Bit Mask that has bits set for each error
event that was detected on this port and at
the same time was marked for collection in
the hub1EventRecordFlags variable.
Each bit has the following meaning, where
the bits are listed from most significant
to least significant:
bit
8 Bad Link Count Error
7 Partition Count Error
6 Receive Count Error
5 Pygmy Packet Error
4 Non SFD Error
3 Phase Lock Error
2 Elasticity Buffer Error
1 Jabber Error
Each read of this variable causes the
variable to be cleared.
Parsed from file NRC_mib.txt
Company: None
Module: NRC-MultiGate
Bit Mask that has bits set for each error
event that was detected on this port and at
the same time was marked for collection in
the hub1EventRecordFlags variable.
Each bit has the following meaning, where
the bits are listed from most significant
to least significant:
bit
8 Bad Link Count Error
7 Partition Count Error
6 Receive Count Error
5 Pygmy Packet Error
4 Non SFD Error
3 Phase Lock Error
2 Elasticity Buffer Error
1 Jabber Error
Each read of this variable causes the
variable to be cleared.
Parsed from file NRC-MultiGate.mib
Module: NRC-MultiGate
Vendor: Network Resources Corporation
Module: NRC-HUB1-MIB
[Automatically extracted from oidview.com]
hub1PortRecordValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "Bit Mask that has bits set for each error event that was detected on this port and at the same time was marked for collection in the hub1EventRecordFlags variable. Each bit has the following meaning, where the bits are listed from most significant to least significant: bit 8 Bad Link Count Error 7 Partition Count Error 6 Receive Count Error 5 Pygmy Packet Error 4 Non SFD Error 3 Phase Lock Error 2 Elasticity Buffer Error 1 Jabber Error Each read of this variable causes the variable to be cleared." ::= { hub1PortEntry 9 }
hub1PortRecordValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "Bit Mask that has bits set for each error event that was detected on this port and at the same time was marked for collection in the hub1EventRecordFlags variable. Each bit has the following meaning, where the bits are listed from most significant to least significant: bit 8 Bad Link Count Error 7 Partition Count Error 6 Receive Count Error 5 Pygmy Packet Error 4 Non SFD Error 3 Phase Lock Error 2 Elasticity Buffer Error 1 Jabber Error Each read of this variable causes the variable to be cleared." ::= { hub1PortEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.315.1.15.1.1 | hub1PortIndex | 0 | 0 | Port number that corresponds to the index value in the Repeater MIB variable rptrPortIndex. |
| 1.3.6.1.4.1.315.1.15.1.2 | hub1PortForceReconnect | 0 | 0 | None |
| 1.3.6.1.4.1.315.1.15.1.3 | hub1PortPartitionReason | 0 | 0 | None |
| 1.3.6.1.4.1.315.1.15.1.4 | hub1PortLinkState | 0 | 0 | This variable's meaning varies depending on the type of HUB: 10Base2 Not Applicable. A value of 'unknown' will always be returned.… |
| 1.3.6.1.4.1.315.1.15.1.5 | hub1PortLinkEnable | 0 | 0 | Enabling this variable has the following effect depending on the type of HUB: 10Base2 No Effect 10BaseT Link Test Enabled Fiber LM… |
| 1.3.6.1.4.1.315.1.15.1.6 | hub1PortPolarityStatus | 0 | 0 | None |
| 1.3.6.1.4.1.315.1.15.1.7 | hub1PortName | 0 | 0 | Administrator assigned ASCII port name. |
| 1.3.6.1.4.1.315.1.15.1.8 | hub1PortEventCount | 0 | 0 | Counter of all error events that were detected on this port and at the same time were marked for collection in the hub1EventCounte… |
| 1.3.6.1.4.1.315.1.15.1.10 | hub1PortType | 0 | 0 | The type of port |