This variable describes the variety of Zero Code suppression
used on this interface, which in turn affects a number of its
characteristics. e3HDB3 (1) refers to the use of specified
pattern of normal bits and bipolar violations which are used to
replaced sequences of zero bits of specified length. This
variable is defined in the rfc1407 configuration table as
dsx3LineCoding.
Parsed from file fore-e3.mib.txt
Company: None
Module: Fore-E3-MIB
This variable describes the variety of Zero Code suppression
used on this interface, which in turn affects a number of its
characteristics. e3HDB3 (1) refers to the use of specified
pattern of normal bits and bipolar violations which are used to
replaced sequences of zero bits of specified length. This
variable is defined in the rfc1407 configuration table as
dsx3LineCoding.
Parsed from file Fore-E3-MIB.mib
Module: Fore-E3-MIB
Vendor: Fore Systems, Inc.
Module: Fore-E3-MIB
[Automatically extracted from oidview.com]
e3LineCoding OBJECT-TYPE SYNTAX INTEGER { e3OtherLineCoding (1), e3HDB3 (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the variety of Zero Code suppression used on this interface, which in turn affects a number of its characteristics. e3HDB3 (1) refers to the use of specified pattern of normal bits and bipolar violations which are used to replaced sequences of zero bits of specified length. This variable is defined in the rfc1407 configuration table as dsx3LineCoding." DEFVAL { e3HDB3 } ::= { e3ConfEntry 5 }
e3LineCoding OBJECT-TYPE SYNTAX INTEGER { e3OtherLineCoding (1), e3HDB3 (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the variety of Zero Code suppression used on this interface, which in turn affects a number of its characteristics. e3HDB3 (1) refers to the use of specified pattern of normal bits and bipolar violations which are used to replaced sequences of zero bits of specified length. This variable is defined in the rfc1407 configuration table as dsx3LineCoding." DEFVAL { e3HDB3 } ::= { e3ConfEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.1 | e3ConfBoard | 0 | 0 | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.2 | e3ConfModule | 0 | 0 | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.3 | e3ConfPort | 0 | 0 | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.4 | e3LineType | 0 | 0 | This variable indicates the type of cell delineation being used. The e3Plcp(3) value indicates cell delineation according to CCIT… |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.6 | e3SendCode | 0 | 0 | This variable indicates what type of code is being sent across the E3/E3 interface by the device. The values mean: e3SendNoCode s… |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.7 | e3ReceiveCode | 0 | 0 | This variable indicates the type of code that was received across the E3/E3 interface. The values mean: e3ReceiveNoCode receiving … |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.8 | e3LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the E3 interface. This variable is defined in the rfc1407 configuration ta… |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.9 | e3TxClockSource | 0 | 0 | The source of the transmit clock. |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.10 | e3RxScrambling | 0 | 0 | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting … |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.11 | e3TxScrambling | 0 | 0 | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the s… |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.12 | e3LineStatus | 0 | 0 | This variable indicates the Line Status of the interface. A similar object is defined in the rfc1407 configuration table as dsx3L… |
| 1.3.6.1.4.1.326.2.2.1.1.5.1.1.1.13 | e3IdleUnassignedCells | 0 | 0 | This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum,… |