This object enables or disables the BECN flow control.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
This indicates the type of interface.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csFrDlcmiBECNFlowControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables the BECN flow control." DEFVAL { disable } ::= { csFrDlcmiEntry 15 }
csFrDlcmiIfType OBJECT-TYPE SYNTAX INTEGER { dce (1), dte (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the type of interface." DEFVAL { dte } ::= { csFrDlcmiEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.1 | csFrDlcmiSlot | 0 | 0 | This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slo… |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.2 | csFrDlcmiPort, csFrDlcmiModule | 0 | 0 | This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slo… |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.3 | csFrDlcmiChannel, csFrDlcmiPort | 0 | 0 | This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slo… |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.4 | csFrDlcmiState, csFrDlcmiChannel | 0 | 0 | This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame … |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.5 | csFrDlcmiAddress, csFrDlcmiState | 0 | 0 | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.6 | csFrDlcmiAddressLen, csFrDlcmiAddress | 0 | 0 | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.7 | csFrDlcmiPollingInterval, csFrDlcmiAddressLen | 0 | 0 | This is the number of seconds between successive status enquiry messages. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.8 | csFrDlcmiFullEnquiryInterval, csFrDlcmiPollingInterval | 0 | 0 | This is the number of seconds between successive status enquiry messages. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.9 | csFrDlcmiErrorThreshold, csFrDlcmiFullEnquiryInterval | 0 | 0 | Number of status enquiry intervals that pass before issuance of a full status enquiry message. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.10 | csFrDlcmiMonitoredEvents, csFrDlcmiErrorThreshold | 0 | 0 | This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.11 | csFrDlcmiMaxSupportedVCs, csFrDlcmiMonitoredEvents | 0 | 0 | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvent… |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.12 | csFrDlcmiMulticast, csFrDlcmiMaxSupportedVCs | 0 | 0 | This indicates whether the Frame Relay interface is using a multicast service. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.13 | csFrDlcmiStatus, csFrDlcmiMulticast | 0 | 0 | This indicates whether the Frame Relay interface is using a multicast service. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.14 | csFrDlcmiIfType, csFrDlcmiStatus | 0 | 0 | csFrDlcmiIftype |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.16 | csFrDlcmiInjectionManagement, csFrDlcmiBECNFlowControl | 0 | 0 | . |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.17 | csFrDlcmiName, csFrDlcmiInjectionManagement | 0 | 0 | . |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.18 | csFrDlcmiLmiDlci, csFrDlcmiName | 0 | 0 | . |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.19 | csFrDlcmiDceN392, csFrDlcmiLmiDlci | 0 | 0 | The DLCI of the LMI for this interface. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.20 | csFrDlcmiDceN393, csFrDlcmiDceN392 | 0 | 0 | LMI monitored event count. For DCE IF Type. This is the number of status polling intervals over which the error threshold is coun… |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.21 | csFrDlcmiDceT392, csFrDlcmiDceN393 | 0 | 0 | LMI monitored event count. For DCE IF Type. This indicates the expected number of seconds between heartbeat polls. |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.22 | csFrDlcmiAsyncEnabled, csFrDlcmiDceT392 | 0 | 0 | . |
| 1.3.6.1.4.1.3085.3.1.3.4.1.1.23 | csFrDlcmiAsyncEnabled | 0 | 0 | . |