An entry in the ncmidcsu configuration table.
Parsed from file ncmidcsu.mib.txt
Company: None
Module: ncmidcsu.mib.txt
An entry in the ncmidcsu configuration table.
Parsed from file VERILINK-ENTERPRISE-NCMIDCSU-MIB.mib
Module: VERILINK-ENTERPRISE-NCMIDCSU-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-NCMIDCSU-MIB
[Automatically extracted from oidview.com]
ncmidcsuConfigEntry OBJECT-TYPE SYNTAX NcmidcsuConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ncmidcsu configuration table." INDEX { ncmidcsucfgNIDIndex, ncmidcsuLineIndex } ::= { ncmidcsuConfigTable 1 }
ncmidcsuConfigEntry OBJECT-TYPE SYNTAX NcmidcsuConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ncmidcsu configuration table." INDEX { ncmidcsucfgNIDIndex, ncmidcsuLineIndex } ::= { ncmidcsuConfigTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.321.1.3027.10000.1.1 | ncmidcsucfgNIDIndex | 0 | 0 | This variable indicates the node id value of the node. |
1.3.6.1.4.1.321.1.3027.10000.1.2 | ncmidcsuLineIndex | 0 | 0 | None |
1.3.6.1.4.1.321.1.3027.10000.1.3 | ncmidcsuNetLineBuildOut | 0 | 0 | The ncmidcsu net line build out. |
1.3.6.1.4.1.321.1.3027.10000.1.4 | ncmidcsuNetworkKeepAlive | 0 | 0 | The ncmidcsu network keep alive varaible . |
1.3.6.1.4.1.321.1.3027.10000.1.5 | ncmidcsuExcessiveError | 0 | 0 | The Net/Eq has excessive errors. |
1.3.6.1.4.1.321.1.3027.10000.1.6 | ncmidcsuOutOfFrame | 0 | 0 | The ncmidcsu Eq is out of frame (OOF). |
1.3.6.1.4.1.321.1.3027.10000.1.7 | ncmidcsuFormat | 0 | 0 | The ncmidcsu Net/Eq format. |
1.3.6.1.4.1.321.1.3027.10000.1.8 | ncmidcsuNetDensityEnforcement | 0 | 0 | The ncmidcsu net density enforcement. |
1.3.6.1.4.1.321.1.3027.10000.1.9 | ncmidcsuNetLossOfSignal | 0 | 0 | The ncmidcsu Net/Eq uas interval. |
1.3.6.1.4.1.321.1.3027.10000.1.10 | ncmidcsuJitterBuf | 0 | 0 | The ncmidcsu Net/Eq Jitter buffer in bits. |
1.3.6.1.4.1.321.1.3027.10000.1.11 | ncmidcsuTestSigCfgEnable | 0 | 0 | bit 1 of MSGOUT+47 for read or of MSGIN+47 for write is test signal enable in this test signal configuration message. |
1.3.6.1.4.1.321.1.3027.10000.1.12 | ncmidcsuTestSigCfgFrameSignal | 0 | 0 | bit 7 of MSGOUT+47 for read or of MSGIN+47 for write is frame test signal in this test signal configuration message. |
1.3.6.1.4.1.321.1.3027.10000.1.13 | ncmidcsuCfgRptSendPRM | 0 | 0 | bit 0 of MSGOUT+52 for read or MSGIN+52 for write is send prm in this configure report message. |
1.3.6.1.4.1.321.1.3027.10000.1.14 | ncmidcsuCfgRptPollFarEnd | 0 | 0 | bit 1 of MSGOUT+52 for read or MSGIN+52 for write is poll far end in this configure report message. |
1.3.6.1.4.1.321.1.3027.10000.1.15 | ncmidcsuCfgRptDataLinkUnsolicit | 0 | 0 | bit 2 of MSGOUT+52 for read or MSGIN+52 for write is data link unsolicited report in this configure report message. |
1.3.6.1.4.1.321.1.3027.10000.1.16 | ncmidcsuCfgRptAlmReporting | 0 | 0 | bit 3 of MSGOUT+52 for read or MSGIN+52 for write is alarm reporting in this configure report message. |
1.3.6.1.4.1.321.1.3027.10000.1.17 | ncmidcsuCfgRptPRMType | 0 | 0 | bit 4,5 of MSGOUT+52 for read or of MSGIN+52 for write is PRM type in this configure report message. |
