Translating SNMPv1 notification parameters to SNMPv2 notification parameters (see IETF RFC 2576, section 3.1)
View at oid-info.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.15.0.1 | foreDsx3LOFDetected | 0 | 0 | This trap indicates that Loss Of Frame(LOF) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.2 | foreDsx3LOFCleared | 0 | 0 | This trap indicates that Loss Of Frame is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.3 | foreDsx3AISDetected | 0 | 0 | This trap indicates that AIS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.4 | foreDsx3AISCleared | 0 | 0 | This trap indicates that AIS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.5 | foreDsx3FERFDetected | 0 | 0 | This trap indicates that FERF Alarm or DS3 Yellow Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.6 | foreDsx3FERFCleared | 0 | 0 | This trap indicates that FERF Alarm or DS3 Yellow Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.7 | foreDsx3LOSDetected | 0 | 0 | This trap indicates that the specified DS3 port has detected incoming LOS Alarm. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.8 | foreDsx3LOSCleared | 0 | 0 | This trap indicates that the incoming LOS Alarm has been cleared on the specified DS3 port. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.9 | foreDsx3IdleDetected | 0 | 0 | This trap indicates that an Idle Maintenance Signal (IDLE) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.10 | foreDsx3IdleCleared | 0 | 0 | This trap indicates that an Idle Maintenance Signal (IDLE) is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.11 | foreDsx3TrailChangeDetected | 0 | 0 | This trap indicates that a Trail Trace Mismatch was detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.12 | foreDsx3PbitPerrDetected | 0 | 0 | This trap indicates that the specified DSX3 port is experiencing P-bit Parity errors. A P-bit Parity Error failure is declared wh… |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.13 | foreDsx3PbitPerrCleared | 0 | 0 | This trap indicates that the P-bit Parity Error failure identified by trap asxDS3PbitPerrDetected has been cleared. A P-bit Parit… |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.14 | foreDsx3FramingFEBEDetected | 0 | 0 | This trap indicates that Framing FEBE anomaly alarm was detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.15 | foreDsx3FramingFEBECleared | 0 | 0 | This trap indicates that Framing FEBE anomaly alarm was detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.16 | foreDsx3E3FramingFEBEDetected | 0 | 0 | This trap indicates that Framing FEBE anomaly alarm was detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.1.1.15.0.17 | foreDsx3E3FramingFEBECleared | 0 | 0 | This trap indicates that Framing FEBE anomaly alarm was detected on the incoming signal. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.15.1 | foreDsx3ConfigTable | 1 | 12 | A table of configuration options, statistics, and diagnostics supported by DS3 interfaces on Fore Systems ATM Switches. |
| 1.3.6.1.4.1.326.2.2.1.1.15.2 | foreDsx3TotalTable | 1 | 12 | A table of statistics, supported by DS3 interfaces on Fore Systems Equipment. |
| 1.3.6.1.4.1.326.2.2.1.1.15.3 | foreDsx3PerformanceAnomalyTable | 1 | 3 | This forms the per interface performance Anomaly threshold configuration table |
| 1.3.6.1.4.1.326.2.2.1.1.15.4 | foreDsx3MiscTable | 1 | 5 | Table of DSX3 miscellaneous information. |