NAME = ;
DESC = ifIndex value of an interface the peer will have to be \
called on. For example, on an ISDN interface, this can be \
the ifIndex value of a D channel or the ifIndex value of a \
B channel, whatever is appropriate for a given peer. \
As an example, for Basic Rate leased lines it will be \
necessary to specify a B channel ifIndex, while for \
semi-permanent connections the D channel ifIndex has \
to be specified. \
If the interface can be dynamically assigned, this object \
has a value of zero. (Configuration);
HELP = The LowerIf is the ifIndex value of a D channel index \
(primary or backup port for a semi-permanent connection), \
or the ifIndex value of a B channel for a leased line.;
CAPABILITIES = ;
Parsed from file micom-isdn.mib.txt
Company: None
Module: MICOM-ISDN-MIB
NAME = ;
DESC = ifIndex value of an interface the peer will have to be \
called on. For example, on an ISDN interface, this can be \
the ifIndex value of a D channel or the ifIndex value of a \
B channel, whatever is appropriate for a given peer. \
As an example, for Basic Rate leased lines it will be \
necessary to specify a B channel ifIndex, while for \
semi-permanent connections the D channel ifIndex has \
to be specified. \
If the interface can be dynamically assigned, this object \
has a value of zero. (Configuration);
HELP = The LowerIf is the ifIndex value of a D channel index \
(primary or backup port for a semi-permanent connection), \
or the ifIndex value of a B channel for a leased line.;
CAPABILITIES = ;
Parsed from file MICOM-ISDN-MIB.mib
Module: MICOM-ISDN-MIB
Vendor: MICOM Communication Corporation
Module: MICOM-ISDN-MIB
[Automatically extracted from oidview.com]
nvmDialCtlPeerCfgLowerIf OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "NAME = ; DESC = ifIndex value of an interface the peer will have to be \ called on. For example, on an ISDN interface, this can be \ the ifIndex value of a D channel or the ifIndex value of a \ B channel, whatever is appropriate for a given peer. \ As an example, for Basic Rate leased lines it will be \ necessary to specify a B channel ifIndex, while for \ semi-permanent connections the D channel ifIndex has \ to be specified. \ If the interface can be dynamically assigned, this object \ has a value of zero. (Configuration); HELP = The LowerIf is the ifIndex value of a D channel index \ (primary or backup port for a semi-permanent connection), \ or the ifIndex value of a B channel for a leased line.; CAPABILITIES = ;" DEFVAL { 0 } ::= { nvmDialCtlPeerCfgEntry 3 }
nvmDialCtlPeerCfgLowerIf OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "NAME = ; DESC = ifIndex value of an interface the peer will have to be \ called on. For example, on an ISDN interface, this can be \ the ifIndex value of a D channel or the ifIndex value of a \ B channel, whatever is appropriate for a given peer. \ As an example, for Basic Rate leased lines it will be \ necessary to specify a B channel ifIndex, while for \ semi-permanent connections the D channel ifIndex has \ to be specified. \ If the interface can be dynamically assigned, this object \ has a value of zero. (Configuration); HELP = The LowerIf is the ifIndex value of a D channel index \ (primary or backup port for a semi-permanent connection), \ or the ifIndex value of a B channel for a leased line.; CAPABILITIES = ;" DEFVAL { 0 } ::= { nvmDialCtlPeerCfgEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.335.1.4.24.1.9.1.1 | nvmDialCtlPeerCfgId | 0 | 0 | NAME = ; DESC = This object identifies a single peer. There may \ be several entries in this table for one peer, \ defining differ… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.2 | nvmDialCtlPeerCfgBchannel | 0 | 0 | NAME = ; DESC = The value of this object specifies the B channel to be used \ for leased lines. (Configuration); HELP = Note: 0 = … |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.4 | nvmDialCtlPeerCfgOriginateAddress | 0 | 0 | NAME = ; DESC = Call Address at which the peer will be called. \ Think of this as the set of characters following 'ATDT ' \ or the… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.5 | nvmDialCtlPeerCfgSubAddress | 0 | 0 | NAME = ; DESC = Subaddress at which the peer will be called. \ If the subaddress is undefined for the given media or \ unused, thi… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.6 | nvmDialCtlPeerCfgClosedUserGroup | 0 | 0 | NAME = ; DESC = Closed User Group at which the peer will be called. \ If the Closed User Group is undefined for the given media \… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.7 | nvmDialCtlPeerCfgSpeed | 0 | 0 | NAME = ; DESC = The desired information transfer speed in bits/second \ when calling this peer. \ The detailed media specific info… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.8 | nvmDialCtlPeerCfgInfoType | 0 | 0 | NAME = ; DESC = The Information Transfer Capability to be used when \ calling this peer. \ speech(2) refers to a non-data connecti… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.9 | nvmDialCtlPeerCfgPermission | 0 | 0 | NAME = ; DESC = Applicable permissions. callback(4) either rejects the \ call and then calls back, or uses the 'Reverse charging'… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.10 | nvmDialCtlPeerCfgCallRetries | 0 | 0 | NAME = ; DESC = The number of calls to a non-responding address \ that may be made. A retry count of zero means \ there is no boun… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.11 | nvmDialCtlPeerCfgRetryDelay | 0 | 0 | NAME = ; DESC = The time in seconds between call retries if a peer \ cannot be reached. \ A value of zero means that call retries … |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.12 | nvmDialCtlPeerCfgFailureDelay | 0 | 0 | NAME = ; DESC = The time in seconds after which call attempts are \ to be placed again after a peer has been noticed \ to be unrea… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.13 | nvmDialCtlPeerCfgTrapEnable | 0 | 0 | NAME = ; DESC = This object indicates whether dialCtlPeerCallInformation \ and dialCtlPeerCallSetup traps should be generated for… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.14 | nvmDialCtlPeerCfgStatus | 0 | 0 | NAME = ; DESC = For software releases prior to 3.0 \ this object only supported enumerations of \ add and delete with an access of… |