Each row defines information specific to a single
instance of the protocol existing on the system.
Parsed from file it-isis-mib.mib.txt
Company: None
Module: ITOUCH-ISIS-MIB
Each row defines information specific to a single
instance of the protocol existing on the system.
Parsed from file ITOUCHHUB.mib
Module: ITOUCHHUB
xIsisSysEntry OBJECT-TYPE SYNTAX XIsisSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row defines information specific to a single instance of the protocol existing on the system." REFERENCE "ANSI {ISIS.poi cLNSISISBasic-P (1)}" INDEX { xIsisSysInstance } ::= { xIsisSysTable 1 }
Vendor: MRV Communications, In-Reach Product Division
Module: ITOUCH-ISIS-MIB
[Automatically extracted from oidview.com]
xIsisSysEntry OBJECT-TYPE SYNTAX XIsisSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row defines information specific to a single instance of the protocol existing on the system." REFERENCE "ANSI {ISIS.poi cLNSISISBasic-P (1)}" INDEX { xIsisSysInstance } ::= { xIsisSysTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.33.26.1.1.1.1 | xIsisSysInstance | 0 | 0 | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
1.3.6.1.4.1.33.26.1.1.1.2 | xIsisSysExistState | 0 | 0 | The validity of this instance of the Integrated IS-IS protocol. This object follows the existenceState behaviour. |
1.3.6.1.4.1.33.26.1.1.1.3 | xIsisSysVersion | 0 | 0 | The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the r… |
1.3.6.1.4.1.33.26.1.1.1.4 | xIsisSysType | 0 | 0 | The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour. |
1.3.6.1.4.1.33.26.1.1.1.5 | xIsisSysNET | 0 | 0 | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to for… |
1.3.6.1.4.1.33.26.1.1.1.6 | xIsisSysMaxPathSplits | 0 | 0 | Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOn… |
1.3.6.1.4.1.33.26.1.1.1.7 | xIsisSysMinLSPTransInt | 0 | 0 | Minimum interval, in seconds, between re-transmission of an LSP. This object follows the resettingTimer behaviour. |
1.3.6.1.4.1.33.26.1.1.1.8 | xIsisSysMaxLSPGenInt | 0 | 0 | Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour. |
1.3.6.1.4.1.33.26.1.1.1.9 | xIsisSysMinBroadLSPTransInt | 0 | 0 | Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer be… |
1.3.6.1.4.1.33.26.1.1.1.10 | xIsisSysCompSNPInt | 0 | 0 | Interval, in seconds, between generation of Complete Sequence Numbers PDUs by a designated Intermediate System on a broadcast cir… |
1.3.6.1.4.1.33.26.1.1.1.11 | xIsisSysOrigL1LSPBuffSize | 0 | 0 | The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour. |
1.3.6.1.4.1.33.26.1.1.1.12 | xIsisSysMaxAreaAddr | 0 | 0 | The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Syste… |
1.3.6.1.4.1.33.26.1.1.1.13 | xIsisSysMinLSPGenInt | 0 | 0 | Minimum interval, in seconds, between successive generation of LSPs with the same LSPID by this instance. This object follows the… |
1.3.6.1.4.1.33.26.1.1.1.14 | xIsisSysPollESHelloRate | 0 | 0 | The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. |
1.3.6.1.4.1.33.26.1.1.1.15 | xIsisSysPartSNPInt | 0 | 0 | Minimum interval between sending Partial Sequence Number PDUs. This object follows the resettingTimer behaviour. |
1.3.6.1.4.1.33.26.1.1.1.16 | xIsisSysWaitTime | 0 | 0 | Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour. |
1.3.6.1.4.1.33.26.1.1.1.17 | xIsisSysDRISISHelloTimer | 0 | 0 | The interval, in seconds, between the generation of IIH PDUs by the designated IS on a LAN. This object follows the resettingTime… |
1.3.6.1.4.1.33.26.1.1.1.18 | xIsisSysOperState | 0 | 0 | The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current val… |
1.3.6.1.4.1.33.26.1.1.1.19 | xIsisSysL1State | 0 | 0 | The state of the Level 1 database. |
1.3.6.1.4.1.33.26.1.1.1.20 | xIsisSysCorrLSPs | 0 | 0 | Number of corrupted LSPs detected. |
1.3.6.1.4.1.33.26.1.1.1.21 | xIsisSysL1LSPDbaseOloads | 0 | 0 | Number of times the LSP L1 database has become overloaded. |
1.3.6.1.4.1.33.26.1.1.1.22 | xIsisSysManAddrsDropFromArea | 0 | 0 | Number of times a manual address has been dropped from the area. |
1.3.6.1.4.1.33.26.1.1.1.23 | xIsisSysAttmptsToExMaxSeqNum | 0 | 0 | Number of times the IS has attempted to exceed the maximum sequence number. |
1.3.6.1.4.1.33.26.1.1.1.24 | xIsisSysSeqNumSkips | 0 | 0 | Number of times a sequence number skip has occurred. |
1.3.6.1.4.1.33.26.1.1.1.25 | xIsisSysOwnLSPPurges | 0 | 0 | Number of times a zero-aged copy of the system's own LSP is received from some other node. |
1.3.6.1.4.1.33.26.1.1.1.26 | xIsisSysIDFieldLenMismatches | 0 | 0 | Number of times a PDU is received with a different value for ID field length to that of the receiving system. |
1.3.6.1.4.1.33.26.1.1.1.27 | xIsisSysMaxAreaMis | 0 | 0 | Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system. |
1.3.6.1.4.1.33.26.1.1.1.28 | xIsisSysOrigL2LSPBuffSize | 0 | 0 | The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour. |
1.3.6.1.4.1.33.26.1.1.1.29 | xIsisSysL2State | 0 | 0 | The state of the Level 2 database. |
1.3.6.1.4.1.33.26.1.1.1.30 | xIsisSysL2LSPDbaseOloads | 0 | 0 | Number of times the Level 2 LSP database has become overloaded. |
1.3.6.1.4.1.33.26.1.1.1.31 | xIsisSysMaxAreaCheck | 0 | 0 | When on, enables checking of maximum area addresses per IS version of ISO10589. |