The value of this object identifies the desired
administrative status of this bi-directional PVC
segment. The active state means the PVC segment
is currently operational; the inactive state means
the PVC segment is currently not operational; the
testing state means the PVC segment is currently
undergoing a test. This state is set by an
administrative entity. This value affects the PVC
status indicated across the ingress NNI/UNI of
both end-points of the bi-directional PVC segment.
When a PVC segment connection is created using
this table, this object is initially set to
`inactive'. After the frPVCConnectRowStatus
object is set to `active' (and the
corresponding/associated entries in the
frPVCEndptTable have their frPVCEndptRowStatus
object set to `active'), the
frPVCConnectAdminStatus object may be set to
`active' to turn on the PVC segment connection.
Parsed from file rfc1604-internal.mib.txt
Company: marconi
Module: FORE-FRNETSERV-INTERNAL-MIB
Vendor: Marconi
Module: FORE-FRNETSERV-INTERNAL-MIB (rfc1604-internal.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
frPVCConnectAdminStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the desired administrative status of this bi-directional PVC segment. The active state means the PVC segment is currently operational; the inactive state means the PVC segment is currently not operational; the testing state means the PVC segment is currently undergoing a test. This state is set by an administrative entity. This value affects the PVC status indicated across the ingress NNI/UNI of both end-points of the bi-directional PVC segment. When a PVC segment connection is created using this table, this object is initially set to `inactive'. After the frPVCConnectRowStatus object is set to `active' (and the corresponding/associated entries in the frPVCEndptTable have their frPVCEndptRowStatus object set to `active'), the frPVCConnectAdminStatus object may be set to `active' to turn on the PVC segment connection." ::= { intfrPVCConnectEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.326.1.16.97.1.5.1.1 | frPVCConnectIndex | 0 | 0 | The value of this object is equal to the frPVCConnectIndexValue obtained to uniquely identify this PVC segment connection. |
1.3.6.1.4.1.326.1.16.97.1.5.1.2 | frPVCConnectLowIfIndex | 0 | 0 | The value of this object is equal to MIB II's ifIndex value of the UNI/NNI logical port for this PVC segment. The term low impli… |
1.3.6.1.4.1.326.1.16.97.1.5.1.3 | frPVCConnectLowDLCIIndex | 0 | 0 | The value of this object is equal to the DLCI value for this end-point of the PVC segment. If the value is equal to zero, then t… |
1.3.6.1.4.1.326.1.16.97.1.5.1.4 | frPVCConnectHighIfIndex | 0 | 0 | The value of this object is equal to MIB II's ifIndex value for the UNI/NNI logical port for this PVC segment. The term high imp… |
1.3.6.1.4.1.326.1.16.97.1.5.1.5 | frPVCConnectHighDLCIIndex | 0 | 0 | The value of this object is equal to the egress DLCI value for this end-point of the PVC segment. |
1.3.6.1.4.1.326.1.16.97.1.5.1.7 | frPVCConnectL2hOperStatus | 0 | 0 | The value of this object identifies the current operational status of the PVC segment connection in one direction; (i.e., in the … |
1.3.6.1.4.1.326.1.16.97.1.5.1.8 | frPVCConnectH2lOperStatus | 0 | 0 | The value of this object identifies the current operational status of the PVC segment connection in one direction; (i.e., in the … |
1.3.6.1.4.1.326.1.16.97.1.5.1.9 | frPVCConnectL2hLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this PVC segment entered its current operational state in the low to high dire… |
1.3.6.1.4.1.326.1.16.97.1.5.1.10 | frPVCConnectH2lLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this PVC segment entered its current operational state in the high to low dire… |
1.3.6.1.4.1.326.1.16.97.1.5.1.11 | frPVCConnectRowStatus | 0 | 0 | The status of this entry in the frPVCConnectTable. This variable is used to create new connections for the PVC end-points and to … |