1.3.6.1.4.1.321.1.3027.10000.1.18 | ncmidcsuCfgCodeRegenCRC | 0 | 0 | bit 0,1 of MSGOUT+53 for read or MSGIN+53 for write is regenerate crc from net to dte or eq to net in this configure coding mess… |
1.3.6.1.4.1.321.1.3027.10000.1.19 | ncmidcsuCfgCodeXYellowAlarm | 0 | 0 | bit 2,3 of MSGOUT+53 for read or MSGIN+53 for write is transcode yellow alarm from net to dte or eq to net in this configure cod… |
1.3.6.1.4.1.321.1.3027.10000.1.20 | ncmidcsuCfgCodeEQFIFO | 0 | 0 | bit 4 of MSGOUT+53 for read or MSGIN+53 for write is eq fifo in this configure coding message. |
1.3.6.1.4.1.321.1.3027.10000.1.21 | ncmidcsuCfgCodeNETFIFO | 0 | 0 | bit 5 of MSGOUT+53 for read or MSGIN+53 for write is net fifo in this configure coding message. |
1.3.6.1.4.1.321.1.3027.10000.1.22 | ncmidcsuCfgCodeTranMode | 0 | 0 | bit 6 of MSGOUT+53 for read or MSGIN+53 for write is transparent mode in this configure report message. |
1.3.6.1.4.1.321.1.3027.10000.1.23 | ncmidcsuCfgCodeSend1sLnkIdle | 0 | 0 | bit 7 of MSGOUT+53 for read or MSGIN+53 for write is send ones data link idle code in this configure report message. |
1.3.6.1.4.1.321.1.3027.10000.1.24 | ncmidcsuCfgAlmSelfTest | 0 | 0 | ncmidcsuCfgAlmSelftest |
1.3.6.1.4.1.321.1.3027.10000.1.25 | ncmidcsuCfgAlmEnableTestState | 0 | 0 | bit 1 of MSGOUT+54 for read or MSGIN+54 for write is enable alarms in test state in this configure alarm message. |
1.3.6.1.4.1.321.1.3027.10000.1.26 | ncmidcsuCfgAlmUnframedMode | 0 | 0 | bit 2 of MSGOUT+54 for read or MSGIN+54 for write is alarms in unframe mode in this configure alarm message. |
1.3.6.1.4.1.321.1.3027.10000.1.27 | ncmidcsuCfgAlmOnEqLoop | 0 | 0 | bit 3 of MSGOUT+54 for read or MSGIN+54 for write is alarm on eq loop loop in this configure alarm message. |
1.3.6.1.4.1.321.1.3027.10000.1.28 | ncmidcsuCfgAlmOnNetLoop | 0 | 0 | bit 4 of MSGOUT+54 for read or MSGIN+54 for write is alarm on net loop in this configure alarm message. |
1.3.6.1.4.1.321.1.3027.10000.1.29 | ncmidcsuCfgAlmOnPowerUpLoop | 0 | 0 | bit 5 of MSGOUT+54 for read or MSGIN+54 for write is alarm power up loop in this configure alarm message. |
1.3.6.1.4.1.321.1.3027.10000.1.30 | ncmidcsuCfgLoopRespLLB | 0 | 0 | bit 0 of MSGOUT+55 for read or MSGIN+55 for respond to LLB in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3027.10000.1.31 | ncmidcsuCfgLoopRespPLB | 0 | 0 | bit 1 of MSGOUT+55 for read or MSGIN+55 for respond to PLB in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3027.10000.1.32 | ncmidcsuCfgLoopRespELB | 0 | 0 | bit 2 of MSGOUT+55 for read or MSGIN+55 for respond to ELB in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3027.10000.1.33 | ncmidcsuCfgLoopRespRLB | 0 | 0 | bit 3 of MSGOUT+55 for read or MSGIN+55 for respond to RLB in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3027.10000.1.34 | ncmidcsuCfgLoopRespLLBTONE | 0 | 0 | bit 4 of MSGOUT+55 for read or MSGIN+55 for respond to LLB (T1.403) in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3027.10000.1.35 | ncmidcsuCfgLoopRespPLBTONE | 0 | 0 | bit 5 of MSGOUT+55 for read or MSGIN+55 for respond to PLB (T1.403) in this configure Loop Response Message. |
1.3.6.1.4.1.321.1.3027.10000.1.36 | ncmidcsuCfgSendReceiveInBandCode | 0 | 0 | bit 6 of MSGOUT+55 for read or MSGIN+55 for enable to Send/Receive of in-band code. |