This object determines how many seconds without
an echo reply must elapse before the connection
is declared down. If echo requests are not sent,
this object has no effect.
Parsed from file it-router-12.mib.txt
Company: inreach
Module: IT-ROUTER-12
xPppConfigMaxEchoLoss OBJECT-TYPE SYNTAX INTEGER ( 2..20 ) ACCESS read-write STATUS mandatory DESCRIPTION "This object determines how many seconds without an echo reply must elapse before the connection is declared down. If echo requests are not sent, this object has no effect." DEFVAL { 3 } ::= { xPppConfigEntry 19 }
Vendor: In-Reach
Module: IT-ROUTER-12 (it-router-12.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
(
2..20 )
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.22.1.1.1.1 | xPppConfigOpen | 0 | 0 | Determines if PPP is configured on this port. |
| 1.3.6.1.4.1.33.22.1.1.1.2 | xPppConfigActive | 0 | 0 | Determines if LCP will actively open or wait passively. |
| 1.3.6.1.4.1.33.22.1.1.1.3 | xPppConfigDefaults | 0 | 0 | Revert to factory default PPP parameters. In response to a get-request or get-next-request, the agent always returns 'ready' for… |
| 1.3.6.1.4.1.33.22.1.1.1.4 | xPppConfigRestartTimer | 0 | 0 | The number of seconds waited before retransmitting during option negotiation. |
| 1.3.6.1.4.1.33.22.1.1.1.5 | xPppConfigConfLimit | 0 | 0 | Maximum number of times a configuration request will be sent to the peer without receiving a response. |
| 1.3.6.1.4.1.33.22.1.1.1.6 | xPppConfigFailLimit | 0 | 0 | Maximum number of times a peer's proposed option will be NAKed before REJECTing the option. |
| 1.3.6.1.4.1.33.22.1.1.1.7 | xPppConfigPacketLogging, xPppConfigBackwardCompatibility | 0 | 0 | Determines the level of packet logging to accounting on this port. |
| 1.3.6.1.4.1.33.22.1.1.1.8 | xPppConfigKATimer, xPppConfigTerminateLimit | 0 | 0 | Determines the number of seconds between transmission of LCP Echo Keepalive packets. |
| 1.3.6.1.4.1.33.22.1.1.1.9 | xPppConfigKATimeout, xPppConfigLoadBalancing | 0 | 0 | Determines the number of seconds to wait to hear LCP Echo Replies to our Echo Request Keepalive packets before giving up and shu… |
| 1.3.6.1.4.1.33.22.1.1.1.10 | xPppConfigMlHeartbeat | 0 | 0 | Controls the heartbeat used in determining when a load balanced packet will not be received on this link. |
| 1.3.6.1.4.1.33.22.1.1.1.11 | xPppConfigSendEchoPackets | 0 | 0 | This object allows the user to control whether or not the circuit will send ppp echo requests. Disabling this object will prevent… |
| 1.3.6.1.4.1.33.22.1.1.1.12 | xPppConfigLcpIdentification | 0 | 0 | This object determines whether or not the LCP Identification option will be sent during ppp negotiation. Setting this to true res… |
| 1.3.6.1.4.1.33.22.1.1.1.13 | xPppConfigMultilinkCompatibility | 0 | 0 | This object determines whether or not ppp will be backward compatible with ITouch proprietary multilink protocol. Auto means ppp… |
| 1.3.6.1.4.1.33.22.1.1.1.14 | xPppConfigMagicNumber | 0 | 0 | This object determines whether or not ppp will perform magic number negotiation with its peer. |
| 1.3.6.1.4.1.33.22.1.1.1.15 | xPppConfigLcpCompression | 0 | 0 | This object determines whether or not ppp will negotiate Address and Control Compression and Protocol ID compression. ITouch unit… |
| 1.3.6.1.4.1.33.22.1.1.1.16 | xPppConfigMRUNegotiation | 0 | 0 | This object determines whether or not ppp will negotiate the Maximum Receive Unit option. |
| 1.3.6.1.4.1.33.22.1.1.1.17 | xPppConfigPartnerNetNegotiation | 0 | 0 | This object determines what happens when the IP address offered to us by the peer differs from xCircPartnerIpAddress, if non-zero… |
| 1.3.6.1.4.1.33.22.1.1.1.18 | xPppConfigIpAddressNegotiation | 0 | 0 | This object determines whether or not ppp will negotiate our IP address to the peer. Setting it to enabled causes it to always n… |