Control whether demo key testing is going on.
Parsed from file it-router-12.mib.txt
Company: inreach
Module: IT-ROUTER-12
sysFeatDemoTest OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control whether demo key testing is going on." ::= { xSystem 44 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.1.44.0 | sysFeatDemoTest | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.1.1 | resourceLack, sysIdent | 1 | 1 | An identification string for local and remote displays. Corresponds directly to SERVER IDENTIFICATION and the value labeled 'Iden… |
| 1.3.6.1.4.1.33.1.2 | sysDefineMode | 1 | 1 | The system's operation with regard to DEFINE commands. 'permOnly' indicates that DEFINE commands modify only the permanent data … |
| 1.3.6.1.4.1.33.1.3 | sysDateTime | 1 | 1 | The system's current local date and time. Corresponds directly to SERVER DATE and SERVER TIME and the value in various displays. |
| 1.3.6.1.4.1.33.1.4 | sysTimeZone | 1 | 1 | The adjustment to apply to a universal (Greenwich) time received when down-line loaded, comprising two octets. The first octet i… |
| 1.3.6.1.4.1.33.1.5 | sysLoadSoftware | 1 | 1 | The software file name to request for down-line load of the server. Corresponds directly to SERVER SOFTWARE, and the value label… |
| 1.3.6.1.4.1.33.1.6 | sysDump | 1 | 1 | Control for dumping the system's memory when the system crashes. Corresponds directly to SERVER DUMP and the presence of 'Dump' … |
| 1.3.6.1.4.1.33.1.7 | sysMaintenancePassword | 1 | 1 | The password a management system must supply to force the system to reboot or use the system's remote console via the Maintenance… |
| 1.3.6.1.4.1.33.1.8 | sysLocalName | 1 | 1 | The system's local name. Corresponds directly to SERVER NAME and the value labeled 'Name:' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.9 | sysSoftwareVersionType | 1 | 1 | The software version variant running in the system. Corresponds to the letter in the software version in the SERVER CHARACTERISTI… |
| 1.3.6.1.4.1.33.1.10 | sysSoftwareVersion | 1 | 1 | The software version running in the system. In order, the octets contain major version, minor version, ECO, and pre-release numb… |
| 1.3.6.1.4.1.33.1.11 | sysRomVersion | 1 | 1 | The firmware version of the bootstrap ROM installed in the system. Corresponds directly to the value labeled 'Rom' in the SERVER… |
| 1.3.6.1.4.1.33.1.12 | sysHardwareType | 1 | 1 | The type of hardware on which the system is running. Corresponds directly to the value labeled 'Hardware Type:' in the UNIT disp… |
| 1.3.6.1.4.1.33.1.13 | sysHardwareVersion | 1 | 1 | This version of hardware on which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CH… |
| 1.3.6.1.4.1.33.1.14 | sysChassisType | 1 | 1 | The type of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTE… |
| 1.3.6.1.4.1.33.1.15 | sysChassisVersion | 1 | 1 | This version of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHA… |
| 1.3.6.1.4.1.33.1.16 | sysCrash | 1 | 1 | Control to cause this system to crash. In response to a get-request or get-next-request, the agent always returns 'ready' for th… |
| 1.3.6.1.4.1.33.1.17 | sysInitialize | 1 | 1 | Control to cause this system to reset its software to initial load values, typically by reloading. When executing an initialize c… |
| 1.3.6.1.4.1.33.1.18 | sysInitializeDelay | 1 | 1 | The number of minutes to delay before beginning the system initialization process as executed with sysInitialize. This value canno… |
