Throughput is the average number of 'Frame Relay
Information Field' bits transferred per second across a
user network interface in one direction, measured over
the measurement interval.
If the configured committed burst rate and throughput
are both non-zero, the measurement interval, T, is
T=frCircuitCommittedBurst/frCircuitThroughput.
If the configured committed burst rate and throughput
are both zero, the measurement interval, T, is
T=frCircuitExcessBurst/ifSpeed.
Parsed from file frame-relay-dte-internal.mib.txt
Company: marconi
Module: FRAME-RELAY-DTE-INTERNAL-MIB
Vendor: Marconi
Module: FRAME-RELAY-DTE-INTERNAL-MIB (frame-relay-dte-internal.mib)
Type: TABULAR
Access: read-write
Syntax: Integer32
(
0..2147483647 )
Automatically extracted from www.mibdepot.com
frCircuitThroughput OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst rate and throughput are both non-zero, the measurement interval, T, is T=frCircuitCommittedBurst/frCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement interval, T, is T=frCircuitExcessBurst/ifSpeed." REFERENCE "American National Standard T1.617-1991, Section 6.5.19" DEFVAL {0} ::= { intfrCircuitEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.1.16.98.2.1.1 | frCircuitIfIndex | 0 | 0 | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.4.1.326.1.16.98.2.1.2 | frCircuitDlci | 0 | 0 | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.4.1.326.1.16.98.2.1.3 | frCircuitState | 0 | 0 | Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, … |
| 1.3.6.1.4.1.326.1.16.98.2.1.4 | frCircuitReceivedFECNs | 0 | 0 | Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when… |
| 1.3.6.1.4.1.326.1.16.98.2.1.5 | frCircuitReceivedBECNs | 0 | 0 | Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs whe… |
| 1.3.6.1.4.1.326.1.16.98.2.1.6 | frCircuitSentFrames | 0 | 0 | The number of frames sent from this virtual circuit since it was created. |
| 1.3.6.1.4.1.326.1.16.98.2.1.7 | frCircuitSentOctets | 0 | 0 | The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the… |
| 1.3.6.1.4.1.326.1.16.98.2.1.8 | frCircuitReceivedFrames | 0 | 0 | Number of frames received over this virtual circuit since it was created. |
| 1.3.6.1.4.1.326.1.16.98.2.1.9 | frCircuitReceivedOctets | 0 | 0 | Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, bu… |
| 1.3.6.1.4.1.326.1.16.98.2.1.10 | frCircuitCreationTime | 0 | 0 | The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a Set… |
| 1.3.6.1.4.1.326.1.16.98.2.1.11 | frCircuitLastTimeChange | 0 | 0 | The value of sysUpTime when last there was a change in the virtual circuit state |
| 1.3.6.1.4.1.326.1.16.98.2.1.12 | frCircuitCommittedBurst | 0 | 0 | This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during … |
| 1.3.6.1.4.1.326.1.16.98.2.1.13 | frCircuitExcessBurst | 0 | 0 | This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement… |