Vendor: 3Com
Module: Centrum-MIB (3Com-ab.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
adminMisc OBJECT IDENTIFIER ::= { admin 9 }
adminMisc OBJECT IDENTIFIER ::= { admin 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.327.1.1.6.9.1 | adminSysDescr | 1 | 1 | Same as sysDescr in MIB II. |
| 1.3.6.1.4.1.327.1.1.6.9.2 | adminNodeName | 1 | 1 | The login ID that is transmitted by this node to a remote router at connection establishing time. If the string is not what the r… |
| 1.3.6.1.4.1.327.1.1.6.9.3 | adminNodePassword | 1 | 1 | The password that is transmitted by this node to a remote router after login ID at connection establishing time. If the string is… |
| 1.3.6.1.4.1.327.1.1.6.9.4 | adminDate | 1 | 1 | Current date in mm/dd/yy format. |
| 1.3.6.1.4.1.327.1.1.6.9.5 | adminTime | 1 | 1 | Current time in hh:mm:ss format. |
| 1.3.6.1.4.1.327.1.1.6.9.6 | adminGreeting | 1 | 1 | A user-defined text that is displayed when a user logs into User Interface process. |
| 1.3.6.1.4.1.327.1.1.6.9.7 | adminPrompt | 1 | 1 | An user-defined prompt string for this node's User Interface process. Note: This one is obsoleted after version 3.1 or later |
| 1.3.6.1.4.1.327.1.1.6.9.8 | adminSNMPGetFrom | 1 | 1 | The value controls the type value returned to an SNMP GET command. Setting this to '1' requests that the current operational valu… |
| 1.3.6.1.4.1.327.1.1.6.9.9 | adminDoIntegrity | 1 | 1 | A write to this variable (value don't care) cause an integrity check on all the configuration parameters. The result is given thr… |
| 1.3.6.1.4.1.327.1.1.6.9.10 | adminDoFileload | 1 | 1 | A write to this variable (value don't care) cause a fileload (upload or download depending on LoadFileName) operation to start. T… |
| 1.3.6.1.4.1.327.1.1.6.9.11 | adminLoadfileName | 1 | 1 | The name of the file upon which the file-load operation is to be operated. |
| 1.3.6.1.4.1.327.1.1.6.9.13 | adminLastTrap | 1 | 1 | The last trap message contents. |
| 1.3.6.1.4.1.327.1.1.6.9.14 | adminResetAllUserCounters | 1 | 1 | Writing any value to this variable will reset all User-related counters to zero. |
| 1.3.6.1.4.1.327.1.1.6.9.15 | adminEraseConfig | 1 | 1 | Erase all configuration data in EEPROM. |
| 1.3.6.1.4.1.327.1.1.6.9.16 | adminUIMsgLevel | 1 | 1 | This variable controls type of system messages to be displayed on system console. Messages of priority equals or higher than the… |
| 1.3.6.1.4.1.327.1.1.6.9.17 | adminSNMPMsgLevel | 1 | 1 | This variable controls type of system messages to be sent to SNMP management stations. Messages of priority equals or higher tha… |
| 1.3.6.1.4.1.327.1.1.6.9.18 | adminLoginOption | 1 | 1 | This variable enable the login sequence on async ports. |
| 1.3.6.1.4.1.327.1.1.6.9.19 | adminReboot | 1 | 1 | Reboot the AccessBuilder server. |
| 1.3.6.1.4.1.327.1.1.6.9.20 | adminMajorVersion | 1 | 1 | AccessBuilder software Major version. |
| 1.3.6.1.4.1.327.1.1.6.9.21 | adminMinorVersion | 1 | 1 | AccessBuilder software Minor version. |
| 1.3.6.1.4.1.327.1.1.6.9.22 | adminMIBVersion | 1 | 1 | This MIB version. |
| 1.3.6.1.4.1.327.1.1.6.9.23 | adminTimeZone | 1 | 1 | Time difference between local time zone and Greenwich time (in minutes). |
| 1.3.6.1.4.1.327.1.1.6.9.24 | adminSecurityServerType | 1 | 1 | Enables authentication through security helpers instead of local user database. |
| 1.3.6.1.4.1.327.1.1.6.9.25 | adminSecPassword | 1 | 1 | The password is used to set up a session with security helpers. |
| 1.3.6.1.4.1.327.1.1.6.9.26 | adminScrtyClntIpAddr | 1 | 1 | The primary security helper's IP address. |
| 1.3.6.1.4.1.327.1.1.6.9.27 | adminSecondScrtyClntIpAddr | 1 | 1 | The secondary security helper's IP address. |
| 1.3.6.1.4.1.327.1.1.6.9.28 | adminUdpPort | 1 | 1 | This is the UDP port for the security helper protocol. |
| 1.3.6.1.4.1.327.1.1.6.9.29 | adminTelnetAdminPort | 1 | 1 | This is the telnet administration port for dialout function. |
| 1.3.6.1.4.1.327.1.1.6.9.30 | adminTelnetDialOutAuth | 1 | 1 | Enables authentication for dialout function. |
| 1.3.6.1.4.1.327.1.1.6.9.31 | adminDialOutEnabled | 1 | 1 | Enables dialout function. |
