The number of ISDN B-channels the device will use for
incoming calls from remote peers not matching a connection
profile in the connProfileTable.
If the value of this object is 'oneBChannel(1)', the
connection will always use exactly one B-channel.
If the value of this object is 'twoBChannels(2)', the
connection will always use exactly two B-channels.
If the value of this object is 'dynamicBandwidth(3)',
the connection will use one or two B-channels. The
number of B-channels in use at any particular point in
time will depend on the traffic level to/from the
remote peer and the existence of, or need to establish,
a simultaneous connection to another remote peer.
If the value of this object is 'twoBPreemptable(4)',
the connection will normally use two B-channels. However,
one B-channel may be temporarily preempted for use by
an incoming or outgoing POTS call; the device will
attempt to reestablish a two B-channel connection when
the preempting POTS call terminates.
Parsed from file netopia-mib.txt
Company: None
Module: NETOPIA-MIB
The number of ISDN B-channels the device will use for
incoming calls from remote peers not matching a connection
profile in the connProfileTable.
If the value of this object is 'oneBChannel(1)', the
connection will always use exactly one B-channel.
If the value of this object is 'twoBChannels(2)', the
connection will always use exactly two B-channels.
If the value of this object is 'dynamicBandwidth(3)',
the connection will use one or two B-channels. The
number of B-channels in use at any particular point in
time will depend on the traffic level to/from the
remote peer and the existence of, or need to establish,
a simultaneous connection to another remote peer.
If the value of this object is 'twoBPreemptable(4)',
the connection will normally use two B-channels. However,
one B-channel may be temporarily preempted for use by
an incoming or outgoing POTS call; the device will
attempt to reestablish a two B-channel connection when
the preempting POTS call terminates.
Parsed from file NETOPIA-MIB.mib
Module: NETOPIA-MIB
Vendor: Farallon Computing, Inc.
Module: NETOPIA-MIB
[Automatically extracted from oidview.com]
ansProfIsdnBandwidth OBJECT-TYPE SYNTAX INTEGER { oneBChannel(1), twoBChannels(2), dynamicBandwidth(3), twoBPreemptable(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of ISDN B-channels the device will use for incoming calls from remote peers not matching a connection profile in the connProfileTable. If the value of this object is 'oneBChannel(1)', the connection will always use exactly one B-channel. If the value of this object is 'twoBChannels(2)', the connection will always use exactly two B-channels. If the value of this object is 'dynamicBandwidth(3)', the connection will use one or two B-channels. The number of B-channels in use at any particular point in time will depend on the traffic level to/from the remote peer and the existence of, or need to establish, a simultaneous connection to another remote peer. If the value of this object is 'twoBPreemptable(4)', the connection will normally use two B-channels. However, one B-channel may be temporarily preempted for use by an incoming or outgoing POTS call; the device will attempt to reestablish a two B-channel connection when the preempting POTS call terminates." ::= { isdnParams 8 }
ansProfIsdnBandwidth OBJECT-TYPE SYNTAX INTEGER { oneBChannel(1), twoBChannels(2), dynamicBandwidth(3), twoBPreemptable(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of ISDN B-channels the device will use for incoming calls from remote peers not matching a connection profile in the connProfileTable. If the value of this object is 'oneBChannel(1)', the connection will always use exactly one B-channel. If the value of this object is 'twoBChannels(2)', the connection will always use exactly two B-channels. If the value of this object is 'dynamicBandwidth(3)', the connection will use one or two B-channels. The number of B-channels in use at any particular point in time will depend on the traffic level to/from the remote peer and the existence of, or need to establish, a simultaneous connection to another remote peer. If the value of this object is 'twoBPreemptable(4)', the connection will normally use two B-channels. However, one B-channel may be temporarily preempted for use by an incoming or outgoing POTS call; the device will attempt to reestablish a two B-channel connection when the preempting POTS call terminates." ::= { isdnParams 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.304.1.3.1.12.8.0 | ansProfIsdnBandwidth | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.304.1.3.1.12.1 | isdnSwitchType | 1 | 1 | isdnSwitchtype |
1.3.6.1.4.1.304.1.3.1.12.2 | isdnDirNum1 | 1 | 1 | The device's primary ISDN directory number. |
1.3.6.1.4.1.304.1.3.1.12.3 | isdnSpid1 | 1 | 1 | The device's primary service profile identifier (SPID). |
1.3.6.1.4.1.304.1.3.1.12.4 | isdnDirNum2 | 1 | 1 | The device's secondary ISDN directory number. |
1.3.6.1.4.1.304.1.3.1.12.5 | isdnSpid2 | 1 | 1 | The device's secondary service profile identifier (SPID). |
1.3.6.1.4.1.304.1.3.1.12.6 | connProfileTable | 1 | 25 | A list of entries providing configuration information for the device's possible on-demand WAN connections to remote peers via ISD… |
1.3.6.1.4.1.304.1.3.1.12.7 | ansProfConnProfRequired | 1 | 1 | Indicates whether or not an incoming call must match a connection profile entry in the connProfileTable. If the value of this obj… |
1.3.6.1.4.1.304.1.3.1.12.9 | ansProfIsdnInForce56K | 1 | 1 | Indicates whether or not the device will ignore the data rate indicated in incoming ISDN calls and assume a data rate of 56K. If t… |
1.3.6.1.4.1.304.1.3.1.12.10 | ansProfRxRip | 1 | 1 | Indicates whether or not the device will receive RIP packets over a WAN connection from a remote peer established for an incoming… |
1.3.6.1.4.1.304.1.3.1.12.11 | ansProfTxRip | 1 | 1 | ansProftxRip |
1.3.6.1.4.1.304.1.3.1.12.12 | ansProfFilterSetIndex | 1 | 1 | Indicates the set of filters to be used to filter packets received and transmitted over the WAN connection to a remote peer not m… |
1.3.6.1.4.1.304.1.3.1.12.13 | ansProfIdleSeconds | 1 | 1 | Indicates the number of seconds during which there must be no outbound traffic over a WAN connection to a remote peer not matchin… |
1.3.6.1.4.1.304.1.3.1.12.14 | ansProfPppMaxRecvUnit | 1 | 1 | Indicates the size of the largest PPP packet that can be received over a WAN connection with a remote peer established for an inc… |
1.3.6.1.4.1.304.1.3.1.12.15 | ansProfPppLinkCompression | 1 | 1 | Indicates whether or not the device will attempt to negotiate PPP link compression for a WAN connection with a remote peer establ… |
1.3.6.1.4.1.304.1.3.1.12.16 | ansProfPppRecvAuthProt | 1 | 1 | Indicates the PPP authentication protocol that the device will require a remote peer to use to authenticate itself when the devic… |
1.3.6.1.4.1.304.1.3.1.12.17 | ansProfChapChallengeName | 1 | 1 | If the value of the ansProfConnProfRequired object is 'connProfRequired(1)', and the value of the ansProfPppRecvAuthProt object i… |
1.3.6.1.4.1.304.1.3.1.12.18 | schedConnTable | 1 | 8 | A list of entries describing automatic, scheduled establishment of connections to the device's remote peers. This table supports … |