Dsr control lead display
Parsed from file CP90.mib.txt
Company: marconi
Module: CELLPATH90-MIB
Vendor: Marconi
Module: CELLPATH90-MIB (CP90.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
dteLeadDsr OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Dsr control lead display" ::= { dteEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.326.2.5.1.4.1.1 | dteNumber | 0 | 0 | Dte sequential number |
1.3.6.1.4.1.326.2.5.1.4.1.2 | dteType | 0 | 0 | Type of dte: Serial , Ethernet or fractional DS1 |
1.3.6.1.4.1.326.2.5.1.4.1.3 | dteSerialType | 0 | 0 | Type of serial DTE V35 or RS-449 |
1.3.6.1.4.1.326.2.5.1.4.1.4 | dteRate | 0 | 0 | Rate of traffic for dte port |
1.3.6.1.4.1.326.2.5.1.4.1.5 | dteSct | 0 | 0 | Send clock timing selection |
1.3.6.1.4.1.326.2.5.1.4.1.6 | dteGapMode | 0 | 0 | Dte clocking mode (continuous or gapped) |
1.3.6.1.4.1.326.2.5.1.4.1.7 | dteOpMode | 0 | 0 | Type of encapsulation for DTE data |
1.3.6.1.4.1.326.2.5.1.4.1.8 | dteLoop | 0 | 0 | DTE loopback ON/OFF |
1.3.6.1.4.1.326.2.5.1.4.1.9 | dteAlarmsOn | 0 | 0 | DTE alarms display ON\OFF |
1.3.6.1.4.1.326.2.5.1.4.1.10 | dteCntDsr | 0 | 0 | Dsr control lead setting |
1.3.6.1.4.1.326.2.5.1.4.1.11 | dteCntRlsd | 0 | 0 | Rlsd control lead setting |
1.3.6.1.4.1.326.2.5.1.4.1.12 | dteCntCts | 0 | 0 | Cts control lead setting |
1.3.6.1.4.1.326.2.5.1.4.1.13 | dteCntTm | 0 | 0 | Tm control lead setting |
1.3.6.1.4.1.326.2.5.1.4.1.14 | dteDetect | 0 | 0 | Criteria to detect lost DTE |
1.3.6.1.4.1.326.2.5.1.4.1.16 | dteLeadRlsd | 0 | 0 | Rlsd control lead display |
1.3.6.1.4.1.326.2.5.1.4.1.17 | dteLeadCts | 0 | 0 | Cts control lead display |
1.3.6.1.4.1.326.2.5.1.4.1.18 | dteLeadTm | 0 | 0 | Tm control lead display |
1.3.6.1.4.1.326.2.5.1.4.1.19 | dteLeadDtr | 0 | 0 | Dtr control lead display |
1.3.6.1.4.1.326.2.5.1.4.1.20 | dteLeadRts | 0 | 0 | Rts control lead display |
1.3.6.1.4.1.326.2.5.1.4.1.21 | dteLeadLt | 0 | 0 | Lt control lead display |
1.3.6.1.4.1.326.2.5.1.4.1.22 | dteFrmMode | 0 | 0 | DS1 framing mode |
1.3.6.1.4.1.326.2.5.1.4.1.23 | dteLineCode | 0 | 0 | DS1 interface line encoding |
1.3.6.1.4.1.326.2.5.1.4.1.24 | dteEQL | 0 | 0 | Equalization for T1 dte interface |
1.3.6.1.4.1.326.2.5.1.4.1.25 | dteInternationalBit | 0 | 0 | International bit setting for E1 dte interface |
1.3.6.1.4.1.326.2.5.1.4.1.26 | dteAdditionalBits | 0 | 0 | Additional bits (Sa4 thru Sa8) setting for E1 dte interface. 0x10 would set Sa4 only, 0x01 would set Sa8 only, 0x1F would set Sa4 … |
1.3.6.1.4.1.326.2.5.1.4.1.27 | dteFt1Chan | 0 | 0 | Channel map for fractional T1 |
1.3.6.1.4.1.326.2.5.1.4.1.28 | dteEtherPolarity | 0 | 0 | Ethernet filtering polarity. |
1.3.6.1.4.1.326.2.5.1.4.1.29 | dteEtherProtocol | 0 | 0 | RFC-1483 Ethernet bridging encapsulation protocol |
1.3.6.1.4.1.326.2.5.1.4.1.30 | dteBurstSize | 0 | 0 | Maximum burst size |