The object provides a way to prevent HOL (Head Of Line) blocking
between ports. HOL protection may prevent forwarding a packet to
a blocking port.The idea relies on the assumption that it is better
to discard packets destined to blocking ports, then to let them consume
more and more buffers in the input-port's Rx-counters because eventually
these input ports may become totally blocked. The meanings of the values
are:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disabled(2) - HOL function disable for device.
enabled(3) - HOL function enable for device.
Parsed from file es1200.mib.txt
Company: None
Module: ES1200-MIB
The object provides a way to prevent HOL (Head Of Line) blocking
between ports. HOL protection may prevent forwarding a packet to
a blocking port.The idea relies on the assumption that it is better
to discard packets destined to blocking ports, then to let them consume
more and more buffers in the input-port's Rx-counters because eventually
these input ports may become totally blocked. The meanings of the values
are:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disabled(2) - HOL function disable for device.
enabled(3) - HOL function enable for device.
Parsed from file ES1200-MIB.mib
Module: ES1200-MIB
Vendor: Fore Systems, Inc.
Module: ES1200-MIB
[Automatically extracted from oidview.com]
swL2DevCtrlHOLState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3), notAvailable(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port.The idea relies on the assumption that it is better to discard packets destined to blocking ports, then to let them consume more and more buffers in the input-port's Rx-counters because eventually these input ports may become totally blocked. The meanings of the values are: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - HOL function disable for device. enabled(3) - HOL function enable for device." ::= { swL2DevCtrl 4 }
swL2DevCtrlHOLState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3), notAvailable(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port.The idea relies on the assumption that it is better to discard packets destined to blocking ports, then to let them consume more and more buffers in the input-port's Rx-counters because eventually these input ports may become totally blocked. The meanings of the values are: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - HOL function disable for device. enabled(3) - HOL function enable for device." ::= { swL2DevCtrl 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.4.0 | swL2DevCtrlHOLState | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.1 | swL2DevCtrlStpState | 1 | 1 | This object can be enabled or disabled spanning tree algorithm during runtime of the system. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.2 | swL2DevCtrlPartitionModeState | 1 | 1 | This object used to enable or disable port auto partition. When the object apply for all ports of the device |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.3 | swL2DevCtrlTableLockState | 1 | 1 | This object indicates whether the address table is locked. In other words, the address table doesn't learn any more new address.… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.5 | swL2DevCtrlAddrLookupModesAndHitRate | 1 | 1 | According to the differnet address looke mode setting, to enlarge the address table size is possible in device. But there is sid… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.6 | swL2DevCtrlUploadImageFileName | 1 | 1 | The name of the image file to be uploaded from the device to TFTP server when enabling image upload function (by writing swDevCt… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.7 | swL2DevCtrlUploadImage | 1 | 1 | Image file upload control. Writing it by any value will immediately invoke image upload function. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.8 | swL2DevCtrlClearAddressTable | 1 | 1 | This object indicates the agent clear address table. Setting this object to clear(2) will clear address table. The agent alwats r… |