This object is used to specify the Duplex mode of this Ethernet
port. This is used only if csEthAutoneg is disabled.
Note: The default value is removed because it is not fixed in the system
after reboot when autonegotiation enabled. It is hardware configuration
dependent.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
This object is used to enable or disable the autonegotiation
feature of this Ethernet port. This feature is used to
automatically negotiate the Speed and Duplex mode for 10/100
Mbps Ethernet ports.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csEthDuplex OBJECT-TYPE SYNTAX INTEGER { half (1), full (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the Duplex mode of this Ethernet port. This is used only if csEthAutoneg is disabled. Note: The default value is removed because it is not fixed in the system after reboot when autonegotiation enabled. It is hardware configuration dependent." ::= { csEthEntry 5 }
csEthAutoneg OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable the autonegotiation feature of this Ethernet port. This feature is used to automatically negotiate the Speed and Duplex mode for 10/100 Mbps Ethernet ports." DEFVAL { enabled } ::= { csEthEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.1 | csEthSlotIndex | 0 | 0 | This object identifies the slot in which the blade that supports this port is installed. |
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.2 | csEthPortIndex, csEthModuleIndex | 0 | 0 | This object identifies a specific port on the blade installed in csEthSlotIndex. |
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.3 | csEthEncapType, csEthPortIndex | 0 | 0 | This object identifies the encapsulation method used on this Ethernet port. |
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.4 | csEthAutoneg, csEthEncapType | 0 | 0 | This object identifies the encapsulation method used on this Ethernet port. |
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.6 | csEthSpeed, csEthDuplex | 0 | 0 | This object is used to specify the speed of this Ethernet port. This is used only if csEthAutoneg is disabled. Note: The default … |
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.7 | csEthLinkTestInterval, csEthSpeed | 0 | 0 | This object is used to specify the interval, in seconds, between Link Test packet transmissions. If this object is set to 0, no… |
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.8 | csEthAdminStatus, csEthLinkTestInterval | 0 | 0 | This object is used to enable/disable thie Ethernet port. |
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.9 | csEthOperStatus, csEthAdminStatus | 0 | 0 | This object is used to enable/disable thie Ethernet port. |
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.10 | csEthOperStatus | 0 | 0 | This object indicates the current operational status of this Ethernet port. |
| 1.3.6.1.4.1.3085.3.1.3.1.1.1.11 | csEthPppoeService | 0 | 0 | This object is used to enable or disable PPPoE service on Ethernet Ports. |