| 1.3.6.1.4.1.33.1.19 | sysZeroAll | 1 | 1 | Control to zero all counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value.… |
| 1.3.6.1.4.1.33.1.20 | sysZeroBase | 1 | 1 | Control to zero all base counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this v… |
| 1.3.6.1.4.1.33.1.21 | sysZeroBaseTime | 1 | 1 | The number hundredths of a second since the most recent zeroing of the base counters, such as through execution of sysZeroAll or … |
| 1.3.6.1.4.1.33.1.22 | sysLoaderName | 1 | 1 | The name of the system that provided this system's running software. Corresponds directly to the value labeled 'Primary Host:' i… |
| 1.3.6.1.4.1.33.1.23 | sysLoaderAddressType | 1 | 1 | The type of network address contained in sysLoaderAddress. 'unknown' means no address has been defined. 'other' means no other … |
| 1.3.6.1.4.1.33.1.24 | sysLoaderAddress | 1 | 1 | The network address of the system that provided this system's running software. Corresponds directly to the value labeled 'Load … |
| 1.3.6.1.4.1.33.1.25 | sysDumperAddressType | 1 | 1 | The type of network address contained in sysDumperAddress. 'unknown' means no address has been defined. 'other' means no other … |
| 1.3.6.1.4.1.33.1.26 | sysDumperAddress | 1 | 1 | The network address of the system that most recently accepted a crash dump from this system. Corresponds directly to the value la… |
| 1.3.6.1.4.1.33.1.27 | sysResourceLacks | 1 | 1 | The number of times a local resource allocation failed, for example due to lack of dynamic memory. Corresponds directly to the va… |
| 1.3.6.1.4.1.33.1.28 | sysChassisState | 1 | 1 | For chassis-based systems, the state of the overall chassis. 'notApplicable' indicates the system is not chassis based. 'noFaul… |
| 1.3.6.1.4.1.33.1.29 | sysChassisFaultTransitions | 1 | 1 | The number of times this system has seen sysChassisState switch from 'noFault' to 'fault' or from 'fault' to 'noFault'. Correspo… |
| 1.3.6.1.4.1.33.1.30 | sysResourceNumber | 1 | 1 | The number of resource entries in the Resource table. |
| 1.3.6.1.4.1.33.1.31 | sysFeatureNumber | 1 | 1 | The number of feature entries in the Feature table. |
| 1.3.6.1.4.1.33.1.32 | resTable | 1 | 8 | A list of resource entries. The number of entries is given by the value of sysResourceNumber. |
| 1.3.6.1.4.1.33.1.33 | featTable | 1 | 7 | A list of feature entries. The number of entries is given by the value of sysFeatureNumber. |
| 1.3.6.1.4.1.33.1.34 | xBootControl, bootControl | 19 | 38 | None |
| 1.3.6.1.4.1.33.1.35 | sysInstalledMemory | 1 | 1 | The total number of bytes of main memory installed in the system. Corresponds directly to the value labeled 'Installed' on the S… |
| 1.3.6.1.4.1.33.1.36 | sysTemperatureLevel | 1 | 1 | The temperature level of the system. 'unknown' indicates the system does not support a temperature sensor. 'normal' indicates a… |
| 1.3.6.1.4.1.33.1.37 | bootRecordTable | 1 | 26 | A list of boot control records. |
| 1.3.6.1.4.1.33.1.38 | sysLastAgentError | 1 | 1 | The most recent error the agent encountered in attempting to satisfy an SNMP request. Reading this value has the side effect of … |
| 1.3.6.1.4.1.33.1.39 | xSystemConformance | 2 | 2 | None |
| 1.3.6.1.4.1.33.1.40 | sysRcpMulticast | 1 | 1 | Control for sending of the MOP RCP system identifier message. Corresponds directly to the presence of 'RCP Multicast' under the … |
| 1.3.6.1.4.1.33.1.41 | sysTimeServerAddress | 1 | 1 | The address of the time server, either an IpAddr or an ethernet address. |
