The SCG Membership Group number (MGN) is a 16-bit number allowing
up to 65534 separate groups that can be identified and distinguished
per IP subnet. Zero and 65535 are not used. The MGN is used in all
communication between members of the SCG and a Network Management Card
(NMC) will listen and only respond to commands sent to it using its
configured SCG ID.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
The SCG Membership Group number (MGN) is a 16-bit number allowing
up to 65534 separate groups that can be identified and distinguished
per IP subnet. Zero and 65535 are not used. The MGN is used in all
communication between members of the SCG and a Network Management Card
(NMC) will listen and only respond to commands sent to it using its
configured SCG ID.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
upsSCGMembershipGroupNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The SCG Membership Group number (MGN) is a 16-bit number allowing up to 65534 separate groups that can be identified and distinguished per IP subnet. Zero and 65535 are not used. The MGN is used in all communication between members of the SCG and a Network Management Card (NMC) will listen and only respond to commands sent to it using its configured SCG ID." ::= { upsSyncCtrlGroupConfig 1 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
upsSCGMembershipGroupNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The SCG Membership Group number (MGN) is a 16-bit number allowing up to 65534 separate groups that can be identified and distinguished per IP subnet. Zero and 65535 are not used. The MGN is used in all communication between members of the SCG and a Network Management Card (NMC) will listen and only respond to commands sent to it using its configured SCG ID." ::= { upsSyncCtrlGroupConfig 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.10.1.1.0 | upsSCGMembershipGroupNumber | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.10.1.2 | upsSCGActiveMembershipStatus | 1 | 1 | Membership in the configured SCG can be enabled and disabled. If an NMC is configured for an SCG, but has its membership disable… |
| 1.3.6.1.4.1.318.1.1.1.10.1.3 | upsSCGPowerSynchronizationDelayTime | 1 | 1 | The Power Synchronization Delay Time (PSD) setting is the maximum number of seconds an SCG Initiator will wait for all SCG membe… |
| 1.3.6.1.4.1.318.1.1.1.10.1.4 | upsSCGReturnBatteryCapacityOffset | 1 | 1 | A reboot command uses the Initiator's Return battery Capacity (RBC) to control when the SCG completes this operation. In a Norma… |
| 1.3.6.1.4.1.318.1.1.1.10.1.5 | upsSCGMultiCastIP | 1 | 1 | The MultiCast IP address of the SCG Group. |