Value of TestPt2 when last shutdown
occurred.
Parsed from file BDCOM-SYS.mib
Module: BDCOM-SYS
Vendor: Shanghai Baud Data Communication Development Corp.
Module: BDCOM-SYS
[Automatically extracted from oidview.com]
bdenvTestPt2last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt2 when last shutdown occurred." ::= { bdlsystem 97 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.3320.2.1.47 | bdbufferNoMem | 0 | 0 | Count of the number of buffer create failures due to no free memory. |
1.3.6.1.4.1.3320.2.1.48 | bdnetConfigAddr | 0 | 0 | Holds the address of the host that supplied the network-confg file. |
1.3.6.1.4.1.3320.2.1.49 | bdnetConfigName | 0 | 0 | Holds the name of the network configuration file. |
1.3.6.1.4.1.3320.2.1.50 | bdnetConfigSet | 0 | 0 | Cause the loading of a new network-confg file using TFTP. |
1.3.6.1.4.1.3320.2.1.51 | bdhostConfigAddr | 0 | 0 | Contains the address of the host that provided the host-config file. |
1.3.6.1.4.1.3320.2.1.52 | bdhostConfigName | 0 | 0 | Contains the name of the last configured host-confg file. |
1.3.6.1.4.1.3320.2.1.53 | bdhostConfigSet | 0 | 0 | Cause the loading of a new host-confg file using TFTP. |
1.3.6.1.4.1.3320.2.1.54 | bdwriteMem | 0 | 0 | Write configuration into non-volatile memory / erase config memory if 0. |
1.3.6.1.4.1.3320.2.1.55 | bdwriteNet | 0 | 0 | Write configuration to host using TFTP. |
1.3.6.1.4.1.3320.2.1.56 | bdbusyPer | 0 | 0 | CPU busy percentage in the last 5 second period. Not the last 5 realtime seconds but the last 5 second period in the scheduler. |
1.3.6.1.4.1.3320.2.1.57 | bdavgBusy1 | 0 | 0 | 1 minute exponentially-decayed moving average of the CPU busy percentage. |
1.3.6.1.4.1.3320.2.1.58 | bdavgBusy5 | 0 | 0 | 5 minute exponentially-decayed moving average of the CPU busy percentage. |
1.3.6.1.4.1.3320.2.1.59 | bdidleCount | 0 | 0 | BDCom internal variable. not to be used |
1.3.6.1.4.1.3320.2.1.60 | bdidleWired | 0 | 0 | BDCom internal variable. not to be used |
1.3.6.1.4.1.3320.2.1.61 | bdContactInfo | 0 | 0 | BDCom's name and address |
1.3.6.1.4.1.3320.2.1.62 | bdbufferHgSize | 0 | 0 | Contains the size of huge buffers. |
1.3.6.1.4.1.3320.2.1.63 | bdbufferHgTotal | 0 | 0 | Contains the total number of huge buffers. |
1.3.6.1.4.1.3320.2.1.64 | bdbufferHgFree | 0 | 0 | Contains the number of free huge buffers. |
1.3.6.1.4.1.3320.2.1.65 | bdbufferHgMax | 0 | 0 | Contains the maximum number of huge buffers. |
1.3.6.1.4.1.3320.2.1.66 | bdbufferHgHit | 0 | 0 | Contains the number of huge buffer hits. |
1.3.6.1.4.1.3320.2.1.67 | bdbufferHgMiss | 0 | 0 | Contains the number of huge buffer misses. |
1.3.6.1.4.1.3320.2.1.68 | bdbufferHgTrim | 0 | 0 | Contains the number of huge buffer trims. |
1.3.6.1.4.1.3320.2.1.69 | bdbufferHgCreate | 0 | 0 | Contains the number of huge buffer creates. |
1.3.6.1.4.1.3320.2.1.70 | bdnetConfigProto | 0 | 0 | Holds the protocol that supplied the network-confg file. |
1.3.6.1.4.1.3320.2.1.71 | bdhostConfigProto | 0 | 0 | Holds the protocol that supplied the host- confg file. |
1.3.6.1.4.1.3320.2.1.72 | bdsysConfigAddr | 0 | 0 | Holds the address of the host that supplied the system boot image. |
1.3.6.1.4.1.3320.2.1.73 | bdsysConfigName | 0 | 0 | Holds the name of the system boot image. |
1.3.6.1.4.1.3320.2.1.74 | bdsysConfigProto | 0 | 0 | Holds the protocol that supplied the system boot image. |
1.3.6.1.4.1.3320.2.1.75 | bdsysClearARP | 0 | 0 | Perform a clearing of the entire ARP cache and invalidation of route caches. |
1.3.6.1.4.1.3320.2.1.76 | bdsysClearInt | 0 | 0 | Clear interface given IfIndex as value. |
1.3.6.1.4.1.3320.2.1.77 | bdenvPresent | 0 | 0 | Is there an environmental monitor card in this box?, 0 - No, 1-AGS card present, wrong firmware, 2-AGS CARD present, firmware ok,… |
1.3.6.1.4.1.3320.2.1.78 | bdenvTestPt1Descr | 0 | 0 | Description of the test point 1. Typically ambient air or the temperature of air entering the router |
