This variable indicates the configuration bits
for port. The configuration can be set by setting the relevant
bit to 1 and reset by setting the relevant bit to zero.
Bit Value Name Description
0 set the ncmdsu port configuration to zero
0 1 64k set uses 8bits of data/64kbps.
1 2 LEN set enable loop code and loop commands
2 4 INV set invert the channelized data
3 8 SCR set to scramble channelized data.
4 16 CLK1 DTE transmit clock select bits
5 32 CLK2 DTE transmit clock select bits
6 64 TU set port as a timing unit
7 128 ALM set if DIU has to report alarms to SAM.
Parsed from file ncmdsu.mib.txt
Company: None
Module: VERILINK-ENTERPRISE-NCMDSU-MIB
This variable indicates the configuration bits
for port. The configuration can be set by setting the relevant
bit to 1 and reset by setting the relevant bit to zero.
Bit Value Name Description
0 set the ncmdsu port configuration to zero
0 1 64k set uses 8bits of data/64kbps.
1 2 LEN set enable loop code and loop commands
2 4 INV set invert the channelized data
3 8 SCR set to scramble channelized data.
4 16 CLK1 DTE transmit clock select bits
5 32 CLK2 DTE transmit clock select bits
6 64 TU set port as a timing unit
7 128 ALM set if DIU has to report alarms to SAM.
Parsed from file VERILINK-ENTERPRISE-NCMDSU-MIB.mib
Module: VERILINK-ENTERPRISE-NCMDSU-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-NCMDSU-MIB
[Automatically extracted from oidview.com]
ncmddsPortConfiguration OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the configuration bits for port. The configuration can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Name Description 0 set the ncmdsu port configuration to zero 0 1 64k set uses 8bits of data/64kbps. 1 2 LEN set enable loop code and loop commands 2 4 INV set invert the channelized data 3 8 SCR set to scramble channelized data. 4 16 CLK1 DTE transmit clock select bits 5 32 CLK2 DTE transmit clock select bits 6 64 TU set port as a timing unit 7 128 ALM set if DIU has to report alarms to SAM." ::= { ncmddsMainConfigEntry 5 }
ncmddsPortConfiguration OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the configuration bits for port. The configuration can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Name Description 0 set the ncmdsu port configuration to zero 0 1 64k set uses 8bits of data/64kbps. 1 2 LEN set enable loop code and loop commands 2 4 INV set invert the channelized data 3 8 SCR set to scramble channelized data. 4 16 CLK1 DTE transmit clock select bits 5 32 CLK2 DTE transmit clock select bits 6 64 TU set port as a timing unit 7 128 ALM set if DIU has to report alarms to SAM." ::= { ncmddsMainConfigEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3024.5000.1.1 | ncmddsNIDMainConfigIndex | 0 | 0 | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3024.5000.1.2 | ncmddsMainLineIndex | 0 | 0 | None |
| 1.3.6.1.4.1.321.1.3024.5000.1.3 | ncmddsdsubus | 0 | 0 | The ncmdsu bus type for Port. |
| 1.3.6.1.4.1.321.1.3024.5000.1.4 | ncmddsPortChannel | 0 | 0 | This variable indicates the channel assignment for the ncmdsu for the port. |
| 1.3.6.1.4.1.321.1.3024.5000.1.6 | ncmddscsushelf | 0 | 0 | This variable indicates the csu shelf associated with the ncmdsu port. |
| 1.3.6.1.4.1.321.1.3024.5000.1.7 | ncmddscsuslot | 0 | 0 | This variable indicates the csu slot associated with the ncmdsu port. |
| 1.3.6.1.4.1.321.1.3024.5000.1.8 | ncmddsLosLead | 0 | 0 | This variable indicates the DTE lead bits for port. The DTE leads can be set by setting the relevant bit to 1 and reset by settin… |