An entry in the ncm csu main configuration table.
Parsed from file csuncm.mib.txt
Company: None
Module: VERILINK-ENTERPRISE-CSUNCM-MIB
An entry in the ncm csu main configuration table.
Parsed from file VERILINK-ENTERPRISE-CSUNCM-MIB.mib
Module: VERILINK-ENTERPRISE-CSUNCM-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-CSUNCM-MIB
[Automatically extracted from oidview.com]
ncmcsuMainConfigEntry OBJECT-TYPE SYNTAX NcmcsuMainConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ncm csu main configuration table." INDEX { ncmcsuNIDMainConfigIndex, ncmcsuMainLineIndex } ::= { ncmcsuMainConfigTable 1 }
ncmcsuMainConfigEntry OBJECT-TYPE SYNTAX NcmcsuMainConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ncm csu main configuration table." INDEX { ncmcsuNIDMainConfigIndex, ncmcsuMainLineIndex } ::= { ncmcsuMainConfigTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.321.1.3025.6000.1.1 | ncmcsuNIDMainConfigIndex | 0 | 0 | This variable specifies the node id. |
1.3.6.1.4.1.321.1.3025.6000.1.2 | ncmcsuMainLineIndex | 0 | 0 | This variable specifies the line index value. |
1.3.6.1.4.1.321.1.3025.6000.1.3 | ncmcsuFormat | 0 | 0 | The ncmcsu Net/Eq format. |
1.3.6.1.4.1.321.1.3025.6000.1.4 | ncmcsuLineCode | 0 | 0 | The ncmcsu Net/Eq Line Code. |
1.3.6.1.4.1.321.1.3025.6000.1.5 | ncmcsuEQCableLength | 0 | 0 | The ncmcsu EQ Cable Length. |
1.3.6.1.4.1.321.1.3025.6000.1.6 | ncmcsuTiming | 0 | 0 | The ncmcsu timing. |
1.3.6.1.4.1.321.1.3025.6000.1.7 | ncmdsudatabus | 0 | 0 | The dsu data bus reserved for future. |
1.3.6.1.4.1.321.1.3025.6000.1.8 | ncmcsuNetLineBuildOut | 0 | 0 | The ncmcsu net line build out. |
1.3.6.1.4.1.321.1.3025.6000.1.9 | ncmcsuValidIntervals | 0 | 0 | The ncmcsu valid intervals. |
1.3.6.1.4.1.321.1.3025.6000.1.10 | ncmcsuCurrentIntervalSec | 0 | 0 | The ncmcsu seconds in current 15 minutes interval. |
1.3.6.1.4.1.321.1.3025.6000.1.11 | ncmcsuJitterBuf | 0 | 0 | The ncmcsu Net/Eq Jitter buffer in bits. |
1.3.6.1.4.1.321.1.3025.6000.1.12 | ncmcsuTestSigCfgEnable | 0 | 0 | bit 1 of MSGOUT+47 for read or of MSGIN+47 for write is test signal enable in this test signal configuration message. |
1.3.6.1.4.1.321.1.3025.6000.1.13 | ncmcsuTestSigCfgFrameSignal | 0 | 0 | bit 7 of MSGOUT+47 for read or of MSGIN+47 for write is frame test signal in this test signal configuration message. |
1.3.6.1.4.1.321.1.3025.6000.1.14 | ncmcsuRLBTimeoutIndex | 0 | 0 | The rlb timeout index. |
1.3.6.1.4.1.321.1.3025.6000.1.15 | ncmcsuCfgRptSendPRM | 0 | 0 | bit 0 of MSGOUT+52 for read or MSGIN+52 for write is send prm in this configure report message. |
1.3.6.1.4.1.321.1.3025.6000.1.16 | ncmcsuCfgRptPollFarEnd | 0 | 0 | bit 1 of MSGOUT+52 for read or MSGIN+52 for write is poll far end in this configure report message. |
1.3.6.1.4.1.321.1.3025.6000.1.17 | ncmcsuCfgRptDataLinkUnsolicit | 0 | 0 | bit 2 of MSGOUT+52 for read or MSGIN+52 for write is data link unsolicited report in this configure report message. |
1.3.6.1.4.1.321.1.3025.6000.1.18 | ncmcsuCfgRptAlmReporting | 0 | 0 | bit 3 of MSGOUT+52 for read or MSGIN+52 for write is alarm reporting in this configure report message. |
1.3.6.1.4.1.321.1.3025.6000.1.19 | ncmcsuCfgRptPRMType | 0 | 0 | bit 4,5 of MSGOUT+52 for read or of MSGIN+52 for write is PRM type in this configure report message. |
