An entry is this table represents either a manually
setup or an automatically setup tunnel.
Parsed from file fore_mpls.mib.txt
Company: marconi
Module: FORE-MPLS-LSR-MIB
Vendor: Marconi
Module: FORE-MPLS-LSR-MIB (fore_mpls.mib)
Type: ENTRY
Access: not-accessible
Syntax: ForeMplsTunnelEntry
Automatically extracted from www.mibdepot.com
foreMplsTunnelEntry OBJECT-TYPE SYNTAX ForeMplsTunnelEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry is this table represents either a manually setup or an automatically setup tunnel." INDEX { mplsTunnelIndex } ::= { foreMplsTunnelTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.1.20.1.5.1.1 | mplsTunnelIndex | 0 | 0 | Index into this table identifying the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.2 | mplsTunnelName | 0 | 0 | The 'canonical' name assigned to the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.3 | mplsTunnelType | 0 | 0 | Type of the tunnel: originating on this node, terminating on this node, or both originating and terminating on this node. |
| 1.3.6.1.4.1.326.1.20.1.5.1.4 | mplsTunnelOrigId | 0 | 0 | IP address of the interface where the tunnel originates. |
| 1.3.6.1.4.1.326.1.20.1.5.1.5 | mplsTunnelTermId | 0 | 0 | IP address of the interface where the tunnel terminates. |
| 1.3.6.1.4.1.326.1.20.1.5.1.6 | mplsTunnelTermRid | 0 | 0 | Router ID where the tunnel terminates. |
| 1.3.6.1.4.1.326.1.20.1.5.1.7 | mplsTunnelProtocol | 0 | 0 | Indicates how the tunnel setup was initiated: either by a network administrator or automatically. |
| 1.3.6.1.4.1.326.1.20.1.5.1.8 | mplsTunnelAdminStatus | 0 | 0 | Adminstrative status of the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.9 | mplsTunnelOperStatus | 0 | 0 | Operational status of the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.10 | mplsTunnelEroTagIndex | 0 | 0 | The ERO tag configured for this tunnel. This ERO tag is referred to for picking a path for this tunnel. Either mplsTunnelEroTagI… |
| 1.3.6.1.4.1.326.1.20.1.5.1.11 | mplsTunnelTrafficSpecIndex | 0 | 0 | The traffic spec configured for this tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.12 | mplsTunnelUseDynamicERO | 0 | 0 | When set, the tunnels will use dynamically computed EROs to setup the path. Either mplsTunnelEroTagIndex be configured or mplsTun… |
| 1.3.6.1.4.1.326.1.20.1.5.1.13 | mplsTunnelPreference | 0 | 0 | The preference of the tunnel. Tunnels with a higher preference value are more likely to be used for forwarding. |
| 1.3.6.1.4.1.326.1.20.1.5.1.14 | mplsTunnelUsability | 0 | 0 | Specify whether the LSP is usable in forwarding packets. |
| 1.3.6.1.4.1.326.1.20.1.5.1.15 | mplsTunnelRowStatus | 0 | 0 | For creating, modifying and deleting this row. |
| 1.3.6.1.4.1.326.1.20.1.5.1.16 | mplsTunnelLastChangeTime | 0 | 0 | The time since the last change of operational state for this tunnal. |
| 1.3.6.1.4.1.326.1.20.1.5.1.17 | mplsTunnelRetryCount | 0 | 0 | Number of attempts made in trying to signal this tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.18 | mplsTunnelFailureCause | 0 | 0 | Reason for failure of tunnel to become operationally up |
| 1.3.6.1.4.1.326.1.20.1.5.1.19 | mplsTunnelOutIPInterface | 0 | 0 | The outgoing IP interface for this tunnel |
| 1.3.6.1.4.1.326.1.20.1.5.1.20 | mplsTunnelOutLabel | 0 | 0 | The outgoing label used for this tunnel |
| 1.3.6.1.4.1.326.1.20.1.5.1.21 | mplsTunnelInIPInterface | 0 | 0 | The incoming IP interface for this tunnel |
| 1.3.6.1.4.1.326.1.20.1.5.1.22 | mplsTunnelInLabel | 0 | 0 | The incoming label used for this tunnel |
| 1.3.6.1.4.1.326.1.20.1.5.1.23 | mplsTunnelOrigTunnelIndex | 0 | 0 | The tunnel index assigned to this tunnel on the originating router. |
| 1.3.6.1.4.1.326.1.20.1.5.1.24 | mplsTunnelOrigSignallingIndex | 0 | 0 | The call reference index used by signalling. For RSVP this would be the session lsp id. |
| 1.3.6.1.4.1.326.1.20.1.5.1.25 | mplsTunnelSignallingProto | 0 | 0 | The signalling protocol used to setup this tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.26 | mplsTunnelConfOutIPInterface | 0 | 0 | For tunnels that are not signalled, this parameter specifies the outgoing IP interface. |
| 1.3.6.1.4.1.326.1.20.1.5.1.27 | mplsTunnelConfOutLabel | 0 | 0 | For tunnels that are not signalled, this parameter specifies the outgoing label to use. |
| 1.3.6.1.4.1.326.1.20.1.5.1.28 | mplsTunnelPayloadType | 0 | 0 | The payload type of the tunnel. |
| 1.3.6.1.4.1.326.1.20.1.5.1.29 | mplsTunnelIncludeAdminGroups | 0 | 0 | Admin Groups that need to be used by this tunnel. The tunnel may use any link that has at least one admin group in common with … |
| 1.3.6.1.4.1.326.1.20.1.5.1.30 | mplsTunnelExcludeAdminGroups | 0 | 0 | Admin Groups that need to be avoided by this tunnel. They tunnel must exclude all links that have an admin group in common with… |
| 1.3.6.1.4.1.326.1.20.1.5.1.31 | mplsTunnelComputeDisjointEro | 0 | 0 | The type of disjoint path requested for this LSP. |
| 1.3.6.1.4.1.326.1.20.1.5.1.32 | mplsTunnelReferenceIndex | 0 | 0 | The tunnel whose path is referenced when computing a disjoint path. |
| 1.3.6.1.4.1.326.1.20.1.5.1.33 | mplsTunnelNumDisjointNodes | 0 | 0 | The number of nodes in the computed disjoint path that are disjoint from the reference path. |
| 1.3.6.1.4.1.326.1.20.1.5.1.34 | mplsTunnelNumDisjointLinks | 0 | 0 | The number of links in the computed disjoint path that are disjoint from the reference path. |
| 1.3.6.1.4.1.326.1.20.1.5.1.35 | mplsTunnelConfInIPInterface | 0 | 0 | For terminating tunnels that are not signalled, this parameter specifies the incoming IP interface. |
| 1.3.6.1.4.1.326.1.20.1.5.1.36 | mplsTunnelConfInLabel | 0 | 0 | For terminating tunnels that are not signalled, this parameter specifies the incoming label to use. |