Control to zero counters kept for the port. In
response to a get-request or get-next-request, the
agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'execute' causes all the system's counters to
be zeroed. Corresponds to the ZERO PORT command.
Parsed from file xyplex-ethernet-hub-mib.txt
Company: None
Module: XYPLEX-HUB-MIB
Control to zero counters kept for the port. In
response to a get-request or get-next-request, the
agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'execute' causes all the system's counters to
be zeroed. Corresponds to the ZERO PORT command.
Parsed from file XYPLEX-HUB-MIB.mib
Module: XYPLEX-HUB-MIB
hubPortZero OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control to zero counters kept for the port. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's counters to be zeroed. Corresponds to the ZERO PORT command." ::= { hubPortEntry 13 }
Vendor: MRV Communications, In-Reach Product Division
Module: XYPLEX-HUB-MIB
[Automatically extracted from oidview.com]
hubPortZero OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control to zero counters kept for the port. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's counters to be zeroed. Corresponds to the ZERO PORT command." ::= { hubPortEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.9.3.1.1 | hubPortIndex | 0 | 0 | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as ident… |
| 1.3.6.1.4.1.33.9.3.1.2 | hubPortName | 0 | 0 | An administratively assigned name for a twisted-pair port, typically with some local significance. Corresponds directly to PORT … |
| 1.3.6.1.4.1.33.9.3.1.3 | hubPortAutoPolarity | 0 | 0 | A control for automatic determination of twisted-pair port polarity. 'disabled' locks the port into positive polarity. 'enabled… |
| 1.3.6.1.4.1.33.9.3.1.4 | hubPortSensedPolarity | 0 | 0 | Polarity of a twisted-pair port. Corresponds directly to PORT POLARITY and the value labeled 'Polarity:' in the HUB SUMMARY disp… |
| 1.3.6.1.4.1.33.9.3.1.5 | hubPortPulse | 0 | 0 | A control for periodic, automatic generation of a test pulse on a twisted-pair port. Corresponds directly to PORT TEST PULSE and… |
| 1.3.6.1.4.1.33.9.3.1.6 | hubPortPulseStatus | 0 | 0 | Status of the last attempt to generate and detect a test pulse. Corresponds directly to the value labeled 'STATUS' and 'Test Pul… |
| 1.3.6.1.4.1.33.9.3.1.7 | hubPortMissedPulses | 0 | 0 | Number of times that a generated test pulse was not seen in return. Corresponds directly to the value labeled 'Test Pulse Lost:'… |
| 1.3.6.1.4.1.33.9.3.1.8 | hubPortJabbers | 0 | 0 | Number of times that a received frame was terminated by the jabber timer. Corresponds directly to the value labeled 'Jabbers:' i… |
| 1.3.6.1.4.1.33.9.3.1.9 | hubPortBadPreambles | 0 | 0 | Number of times that two one bits (Start of Frame) did not follow an interpacket gap and alternating one and zero bits. Correspo… |
| 1.3.6.1.4.1.33.9.3.1.10 | hubPortBitRateErrors | 0 | 0 | Number of times that bits were received with improper timing. Corresponds directly to the value labeled 'Out of Spec. Bit Rate:'… |
| 1.3.6.1.4.1.33.9.3.1.11 | hubPortLateCollisions | 0 | 0 | Number of times that a frame collision came after the allowed collision window. Corresponds directly to the value labeled 'Late … |
| 1.3.6.1.4.1.33.9.3.1.12 | hubPortNormalCollisions | 0 | 0 | Number of times that a frame collision came within the allowed collision window. Corresponds directly to the value labeled… |
| 1.3.6.1.4.1.33.9.3.1.14 | hubPortZeroTime | 0 | 0 | The number of hundredths of a second since the most recent zeroing of the counters kept for the port, such as through execution o… |