Idle timeout override when waiting for the server to close.
This occurs if the server flow is not suitable for reuse or
after a FIN is received on an unspliced server connection.
0 is immediate, -1 is indefinite.
Parsed from file F5-BIGIP-LOCAL-MIB.txt
Company: None
Module: F5-BIGIP-LOCAL-MIB
Idle timeout override when waiting for the server to close.
This occurs if the server flow is not suitable for reuse or
after a FIN is received on an unspliced server connection.
0 is immediate, -1 is indefinite.
Parsed from file F5-BIGIP-LOCAL-MIB.mib
Module: F5-BIGIP-LOCAL-MIB
Vendor: F5 Labs, Inc.
Module: F5-BIGIP-LOCAL-MIB
[Automatically extracted from oidview.com]
ltmFastHttpProfileServerCloseTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Idle timeout override when waiting for the server to close. This occurs if the server flow is not suitable for reuse or after a FIN is received on an unspliced server connection. 0 is immediate, -1 is indefinite." ::= { ltmFastHttpProfileEntry 8 }
ltmFastHttpProfileServerCloseTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Idle timeout override when waiting for the server to close. This occurs if the server flow is not suitable for reuse or after a FIN is received on an unspliced server connection. 0 is immediate, -1 is indefinite." ::= { ltmFastHttpProfileEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.1 | ltmFastHttpProfileName | 0 | 0 | The name of a fast HTTP profile. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.2 | ltmFastHttpProfileConfigSource | 0 | 0 | The state that specifies whether this is a base/pre-configured profile or user defined profile. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.3 | ltmFastHttpProfileDefaultName | 0 | 0 | The name of the profile from which the specified profile derives its attribute default values. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.4 | ltmFastHttpProfileResetOnTimeout | 0 | 0 | If true and a TCP connection exceeds its idle_timeout, send a reset in addition to deleting the connection. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.5 | ltmFastHttpProfileIdleTimeout | 0 | 0 | Number of seconds without traffic before a connection is eligible for deletion. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.6 | ltmFastHttpProfileMssOverride | 0 | 0 | If non-zero and less than the 1460 default, this value overrides the maximum segment size for server-side flows. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.7 | ltmFastHttpProfileClientCloseTimeout | 0 | 0 | Idle timeout override when waiting for the client to close. This occurs after a client FIN is received or after a FIN is sent. 0 … |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.9 | ltmFastHttpProfileConnpoolMaxSize | 0 | 0 | Maximum number of connections to any given LB pool. 0 for unlimited. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.10 | ltmFastHttpProfileConnpoolMinSize | 0 | 0 | Minimum number of connections to any given LB pool. 0 is an acceptable value. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.11 | ltmFastHttpProfileConnpoolStep | 0 | 0 | Connection ramp-up increment. Must be greater than 0. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.12 | ltmFastHttpProfileConnpoolMaxReuse | 0 | 0 | Maximum number of times a server-side flow will be reused. 0 for unlimited. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.13 | ltmFastHttpProfileConnpoolIdleTimeout | 0 | 0 | Idle timeout override for unspliced server-side flows in the reuse pool. 0 is disabled, i.e. use the default idle timeout. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.14 | ltmFastHttpProfileMaxHeaderSize | 0 | 0 | Maximum amount of data that will be buffered in order to make a content-switching decision. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.15 | ltmFastHttpProfileMaxRequests | 0 | 0 | Maximum number of requests on a client-side flow before the flow is shutdown. 0 for unlimited. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.16 | ltmFastHttpProfileInsertXforwardedFor | 0 | 0 | The state whether to insert or replace X-Forwarded-For header with client IP. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.17 | ltmFastHttpProfileHttp11CloseWorkarounds | 0 | 0 | The state to workaround problems with certain brands of benchmarking software that cannot handle FIN-PUSH on HTTP/1.1 responses. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.18 | ltmFastHttpProfileHeaderInsert | 0 | 0 | Insert the given string as a header. If the header already exists, it is not replaced. Unlike HTTP, this string does not support … |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.19 | ltmFastHttpProfileUncleanShutdown | 0 | 0 | The mode to indicate whether to do unclean shutdown for client connections. |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.20 | ltmFastHttpProfileForceHttp10Response | 0 | 0 | The state to indicate whether to rewrite server's HTTP version to 1.0 in status line in order to dissuade the client from pipeli… |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.21 | ltmFastHttpProfileLayer7 | 0 | 0 | The state that if false, we don't parse HTTP requests. This is useful for providing SYN-proxy protection for L4 connections thro… |
| 1.3.6.1.4.1.3375.2.2.6.12.1.2.1.22 | ltmFastHttpProfileConnpoolReplenish | 0 | 0 | The state that specifies whether the connpool should be replenished to its prior number of connections when a connection is clos… |