xParamClient OBJECT IDENTIFIER ::= { iTouch 7 }
Vendor: MRV Communications, In-Reach Product Division
Module: ITOUCH-PARAM-CLIENT-MIB
[Automatically extracted from oidview.com]
xParamClient OBJECT IDENTIFIER ::= { mrvInReachProductDivision 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.7.1 | paramClientLoaderName | 1 | 1 | The name of the system that most recently provided this system's stored parameters. Corresponds directly to the name value label… |
| 1.3.6.1.4.1.33.7.2 | paramClientLoaderAddressType | 1 | 1 | The type of network address contained in paramClientLoaderAddress. 'unknown' means no address has been defined. 'other' means n… |
| 1.3.6.1.4.1.33.7.3 | paramClientLoaderAddress | 1 | 1 | The network address of the system that most recently provided this system's stored parameters. Corresponds directly to the addres… |
| 1.3.6.1.4.1.33.7.4 | paramClientParameterVersion | 1 | 1 | The version number of the parameters as stored in this system's local memory. Corresponds directly to SERVER PARAMETER VERSION a… |
| 1.3.6.1.4.1.33.7.5 | paramClientUpdateTime | 1 | 1 | This system's local date and time when it last attempted to store parameters with a parameter server. Corresponds directly to th… |
| 1.3.6.1.4.1.33.7.6 | paramClientServerCheck | 1 | 1 | Control over whether or not this system is allowed to check for additional parameter servers. 'enabled' allows checking. Corresp… |
| 1.3.6.1.4.1.33.7.7 | paramClientCheckInterval | 1 | 1 | The number of minutes between checks for additional parameter servers. Corresponds directly to PARAMETER SERVER CHECK TIMER and … |
| 1.3.6.1.4.1.33.7.8 | paramClientCheckNow | 1 | 1 | Control to cause this system to immediately check for additional parameter servers. The agent always returns 'ready' for this va… |
| 1.3.6.1.4.1.33.7.9 | paramClientServerLimit | 1 | 1 | The maximum number of parameter servers this system is allowed to remember at the same time. Corresponds directly to PARAMETER SE… |
| 1.3.6.1.4.1.33.7.10 | paramClientRetransmitInterval | 1 | 1 | The number of minutes between this system's attempts to store new parameters with a server that has not acknowledged previous att… |
| 1.3.6.1.4.1.33.7.11 | paramClientRetransmitLimit | 1 | 1 | The maximum number of attempts by this system to store new parameters with a server that has not acknowledged previous attempts. … |
| 1.3.6.1.4.1.33.7.12 | paramClientState | 1 | 1 | This system's state with regard to update attempts. The value meanings are: other none of the following idle no updat… |
| 1.3.6.1.4.1.33.7.13 | paramClientProtocolErrors | 1 | 1 | The number of invalid parameter service protocol messages received by this system. Corresponds directly to the value labeled 'Ba… |
| 1.3.6.1.4.1.33.7.14 | paramClientServerRejects | 1 | 1 | The number of parameter servers this system rejected due to exceeding paramClientServerLimit. Corresponds directly to the value l… |
| 1.3.6.1.4.1.33.7.15 | paramClientServerNumber | 1 | 1 | The number of parameter servers known to this system, indicating the number of entries in serverTable. Corresponds directly to t… |
| 1.3.6.1.4.1.33.7.16 | paramServerTable | 1 | 9 | A list of parameter server entries. The number of entries is given by the value of paramClientServerNumber. |
| 1.3.6.1.4.1.33.7.17 | paramClientPath, paramClientServerFilePath | 1 | 1 | The directory path to the parameter file on all servers. Corresponds directly to PARAMETER SERVER PATH and the value labeled 'Pa… |
