The number of milliseconds that a packet may be
held on the Wan link before it will be discarded.
The value 0 indicates no limit.
Parsed from file x-link.mib.txt
Company: None
Module: XYPLEX-LINK-MIB
The number of milliseconds that a packet may be
held on the Wan link before it will be discarded.
The value 0 indicates no limit.
Parsed from file ITOUCHHUB.mib
Module: ITOUCHHUB
wanMaxForwardDelay OBJECT-TYPE SYNTAX INTEGER ( 0..32000 ) ACCESS read-write STATUS mandatory DESCRIPTION "The number of milliseconds that a packet may be held on the Wan link before it will be discarded. The value 0 indicates no limit." DEFVAL { 1000 } ::= { wanEntry 3 }
Vendor: MRV Communications, In-Reach Product Division
Module: ITOUCH-LINK-MIB
[Automatically extracted from oidview.com]
wanMaxForwardDelay OBJECT-TYPE SYNTAX INTEGER ( 0..32000 ) ACCESS read-write STATUS mandatory DESCRIPTION "The number of milliseconds that a packet may be held on the Wan link before it will be discarded. The value 0 indicates no limit." DEFVAL { 1000 } ::= { wanEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.24.3.1.1.1 | wanProtocol, xWanProtocol | 0 | 0 | Controls the protocol run on the link, changes ifType, typically to 'other'. |
| 1.3.6.1.4.1.33.24.3.1.1.2 | wanCompressionAdminStatus, xWanCompressionAdminStatus | 0 | 0 | Controls whether link compression will be run if the link is running the xyplex protocol. Auto will enable compression for links… |
| 1.3.6.1.4.1.33.24.3.1.1.4 | wanMaxMultiForwardDelay, xWanMaxMultiForwardDelay | 0 | 0 | The number of milliseconds that a multicast packet may be held on the Wan link before it will be discarded. The value 0 indicat… |
| 1.3.6.1.4.1.33.24.3.1.1.5 | wanAdminSpeed, xWanAdminSpeed | 0 | 0 | The speed that the software should use for the wan link. The value 0 indicates that the measured speed should be used. |
| 1.3.6.1.4.1.33.24.3.1.1.6 | wanCompressionOperStatus, xWanCompressionOperStatus | 0 | 0 | If the link is running the Xyplex protocol, indicates whether link compression is running. |
| 1.3.6.1.4.1.33.24.3.1.1.7 | xWanDialProtocol | 0 | 0 | Controls the protocol run on the link, changes ifType, typically to 'other'. |
| 1.3.6.1.4.1.33.24.3.1.1.8 | xWanAnswerCalls | 0 | 0 | Controls whether the wan link will answer calls. |
| 1.3.6.1.4.1.33.24.3.1.1.9 | xWanInCalls | 0 | 0 | The number of calls received on this wan. |
| 1.3.6.1.4.1.33.24.3.1.1.10 | xWanOutCalls | 0 | 0 | The number of calls initiated by this wan. |
| 1.3.6.1.4.1.33.24.3.1.1.11 | xWanRejectedInCalls | 0 | 0 | The number of calls received on this wan that were rejected. |
| 1.3.6.1.4.1.33.24.3.1.1.12 | xWanFailedOutCalls | 0 | 0 | The number of calls initiated by this wan which were not successful. |
| 1.3.6.1.4.1.33.24.3.1.1.13 | xWanSignalPollTimer | 0 | 0 | The number of milliseconds between polling the WAN signals. |
| 1.3.6.1.4.1.33.24.3.1.1.14 | xWanAdmnState | 0 | 0 | Controls whether this iTouch interface is in use. |
| 1.3.6.1.4.1.33.24.3.1.1.15 | xWanEventLogging | 0 | 0 | Controls whether events will be logged for this link. |
| 1.3.6.1.4.1.33.24.3.1.1.16 | xWanDSRTimeout | 0 | 0 | Defines the number of seconds a DIRECT protocol WAN link must fail to detect DSR before the link is considered down. 0 indicates… |
| 1.3.6.1.4.1.33.24.3.1.1.17 | xWanSignalNullClock | 0 | 0 | Defines the speed of the Null Clock on the link. Speed is either 0, 8,333, 66,667, 250,000 or 2,000,000. Any value between 0 and … |