| 1.3.6.1.4.1.327.1.1.6.9.32 | adminEncryptNodePassword | 1 | 1 | The encrypted node password is for configurator to change node password by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.33 | adminEncryptSecurityServerType | 1 | 1 | The encrypted security server type is for configurator to change security server type by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.34 | adminEncryptSecPassword | 1 | 1 | The encrypted security password is for configurator to change security password by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.35 | adminEncryptScrtyClntIpAddr | 1 | 1 | The encrypted helper IP address is for configurator to change helper IP address by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.36 | adminEncryptSecondScrtyClntIpAddr | 1 | 1 | The encrypted secondary helper IP address is for configurator to change secondary helper IP address by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.37 | adminEncryptUdpPort | 1 | 1 | The encrypted helper UDP port is for configurator to change helper UDP port by a authentication algorithm. |
| 1.3.6.1.4.1.327.1.1.6.9.38 | adminEPromSize | 1 | 1 | This is the EProm size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.39 | adminNVRamSize | 1 | 1 | This is the Non-Volatile Ram (EEProm) size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.40 | adminFlashRomSize | 1 | 1 | This is the Flash Rom size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.41 | adminLocalDRamSize | 1 | 1 | This is the Local DRam size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.42 | adminSharedDRamSize | 1 | 1 | This is the Shared DRam size on the mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.43 | adminHWRev | 1 | 1 | This is the hardware revision on mother board. |
| 1.3.6.1.4.1.327.1.1.6.9.44 | adminEncryptSuperUserPassword | 1 | 1 | The encrypted superuser password is for configurator to get the superuser password. |
| 1.3.6.1.4.1.327.1.1.6.9.45 | adminNewGreeting | 1 | 1 | A user-defined text that is displayed when a user logs into User Interface process. |
| 1.3.6.1.4.1.327.1.1.6.9.46 | adminTFTPServerIpAddr | 1 | 1 | The TFTP server's IP address. |
| 1.3.6.1.4.1.327.1.1.6.9.47 | adminSaveConfig | 1 | 1 | A write to this variable (value don't care) cause a save configuration operation to start. The result is given through a GET of t… |
| 1.3.6.1.4.1.327.1.1.6.9.48 | adminMaintenanceVersion | 1 | 1 | AccessBuilder software Maintenance version. |
| 1.3.6.1.4.1.327.1.1.6.9.49 | adminCheckConsoleModem | 1 | 1 | Check the status of console modem. |
| 1.3.6.1.4.1.327.1.1.6.9.50 | adminConsoleImageDownload | 1 | 1 | Download image by console port. |
| 1.3.6.1.4.1.327.1.1.6.9.51 | adminConsoleConfigUpload | 1 | 1 | Upload configuration by console port. |
| 1.3.6.1.4.1.327.1.1.6.9.52 | adminConsoleConfigDownload | 1 | 1 | Download configuration by console port. |
| 1.3.6.1.4.1.327.1.1.6.9.53 | adminRasIdleTime | 1 | 1 | The idle time to start spoofing for ras port. |
| 1.3.6.1.4.1.327.1.1.6.9.54 | adminRouterIdleTime | 1 | 1 | The idle time to start spoofing for router port. |
| 1.3.6.1.4.1.327.1.1.6.9.55 | adminRasSpoofTime | 1 | 1 | adminRasSpooftime |
| 1.3.6.1.4.1.327.1.1.6.9.56 | adminRouterSpoofTime | 1 | 1 | adminRouterSpooftime |
| 1.3.6.1.4.1.327.1.1.6.9.57 | adminLnkUtilHighThld | 1 | 1 | adminLnkUtilHighthld |
| 1.3.6.1.4.1.327.1.1.6.9.58 | adminLnkUtilLowThld | 1 | 1 | Link utilization low threshold. |
| 1.3.6.1.4.1.327.1.1.6.9.59 | adminCallerIdCheck | 1 | 1 | Indicate to check caller id or not. |
| 1.3.6.1.4.1.327.1.1.6.9.60 | adminISDNRequiredBaudrate | 1 | 1 | For baudrate adaption of ISDN call. |
| 1.3.6.1.4.1.327.1.1.6.9.61 | adminRouterCCPEnabled | 1 | 1 | Turn on/off CCP for remotepath. |
| 1.3.6.1.4.1.327.1.1.6.9.62 | adminSuggestFlag | 1 | 1 | Turn on/off for ignoring some trivial error message. |
| 1.3.6.1.4.1.327.1.1.6.9.63 | adminEEVersionNo | 1 | 1 | The EE version number, format is Major, Miror, Maintence and Patch |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.327.1.1.6.1 | adminUserNumber | 1 | 1 | The number of users registered on this system. |
| 1.3.6.1.4.1.327.1.1.6.2 | adminUserTable | 1 | 8 | User table. |
| 1.3.6.1.4.1.327.1.1.6.3 | adminCommNumber | 1 | 1 | The number of SNMP communities defined on this system. |
| 1.3.6.1.4.1.327.1.1.6.4 | adminCommTable | 1 | 7 | SNMP community table. |
| 1.3.6.1.4.1.327.1.1.6.5 | adminScriptNumber | 1 | 1 | The number of dialing scripts on this system. |
| 1.3.6.1.4.1.327.1.1.6.6 | adminScriptTable | 1 | 5 | Dialing script table. |
| 1.3.6.1.4.1.327.1.1.6.7 | adminRpaLogNumber | 1 | 1 | The number of remote PC access session log entries in this system. |
| 1.3.6.1.4.1.327.1.1.6.8 | adminRpaLogTable | 1 | 17 | Remote PC access session log table. |
| 1.3.6.1.4.1.327.1.1.6.10 | adminMdSetupNumber | 1 | 1 | The number of dialing Modem Setups on this system; this table serves as a template to create 'real' modem script. |
| 1.3.6.1.4.1.327.1.1.6.11 | adminMdSetupTable | 1 | 10 | Dialing Modem Setup table. |
| 1.3.6.1.4.1.327.1.1.6.12 | adminCallerIDNumber | 1 | 1 | Caller Id Number. |
| 1.3.6.1.4.1.327.1.1.6.13 | adminCallerIDTable | 1 | 5 | None |