If ripAuthOn TRUE enables authentication on this
interface. All updates generated from this interface
would be authenticated using specified authentication
type set by ripIfAuthType
Parsed from file fore_rip.mib.txt
Company: marconi
Module: RIP-MIB
Vendor: Marconi
Module: RIP-MIB (fore_rip.mib)
Type: TABULAR
Access: read-write
Syntax: TruthValue
Automatically extracted from www.mibdepot.com
ripAuthOn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If ripAuthOn TRUE enables authentication on this interface. All updates generated from this interface would be authenticated using specified authentication type set by ripIfAuthType" ::= {ripRciIfEntry 17}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.1.13.4.1.1 | ripIfIpAddress | 0 | 0 | Ip address of the interface running RIP |
| 1.3.6.1.4.1.326.1.13.4.1.2 | ripIfAddressLessIf | 0 | 0 | IfIndex of the interface running RIP |
| 1.3.6.1.4.1.326.1.13.4.1.3 | ripIfType | 0 | 0 | ripIftype |
| 1.3.6.1.4.1.326.1.13.4.1.4 | ripIfVersion | 0 | 0 | What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. ripSendCompat impli… |
| 1.3.6.1.4.1.326.1.13.4.1.5 | ripIfRecvVer | 0 | 0 | This indicates which version of RIP updates are to be accepted. Note that ripRcvVer2 and ripRcvVer1and2 implies reception of mul… |
| 1.3.6.1.4.1.326.1.13.4.1.6 | ripIfMetric | 0 | 0 | Value of metric corresponding to this interface. Metric value will be added to all routes leared from this interface |
| 1.3.6.1.4.1.326.1.13.4.1.7 | ripIfAcceptDefault | 0 | 0 | If ripIfAcceptDefault is TRUE then default routes will be accepted on this interface |
| 1.3.6.1.4.1.326.1.13.4.1.8 | ripIfSilent | 0 | 0 | If ripIfSilent is TRUE then no RIP updates would be sent of by this interface |
| 1.3.6.1.4.1.326.1.13.4.1.9 | ripIfRecvRoutes | 0 | 0 | If ripIfRecvRoutes is TRUE then RIP updates received on this interface are disregarded |
| 1.3.6.1.4.1.326.1.13.4.1.10 | ripIfSubnetsOnly | 0 | 0 | If ripIfSubnetsOnly is TRUE, then |
| 1.3.6.1.4.1.326.1.13.4.1.11 | ripIfSendDefaultOnly | 0 | 0 | If ripIfSendDefaultOnly is TRUE, RIP update from this interface would consist of only the default route |
| 1.3.6.1.4.1.326.1.13.4.1.12 | ripIfSendDefaultAlso | 0 | 0 | If ripIfSendDefaultAlso is TRUE, RIP update from this interface would consist of default route along with other routes |
| 1.3.6.1.4.1.326.1.13.4.1.13 | ripIfDfltRouteMetric | 0 | 0 | This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. |
| 1.3.6.1.4.1.326.1.13.4.1.14 | ripIfSplitHorizon | 0 | 0 | If ripIfSplitHorizon is TRUE, enables split horizon processing as defined in RFC 1058 |
| 1.3.6.1.4.1.326.1.13.4.1.15 | ripIfPoison | 0 | 0 | In ripIfPoison is TRUE, enables Poison reverse updates on this interface. (Poison reverse is defined in RCF 1058) |
| 1.3.6.1.4.1.326.1.13.4.1.16 | ripIfFlash | 0 | 0 | if ripIfFlash is TRUE flash updates will be sent out from this interface following a route change |
| 1.3.6.1.4.1.326.1.13.4.1.18 | ripIfAuthType | 0 | 0 | ripIfAuthtype |
| 1.3.6.1.4.1.326.1.13.4.1.19 | ripIfAuthKeyId | 0 | 0 | md5 authentication keyid used for this interface. RFC2082 describes md5 authentication and keyids |
| 1.3.6.1.4.1.326.1.13.4.1.20 | ripIfAuthKey | 0 | 0 | The value to be used as the Authentication Key whenever the corresponding instance of ripIfAuthType has a value other than noAuthe… |
| 1.3.6.1.4.1.326.1.13.4.1.21 | ripIfUpdateInterval | 0 | 0 | Time between 2 RIP updates for this interface |
| 1.3.6.1.4.1.326.1.13.4.1.22 | ripIfUpdateInterPktGap | 0 | 0 | Time between sending 2 packets of the same RIP update when update is more than 1 packet |
| 1.3.6.1.4.1.326.1.13.4.1.23 | ripIfPktsPerUpdate | 0 | 0 | Maximum number of packets allowed per update on this interface |
| 1.3.6.1.4.1.326.1.13.4.1.24 | ripIfPortDown | 0 | 0 | Indicates if port on which this interface exists is down. |
| 1.3.6.1.4.1.326.1.13.4.1.25 | ripIfRowStat | 0 | 0 | Administrative control over, creation and enabling RIP interface |