| 1.3.6.1.4.1.33.7.18 | paramClientChassisStorageState | 1 | 1 | The status of the current attempt to update parameters in local chassis storage. Corresponds directly to the value labeled 'Chas… |
| 1.3.6.1.4.1.33.7.19 | xParamClientConformance | 2 | 2 | None |
| 1.3.6.1.4.1.33.7.20 | paramClientTftpBroadcast | 1 | 1 | Control over whether or not this system is allowed to send out a TFTP read broadcast after sending a BOOTP broadcast during the P… |
| 1.3.6.1.4.1.33.7.21 | paramClientWriteNow | 1 | 1 | Control to start saving parameters immediately in response to an execute. Corresponds directly to the WRITE PARAMETERS command. I… |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.33.1 | xSystem, system | 65 | 206 | None |
| 1.3.6.1.4.1.33.2 | characterDep, character | 4 | 40 | None |
| 1.3.6.1.4.1.33.3 | xLat, lat | 28 | 98 | None |
| 1.3.6.1.4.1.33.4 | xInternetDep, xInternet | 5 | 10 | None |
| 1.3.6.1.4.1.33.5 | bridgeDep, bridge | 7 | 209 | None |
| 1.3.6.1.4.1.33.6 | xBootServer, bootServer | 5 | 135 | None |
| 1.3.6.1.4.1.33.8 | agent | 8 | 49 | None |
| 1.3.6.1.4.1.33.9 | hubDeprecated, hub | 3 | 20 | None |
| 1.3.6.1.4.1.33.10 | xInternet | 22 | 890 | None |
| 1.3.6.1.4.1.33.11 | xEthernet, ethernet | 5 | 22 | None |
| 1.3.6.1.4.1.33.12 | xBootClient, bootClient | 1 | 2 | None |
| 1.3.6.1.4.1.33.13 | xCharacter, character | 9 | 458 | None |
| 1.3.6.1.4.1.33.14 | xDecnet, decnet | 3 | 78 | None |
| 1.3.6.1.4.1.33.15 | xIpx, ipx | 9 | 243 | None |
| 1.3.6.1.4.1.33.16 | xChassis | 10 | 169 | None |
| 1.3.6.1.4.1.33.17 | xRepeater | 8 | 205 | None |
| 1.3.6.1.4.1.33.19 | xBridge | 5 | 45 | None |
| 1.3.6.1.4.1.33.20 | xX25 | 4 | 50 | None |
| 1.3.6.1.4.1.33.21 | xApple | 7 | 112 | None |
| 1.3.6.1.4.1.33.22 | xPpp | 13 | 249 | None |
| 1.3.6.1.4.1.33.23 | xFrameRelay | 2 | 16 | None |
| 1.3.6.1.4.1.33.24 | xLink | 16 | 255 | None |
| 1.3.6.1.4.1.33.25 | xConcentrator | 10 | 73 | None |
| 1.3.6.1.4.1.33.26 | xIsis | 7 | 208 | None |
| 1.3.6.1.4.1.33.27 | xLapb | 2 | 24 | None |
| 1.3.6.1.4.1.33.28 | sysLoginAuthenticationFailure, xV25bis | 2 | 15 | None |
| 1.3.6.1.4.1.33.29 | xIsdn | 2 | 152 | None |
| 1.3.6.1.4.1.33.30 | contactClosureChanged, xPim | 2 | 17 | None |
| 1.3.6.1.4.1.33.31 | powerAlarmFuseBankA, xRmon | 6 | 165 | None |
| 1.3.6.1.4.1.33.32 | powerAlarmFuseBankB | 0 | 0 | None |
| 1.3.6.1.4.1.33.33 | powerSupplyAlarmA, xEvent | 9 | 25 | None |
| 1.3.6.1.4.1.33.34 | powerSupplyAlarmB, xNovell | 1 | 19 | None |
| 1.3.6.1.4.1.33.35 | portInputSignalChange, xRadius | 6 | 68 | None |
| 1.3.6.1.4.1.33.36 | portOutputSignalChange | 0 | 0 | None |
| 1.3.6.1.4.1.33.37 | humidityThresholdExceeded | 0 | 0 | None |
| 1.3.6.1.4.1.33.38 | temperatureThresholdExceeded | 0 | 0 | None |
| 1.3.6.1.4.1.33.39 | alarmMasterNotResponding | 0 | 0 | None |
| 1.3.6.1.4.1.33.41 | alarmMasterInputStateChange | 0 | 0 | None |
| 1.3.6.1.4.1.33.42 | asciiToTrapTranslation | 0 | 0 | None |
| 1.3.6.1.4.1.33.43 | powerMasterNotResponding | 0 | 0 | None |
| 1.3.6.1.4.1.33.44 | temperatureNormal, x25FrBridge | 3 | 28 | None |
| 1.3.6.1.4.1.33.45 | humidityNormal | 0 | 0 | None |
| 1.3.6.1.4.1.33.46 | alarmMasterSideAOff | 0 | 0 | None |
| 1.3.6.1.4.1.33.47 | alarmMasterSideBOff | 0 | 0 | None |
| 1.3.6.1.4.1.33.48 | xTrap | 0 | 0 | None |
| 1.3.6.1.4.1.33.49 | xAlarm | 0 | 0 | None |
| 1.3.6.1.4.1.33.50 | icmpPingHostNotReachable | 0 | 0 | None |
| 1.3.6.1.4.1.33.51 | icmpPingHostResponding | 0 | 0 | None |
| ... | ||||