The name of the TFTP server from which to read or
write the device's configuration or from which to
read a firmware image.
The value of this object can be a fully- or
partially-qualified domain name system (dns)
name, or it can be an IP address in the
familiar 'dotted-quad' notation.
If the value of this object is a fully- or
partially-qualified dns name, the device will
attempt to use the Domain Name System to convert
the name to an IP address before initiating a
transaction with this TFTP server.
Parsed from file netopia-mib.txt
Company: None
Module: NETOPIA-MIB
The name of the TFTP server from which to read or
write the device's configuration or from which to
read a firmware image.
The value of this object can be a fully- or
partially-qualified domain name system (dns)
name, or it can be an IP address in the
familiar 'dotted-quad' notation.
If the value of this object is a fully- or
partially-qualified dns name, the device will
attempt to use the Domain Name System to convert
the name to an IP address before initiating a
transaction with this TFTP server.
Parsed from file NETOPIA-MIB.mib
Module: NETOPIA-MIB
Vendor: Farallon Computing, Inc.
Module: NETOPIA-MIB
[Automatically extracted from oidview.com]
tftpServerName OBJECT-TYPE SYNTAX HostNameOrIpAddr ACCESS read-write STATUS mandatory DESCRIPTION "The name of the TFTP server from which to read or write the device's configuration or from which to read a firmware image. The value of this object can be a fully- or partially-qualified domain name system (dns) name, or it can be an IP address in the familiar 'dotted-quad' notation. If the value of this object is a fully- or partially-qualified dns name, the device will attempt to use the Domain Name System to convert the name to an IP address before initiating a transaction with this TFTP server." ::= { tftpParams 2 }
tftpServerName OBJECT-TYPE SYNTAX HostNameOrIpAddr ACCESS read-write STATUS mandatory DESCRIPTION "The name of the TFTP server from which to read or write the device's configuration or from which to read a firmware image. The value of this object can be a fully- or partially-qualified domain name system (dns) name, or it can be an IP address in the familiar 'dotted-quad' notation. If the value of this object is a fully- or partially-qualified dns name, the device will attempt to use the Domain Name System to convert the name to an IP address before initiating a transaction with this TFTP server." ::= { tftpParams 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.304.1.3.1.10.3.2.0 | tftpServerName | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.304.1.3.1.10.3.1 | tftpMaxRetries | 1 | 1 | The maximum number of times the device will retransmit a Trivial File Transfer Protocol (TFTP) packet before terminating a TFTP tr… |
| 1.3.6.1.4.1.304.1.3.1.10.3.3 | tftpFwFileName | 1 | 1 | The file name of the firmware image file to read from the TFTP server. |
| 1.3.6.1.4.1.304.1.3.1.10.3.4 | tftpConfigFileName | 1 | 1 | The file name of the configuration file to read from or write to the TFTP server. |
| 1.3.6.1.4.1.304.1.3.1.10.3.5 | tftpReadFw | 1 | 1 | Specifying the value 'readFw(3)' in an SNMP Set Request causes the device to attempt to replace its firmware image stored in Flash… |
| 1.3.6.1.4.1.304.1.3.1.10.3.6 | tftpReadConfig | 1 | 1 | Specifying the value 'readConfig(3)' in an SNMP Set Request causes the device to attempt to replace its configuration stored in no… |
| 1.3.6.1.4.1.304.1.3.1.10.3.7 | tftpWriteConfig | 1 | 1 | Specifying the value 'writeConfig(3)' in an SNMP Set Request causes the device to attempt to write its configuration stored in non… |
| 1.3.6.1.4.1.304.1.3.1.10.3.8 | tftpCurrentTransferOctets | 1 | 1 | Indicates the number of octets transferred during the current TFTP transfer. The value of this object is reset to zero when a TF… |