Deprecated! Refer to sysCmTrafficGroupStatus, sysCmFailoverStatus, and
sysCmFailoverStatusDetails.
This data indicates whether the machine is active or standby.
The value for this data could be 0, 1, 2, or 3.
The values of 1 and 2 are only defined for an active-active installation.
If two boxes are both active, value for unit 1 will be 1 and value for unit 2 will be 2.
Otherwise, for active unit, this value is 3; for stand-by unit, this value is 0.
Parsed from file F5-BIGIP-SYSTEM-MIB.txt
Company: None
Module: F5-BIGIP-SYSTEM-MIB
This data indicates whether the machine is active or standby.
The value for this data could be 0, 1, 2, or 3.
The values of 1 and 2 are only defined for an active-active installation.
If two boxes are both active, value for unit 1 will be 1 and value for unit 2 will be 2.
Otherwise, for active unit, this value is 3; for stand-by unit, this value is 0.
Parsed from file F5-BIGIP-SYSTEM-MIB.mib
Module: F5-BIGIP-SYSTEM-MIB
Vendor: F5 Labs, Inc.
Module: F5-BIGIP-SYSTEM-MIB
[Automatically extracted from oidview.com]
sysAttrFailoverUnitMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Deprecated! Refer to sysCmTrafficGroupStatus, sysCmFailoverStatus, and sysCmFailoverStatusDetails. This data indicates whether the machine is active or standby. The value for this data could be 0, 1, 2, or 3. The values of 1 and 2 are only defined for an active-active installation. If two boxes are both active, value for unit 1 will be 1 and value for unit 2 will be 2. Otherwise, for active unit, this value is 3; for stand-by unit, this value is 0." ::= { sysGlobalAttr 19 }
sysAttrFailoverUnitMask OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This data indicates whether the machine is active or standby. The value for this data could be 0, 1, 2, or 3. The values of 1 and 2 are only defined for an active-active installation. If two boxes are both active, value for unit 1 will be 1 and value for unit 2 will be 2. Otherwise, for active unit, this value is 3; for stand-by unit, this value is 0." ::= { sysGlobalAttr 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3375.2.1.1.1.1.19.0 | sysAttrFailoverUnitMask | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3375.2.1.1.1.1.1 | sysAttrArpMaxEntries | 1 | 1 | The maximum number of dynamic entries which can be exist at one time. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.2 | sysAttrArpAddReciprocal | 1 | 1 | When enabled add the IP/MAC address of an ARP requester into the ARP table. Enabling this field can allow a malicious user on the… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.3 | sysAttrArpTimeout | 1 | 1 | Determine how long (in seconds) ARP entries are kept in the cache before being marked stale. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.4 | sysAttrArpRetries | 1 | 1 | The maximum number of times to request an ARP before giving up and marking the IP address as unavailable. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.5 | sysAttrBootQuiet | 1 | 1 | The behavior of boot message display during a reboot of the system. Enabling this suppresses the messages. Disabling this display… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.6 | sysAttrConfigsyncState | 1 | 1 | Enumerated state between peer systems. -1 - uninitialized or disabled config state 0 - Synchronized 1 - Local config modified, rec… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.7 | sysAttrConnAdaptiveReaperHiwat | 1 | 1 | The high threshold for dynamic reaper, at which point no new connection will be allowed. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.8 | sysAttrConnAdaptiveReaperLowat | 1 | 1 | The low threshold for dynamic reaper, at which point the reaper will kick in. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.9 | sysAttrConnAutoLasthop | 1 | 1 | The behavior of automatic last hop pools. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.10 | sysAttrFailoverActiveMode | 1 | 1 | The redundant pair mode. Enabling is to use active-active mode. By default this is disable, active-standby mode is used. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.11 | sysAttrFailoverForceActive | 1 | 1 | The behavior of failover. Enabling makes failover daemon always attempt to become the active unit. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.12 | sysAttrFailoverForceStandby | 1 | 1 | The behavior of failover. Enabling makes failover daemon go to standby whenever is senses its peer alive. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.13 | sysAttrFailoverIsRedundant | 1 | 1 | The redundant mode of the system. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.14 | sysAttrFailoverMemoryRestartPercent | 1 | 1 | Deprecated! Refer sysAttrConnAdaptiveReaperHiwat and sysAttrConnAdaptiveReaperLowat for memory threshold when TMM (Traffic Manag… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.15 | sysAttrFailoverNetwork | 1 | 1 | The behavior of using the network as a backup to, or instead of, the serial line for failover if this value is 1. By default th… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.16 | sysAttrFailoverStandbyLinkDownTime | 1 | 1 | How long the external link is held down when the unit fails over and becomes standby. This is so an external switch will update i… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.17 | sysAttrFailoverSslhardware | 1 | 1 | Deprecated! This feature has been eliminated. Enables/disables the action prescribed by sysAttrFailoverSslhardwareAction (failove… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.18 | sysAttrFailoverSslhardwareAction | 1 | 1 | Deprecated! This feature has been eliminated. This is controlled by the sysAttrFailoverSslhardware. If sysAttrFailoverSslhardware… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.20 | sysAttrFailoverUnitId | 1 | 1 | The controller unique unit id, 1 or 2, in the event that network communication is not possible with its peer. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.21 | sysAttrModeMaint | 1 | 1 | The state of system maintenance mode. disable - not in maintenance mode; enable - maintenance mode. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.22 | sysAttrPacketFilter | 1 | 1 | This option globally enables or disables processing of all packet filter options, including the rule list. The packet filter is e… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.23 | sysAttrPacketFilterAllowImportantIcmp | 1 | 1 | This option causes the packet filter to automatically accept a number of important ICMP types without requiring the addition of a… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.24 | sysAttrPacketFilterEstablished | 1 | 1 | The status of filter established feature. This option controls whether or not filter rules are applied to packets which are part … |
| 1.3.6.1.4.1.3375.2.1.1.1.1.25 | sysAttrPacketFilterDefaultAction | 1 | 1 | The filter default action. This variable controls how to handle packets which did not match any rules. It can be either accept, d… |
| 1.3.6.1.4.1.3375.2.1.1.1.1.26 | sysAttrPacketFilterSendIcmpErrors | 1 | 1 | The feature to control the kind of errors to send for REJECT rules. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.27 | sysAttrPvaAcceleration | 1 | 1 | The type of hardware acceleration desired. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.28 | sysAttrVlanFDBTimeout | 1 | 1 | Controls how long before an entry expires in the L2 forwarding database. |
| 1.3.6.1.4.1.3375.2.1.1.1.1.29 | sysAttrWatchdogState | 1 | 1 | The state of watch dog feature - a hardware device that monitors the system for hardware failure. |