Vendor: Digital-Link
Module: DL-56-MIB (5664k_s.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
dl56TrapConfig OBJECT IDENTIFIER ::= { dl56UnitConfig 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.250.2.4.1 | dl56UnitBlockAllAlarms | 1 | 1 | When dl56UnitBlockAllAlarms is TRUE, the unit will never send any TRAP PDUs. |
| 1.3.6.1.4.1.300.250.2.4.2 | dl56TrapEnableTable | 1 | 11 | A list of traps that are related to a port. This table covers both Network and DTE ports. For alarms that don't apply to the sele… |
| 1.3.6.1.4.1.300.250.2.4.3 | dl56UnitExternalAlarmInputTrapEnable | 1 | 1 | Enables or disables a trap upon detection of an alarm condition on the External Alarm Input. This item is only meaningful for a s… |
| 1.3.6.1.4.1.300.250.2.4.4 | dl56UnitExternalAlarmInputContacts | 1 | 1 | When set to normallyOpen, an alarm is declared when the contacts close ... and vice-versa. This item is only valid for the shelf m… |
| 1.3.6.1.4.1.300.250.2.4.5 | dl56UnitExternalAlarmInputMessage | 1 | 1 | A character string that describes what's going on when an alarm on the External Alarm Input is detected. This item is only valid … |
| 1.3.6.1.4.1.300.250.2.4.6 | dl56UnitExternalAlarmOutputEnable | 1 | 1 | Enables or disables the external alarm output contacts. This item is only meaningful for a shelf mounted unit. For a standalone u… |
| 1.3.6.1.4.1.300.250.2.4.7 | dl56ShelfPowerSupplyFailureTrap | 1 | 1 | Enables or disables a trap upon failure of a power supply. This item is only meaningful for a shelf mounted unit. For a standalon… |
| 1.3.6.1.4.1.300.250.2.4.8 | dl56ShelfControllerFailureTrap | 1 | 1 | Enables or disables a trap upon removal of a Shelf Controller Card. This item is only meaningful for a shelf mounted unit. For a s… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.250.2.1 | dl56UnitId | 1 | 1 | A name that uniquely and globally identifies the unit. The Unit ID must consist of the following characters: 0-9 A-Z a-z ! # $ % … |
| 1.3.6.1.4.1.300.250.2.2 | dl56UnitProtectMode | 1 | 1 | When not false (== 2), tests can be neither initiated nor terminated from the front panel. |
| 1.3.6.1.4.1.300.250.2.3 | dl56UnitTestLength | 1 | 1 | Determines the time interval after which tests are automatically terminated. |
| 1.3.6.1.4.1.300.250.2.5 | dl56NetConfigTable | 1 | 6 | A table of configuration items for a port. |
| 1.3.6.1.4.1.300.250.2.6 | dl56DteConfigTable | 1 | 4 | The data DTE configuration table. |
| 1.3.6.1.4.1.300.250.2.7 | dl56UnitSnmpConfig | 13 | 26 | None |
| 1.3.6.1.4.1.300.250.2.8 | dl56UnitConfigTime | 6 | 12 | None |
| 1.3.6.1.4.1.300.250.2.9 | dl56UnitInbandMode | 1 | 1 | An entry in the Inband Management table. |