| 1.3.6.1.4.1.33.1.42 | sysTimeServer | 1 | 1 | Control whether we will provide the time to other systems that request it. |
| 1.3.6.1.4.1.33.1.43 | sysPacketBufferSize | 1 | 1 | Control the maximum packet buffer size that this system will allocate. |
| 1.3.6.1.4.1.33.1.45 | sysFeatDemoTestTimeLeft | 1 | 1 | Control the time left before the demo keys expire. |
| 1.3.6.1.4.1.33.1.46 | sysTimeServerConfiguredAddress | 1 | 1 | The address of a configured time server (, either an IpAddr or an ethernet address). |
| 1.3.6.1.4.1.33.1.47 | sysTimeServerConfiguredStatus | 1 | 1 | Control whether the sysTimeServerConfiguredAddress is the only time server used to obtain the time (REQUIRED), the first time ser… |
| 1.3.6.1.4.1.33.1.48 | sysBootRecordOverrideDefinedAddress, sysTimeServerConfiguredIpAddress | 1 | 1 | Control to override the internally defined Internet address with that obtained from the bootp loading protocol. |
| 1.3.6.1.4.1.33.1.49 | sysBootRecordMessageEnable, sysTimeServerIpAddress | 1 | 1 | Control to display load status messages during reboot. Corresponds directly to the value labeled 'Status Message:' in the SERVER … |
| 1.3.6.1.4.1.33.1.50 | sysBootRecordParamDefaults | 1 | 1 | Control to use default parameters upon the next reboot after which time this control reverts to disabled. This control only appli… |
| 1.3.6.1.4.1.33.1.77 | sysLoginAuthFailureTrapAdminState | 1 | 1 | Controls whether this unit sends login authentication failure traps. |
| 1.3.6.1.4.1.33.1.78 | sysLoginAuthFailureTrapType | 1 | 1 | Indicates the type of authentication failure which last occurred. |
| 1.3.6.1.4.1.33.1.79 | sysLoginAuthTrapAccessPoint | 1 | 1 | sysLoginAuthtrapAccessPoint |
| 1.3.6.1.4.1.33.1.80 | sysLoginAuthTrapCircuit | 1 | 1 | sysLoginAuthtrapCircuit |
| 1.3.6.1.4.1.33.1.81 | sysLoginAuthTrapIdentity | 1 | 1 | sysLoginAuthtrapIdentity |
| 1.3.6.1.4.1.33.1.82 | sysLocalScriptServer | 1 | 1 | Control to allow script serving for this system from a script residing in a local flash card. |
| 1.3.6.1.4.1.33.1.83 | sysInReachManagementSecurityStatus | 1 | 1 | Indicates whether per port authentication is in use. This includes username, password, privilege level, and list of power outlets… |
| 1.3.6.1.4.1.33.1.84 | sysProductName | 1 | 1 | Displays the product name of this system. |
| 1.3.6.1.4.1.33.1.85 | sysModemPresent | 1 | 1 | Indicates whether this system has a built-in modem. |
| 1.3.6.1.4.1.33.1.86 | sysCauseAction | 1 | 1 | A control for toggling the cause action feature. Corresponds directly to the presence of 'Trigger/Action' under the label 'Enable… |
| 1.3.6.1.4.1.33.1.87 | sysWebServerConfigAdminStatus | 1 | 1 | A control for bring the web server up or down. Corresponds directly to the presence of 'Web Server' under the label 'Enabled Char… |
| 1.3.6.1.4.1.33.1.88 | sysTl1SourceIdentifier | 1 | 1 | The source identifier (SID) is the server name used by TL1 to identify the server. |
| 1.3.6.1.4.1.33.1.89 | sysInitializeDelayParameter | 1 | 1 | Control to begin the system initialization process providing that at least one parameter server is current. Corresponds directly … |
| 1.3.6.1.4.1.33.1.90 | sysTimeProtocol | 1 | 1 | Indicates whether the SNTP protocol is used to obtain the time at startup. If disabled, the older TIMED protocol is used. Both pr… |
| 1.3.6.1.4.1.33.1.91 | sysTimeBroadcast | 1 | 1 | Indicates whether the unit will broadcast for the time at startup. |