1.300.200.2.38 | dlcUnitDelayMonitorConfig | 1 | 10 | None |
| 1.3.6.1.4.1.300.200.2.39 | dlcDLCItable | 1 | 5 | Table for current DLCI |
| 1.3.6.1.4.1.300.200.2.41 | dlcLMIConditioningGroup | 2 | 38 | None |
| 1.3.6.1.4.1.300.200.2.42 | dlcInbandDtePort | 1 | 1 | This object configures which DTE port has inband management. |