1.3.6.1.4.1.321.1.3025.6000.1.20 | ncmcsuCfgCodeRegenCRC | 0 | 0 | bit 0,1 of MSGOUT+53 for read or MSGIN+53 for write is regenerate crc from net to dte or eq to net in this configure coding mess… |
1.3.6.1.4.1.321.1.3025.6000.1.21 | ncmcsuCfgCodeXYellowAlarm | 0 | 0 | bit 2,3 of MSGOUT+53 for read or MSGIN+53 for write is transcode yellow alarm from net to dte or eq to net in this configure cod… |
1.3.6.1.4.1.321.1.3025.6000.1.22 | ncmcsuCfgCodeEQFIFO | 0 | 0 | bit 4 of MSGOUT+53 for read or MSGIN+53 for write is eq fifo in this configure coding message. |
1.3.6.1.4.1.321.1.3025.6000.1.23 | ncmcsuCfgCodeNETFIFO | 0 | 0 | bit 5 of MSGOUT+53 for read or MSGIN+53 for write is net fifo in this configure coding message. |
1.3.6.1.4.1.321.1.3025.6000.1.24 | ncmcsuCfgCodeTranMode | 0 | 0 | bit 6 of MSGOUT+53 for read or MSGIN+53 for write is transparent mode in this configure report message. |
1.3.6.1.4.1.321.1.3025.6000.1.25 | ncmcsuCfgCodeSend1sLnkIdle | 0 | 0 | bit 7 of MSGOUT+53 for read or MSGIN+53 for write is send ones data link idle code in this configure report message. |
1.3.6.1.4.1.321.1.3025.6000.1.26 | ncmcsuCfgAlmSelfTest | 0 | 0 | ncmcsuCfgAlmSelftest |
1.3.6.1.4.1.321.1.3025.6000.1.27 | ncmcsuCfgAlmEnableTestState | 0 | 0 | bit 1 of MSGOUT+54 for read or MSGIN+54 for write is enable alarms in test state in this configure alarm message. |
1.3.6.1.4.1.321.1.3025.6000.1.28 | ncmcsuCfgAlmUnframedMode | 0 | 0 | bit 2 of MSGOUT+54 for read or MSGIN+54 for write is alarms in unframe mode in this configure alarm message. |
1.3.6.1.4.1.321.1.3025.6000.1.29 | ncmcsuCfgAlmOnEqLoop | 0 | 0 | bit 3 of MSGOUT+54 for read or MSGIN+54 for write is alarm on eq loop loop in this configure alarm message. |
1.3.6.1.4.1.321.1.3025.6000.1.30 | ncmcsuCfgAlmOnNetLoop | 0 | 0 | bit 4 of MSGOUT+54 for read or MSGIN+54 for write is alarm on net loop in this configure alarm message. |
1.3.6.1.4.1.321.1.3025.6000.1.31 | ncmcsuCfgAlmOnPowerUpLoop | 0 | 0 | bit 5 of MSGOUT+54 for read or MSGIN+54 for write is alarm power up loop in this configure alarm message. |
1.3.6.1.4.1.321.1.3025.6000.1.32 | ncmcsuCfgLoopRespLLB | 0 | 0 | bit 0 of MSGOUT+55 for read or MSGIN+55 for respond to LLB in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3025.6000.1.33 | ncmcsuCfgLoopRespPLB | 0 | 0 | bit 1 of MSGOUT+55 for read or MSGIN+55 for respond to PLB in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3025.6000.1.34 | ncmcsuCfgLoopRespELB | 0 | 0 | bit 2 of MSGOUT+55 for read or MSGIN+55 for respond to ELB in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3025.6000.1.35 | ncmcsuCfgLoopRespRLB | 0 | 0 | bit 3 of MSGOUT+55 for read or MSGIN+55 for respond to RLB in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3025.6000.1.36 | ncmcsuCfgLoopRespLLBTONE | 0 | 0 | bit 4 of MSGOUT+55 for read or MSGIN+55 for respond to LLB (T1.403) in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3025.6000.1.37 | ncmcsuCfgLoopRespPLBTONE | 0 | 0 | bit 5 of MSGOUT+55 for read or MSGIN+55 for respond to PLB (T1.403) in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3025.6000.1.38 | ncmcsuCfgSendReceiveInBandCode | 0 | 0 | bit 6 of MSGOUT+55 for read or MSGIN+55 for enable to Send/Receive of in-band code. |