1.3.6.1.4.1.3320.2.1.79 | bdenvTestPt1Measure | 0 | 0 | Current value of test point 1. Typically a temperature in centigrade. |
1.3.6.1.4.1.3320.2.1.80 | bdenvTestPt2Descr | 0 | 0 | Description of the test point 2. Typically airflow or the temperature of air leaving the router |
1.3.6.1.4.1.3320.2.1.81 | bdenvTestPt2Measure | 0 | 0 | Current value of test point 2. Typically a temperature in centigrade. |
1.3.6.1.4.1.3320.2.1.82 | bdenvTestPt3Descr | 0 | 0 | Description of the test point 3. Typically +5 volt |
1.3.6.1.4.1.3320.2.1.83 | bdenvTestPt3Measure | 0 | 0 | Current value of test point 3. Typically the value in millivolts of the +5v supply |
1.3.6.1.4.1.3320.2.1.84 | bdenvTestPt4Descr | 0 | 0 | Description of the test point 4. Typically +12 volt |
1.3.6.1.4.1.3320.2.1.85 | bdenvTestPt4Measure | 0 | 0 | Current value of test point 4. Typically the value in millivolts of the +12v supply |
1.3.6.1.4.1.3320.2.1.86 | bdenvTestPt5Descr | 0 | 0 | Description of the test point 5. Typically -12 volt |
1.3.6.1.4.1.3320.2.1.87 | bdenvTestPt5Measure | 0 | 0 | Current value of test point 5. Typically the value in millivolts of the -12v supply |
1.3.6.1.4.1.3320.2.1.88 | bdenvTestPt6Descr | 0 | 0 | Description of the test point 6. Typically -5 volt |
1.3.6.1.4.1.3320.2.1.89 | bdenvTestPt6Measure | 0 | 0 | Current value of test point 6. Typically the value in millivolts of the -5v supply |
1.3.6.1.4.1.3320.2.1.90 | bdenvTestPt1MarginVal | 0 | 0 | Value at which the router will shutdown. Typically the ambient air temperature that will shut the router down. (e.g. 43) |
1.3.6.1.4.1.3320.2.1.91 | bdenvTestPt2MarginVal | 0 | 0 | Value at which the router will shutdown. Typically the airflow air temperature that will shut the router down. (e.g. 58) |
1.3.6.1.4.1.3320.2.1.92 | bdenvTestPt3MarginPercent | 0 | 0 | +/- Percentage that will shut the router down, (e.g. 10%) typically +5 volt |
1.3.6.1.4.1.3320.2.1.93 | bdenvTestPt4MarginPercent | 0 | 0 | +/- Percentage that will shut the router down, (e.g. 15%) typically +12 volt |
1.3.6.1.4.1.3320.2.1.94 | bdenvTestPt5MarginPercent | 0 | 0 | +/- Percentage that will shut the router down, (e.g. 15%) typically -12 volt |
1.3.6.1.4.1.3320.2.1.95 | bdenvTestPt6MarginPercent | 0 | 0 | +/- Percentage that will shut the router down, (e.g. 10%) typically -5 volt |
1.3.6.1.4.1.3320.2.1.96 | bdenvTestPt1last | 0 | 0 | Value of TestPt1 when last shutdown occurred. |
1.3.6.1.4.1.3320.2.1.98 | bdenvTestPt3last | 0 | 0 | Value of TestPt3 when last shutdown occurred. |
1.3.6.1.4.1.3320.2.1.99 | bdenvTestPt4last | 0 | 0 | Value of TestPt4 when last shutdown occurred. |
1.3.6.1.4.1.3320.2.1.100 | bdenvTestPt5last | 0 | 0 | Value of TestPt5 when last shutdown occurred. |
1.3.6.1.4.1.3320.2.1.101 | bdenvTestPt6last | 0 | 0 | Value of TestPt6 when last shutdown occurred. |
1.3.6.1.4.1.3320.2.1.102 | bdenvTestPt1warn | 0 | 0 | Is this test point at a warning level? |
1.3.6.1.4.1.3320.2.1.103 | bdenvTestPt2warn | 0 | 0 | Is this test point at a warning level? |
1.3.6.1.4.1.3320.2.1.104 | bdenvTestPt3warn | 0 | 0 | Is this test point at a warning level? |
1.3.6.1.4.1.3320.2.1.105 | bdenvTestPt4warn | 0 | 0 | Is this test point at a warning level? |
1.3.6.1.4.1.3320.2.1.106 | bdenvTestPt5warn | 0 | 0 | Is this test point at a warning level? |
1.3.6.1.4.1.3320.2.1.107 | bdenvTestPt6warn | 0 | 0 | Is this test point at a warning level? |
1.3.6.1.4.1.3320.2.1.108 | bdenvFirmVersion | 0 | 0 | Description of Environmental Card firmware |
1.3.6.1.4.1.3320.2.1.109 | bdenvTechnicianID | 0 | 0 | Technician ID |
1.3.6.1.4.1.3320.2.1.110 | bdenvType | 0 | 0 | The type of environmental card |
1.3.6.1.4.1.3320.2.1.111 | bdenvBurnDate | 0 | 0 | The calibration / burn in date |
1.3.6.1.4.1.3320.2.1.112 | bdenvSerialNumber | 0 | 0 | Serial Number of environmental monitor card |
... |