Resolution to which a watchdog update interval can be
set. For example, a watchdog timer resolution of
R microsecond and an watchdog timer increment of
I microseconds would indicate that a watchdog update
interval setting of N will produce a (N*I)-R to (N*I)
microseconds delay. In LSC Local Console,
this value is shown in Seconds.
Parsed from file INTELCORPORATIONBASEBOARD-MIB.mib
Module: INTELCORPORATIONBASEBOARD-MIB
Vendor: Intel Corporation
Module: INTELCORPORATIONBASEBOARD-MIB
[Automatically extracted from oidview.com]
a1004WatchdogTimerResolution OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Resolution to which a watchdog update interval can be set. For example, a watchdog timer resolution of R microsecond and an watchdog timer increment of I microseconds would indicate that a watchdog update interval setting of N will produce a (N*I)-R to (N*I) microseconds delay. In LSC Local Console, this value is shown in Seconds. " ::= {eSystemControl 10}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.1 | a1004Selfid | 0 | 0 | A unique number that identifies this row. |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.2 | a1004ResetSystem | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string initiates an immediate system hard reset. Reading t… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.3 | a1004TimedResetIncrement | 0 | 0 | This attribute contains the increments in which a timed reset can be set, in microseconds. |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.4 | a1004TimedResetResolution | 0 | 0 | This attribute contains the resolution to which a Timed Reset can be set, in microseconds. For example, a resolution of 1 second… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.5 | a1004TimeUntilSystemReset | 0 | 0 | This attribute contains the interval for timed resets, in units of the Timed Reset Increment attribute. Writing a non-zero value,… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.6 | a1004SystemPowerCapabilities | 0 | 0 | This attribute describes the system power control capabilities. It can have one of the following values: Unknown, On And Off, Of… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.7 | a1004SystemPowerStatus | 0 | 0 | This attribute provides access to the status of system power. Its value is either On or Off. |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.8 | a1004EventLoggingCapability | 0 | 0 | This attribute describes the Event Logging Capabilities. The attribute value can be : Unknown, Unsupported, Active, or Inactive. I… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.9 | a1004WatchdogTimerIncrement | 0 | 0 | This attribute contains the increments in which a watchdog update interval can be set. This value is maintained internally by ins… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.11 | a1004WatchdogUpdateInterval | 0 | 0 | This attribute specifies the Interval for watchdog resets, in minutes. If the system software does not update the watchdog timer… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.12 | a1004UseSystemWatchdogFeature | 0 | 0 | If this value is On, then the Watchdog feature is enabled and the Watchdog Update Interval value is valid. If enabled this featur… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.13 | a1004ResetSystemAfterDelay | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate a timed reset, the reset will occur w… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.15 | a1004SavePersistentData | 0 | 0 | When this attribute value is set to ON all the persistent data like thresholds are stored into the persistent data Table. |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.16 | a1004RestoreFactoryDefaults | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will cause all the Factory default thresholds to be… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.17 | a1004ShutdownOs | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate OS shutdown Reading this… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.18 | a1004ShutdownOsAndPowerOff | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate OS shutdown and power of… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.19 | a1004ShutdownOsAndHardwareReset | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate OS shutdown and hardware… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.20 | a1004IssueAHardwareNmi | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate hardware NMI. Reading th… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.21 | a1004ImmediatePowerDown | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string initiates an immediate power off the system. Readin… |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.22 | a1004Challenge | 0 | 0 | Reading this value will return a challenge string that may be hashed with the firmware (DPC) password and then written to any of … |
1.3.6.1.4.1.343.2.10.3.4.1.1004.1.23 | a1004VerifyPrivilege | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will result in a successful write operation. Readin… |