If this value is On, then the Watchdog feature is
enabled and the Watchdog Update Interval value is valid.
If enabled this feature automatically resets the server
if the LSC software does not reset the watchdog
timer within the specified Watchdog Update Interval.
NOTE : This is a hard reset that will immediately reset
the system without taking NetWare down. This might
result in some files being corrupted.
Parsed from file INTELCORPORATIONBASEBOARDMAPPER-MIB.mib
Module: INTELCORPORATIONBASEBOARDMAPPER-MIB
Vendor: Intel Corporation
Module: INTELCORPORATIONBASEBOARDMAPPER-MIB
[Automatically extracted from oidview.com]
a1004UseSystemWatchdogFeature OBJECT-TYPE SYNTAX INTEGER { vOff (0), vOn (1), vUnsupported (2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this value is On, then the Watchdog feature is enabled and the Watchdog Update Interval value is valid. If enabled this feature automatically resets the server if the LSC software does not reset the watchdog timer within the specified Watchdog Update Interval. NOTE : This is a hard reset that will immediately reset the system without taking NetWare down. This might result in some files being corrupted. " ::= {eSystemControl 12}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.2.10.7.2.1.1 | a1004Selfid | 0 | 0 | A unique number that identifies this row. |
| 1.3.6.1.4.1.343.2.10.7.2.1.2 | a1004ResetSystem | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string initiates an immediate system hard reset. Reading t… |
| 1.3.6.1.4.1.343.2.10.7.2.1.3 | a1004TimedResetIncrement | 0 | 0 | This attribute contains the increments in which a timed reset can be set, in microseconds. |
| 1.3.6.1.4.1.343.2.10.7.2.1.4 | a1004TimedResetResolution | 0 | 0 | This attribute contains the resolution to which a Timed Reset can be set, in microseconds. For example, a resolution of 1 second… |
| 1.3.6.1.4.1.343.2.10.7.2.1.5 | a1004TimeUntilSystemReset | 0 | 0 | This attribute contains the interval for timed resets, in units of the Timed Reset Increment attribute. Writing a non-zero value,… |
| 1.3.6.1.4.1.343.2.10.7.2.1.6 | a1004SystemPowerCapabilities | 0 | 0 | This attribute describes the system power control capabilities. It can have one of the following values: Unknown, On And Off, Of… |
| 1.3.6.1.4.1.343.2.10.7.2.1.7 | a1004SystemPowerStatus | 0 | 0 | This attribute provides access to the status of system power. Its value is either On or Off. |
| 1.3.6.1.4.1.343.2.10.7.2.1.8 | a1004EventLoggingCapability | 0 | 0 | This attribute describes the Event Logging Capabilities. The attribute value can be : Unknown, Unsupported, Active, or Inactive. I… |
| 1.3.6.1.4.1.343.2.10.7.2.1.9 | a1004WatchdogTimerIncrement | 0 | 0 | This attribute contains the increments in which a watchdog update interval can be set. This value is maintained internally by ins… |
| 1.3.6.1.4.1.343.2.10.7.2.1.10 | a1004WatchdogTimerResolution | 0 | 0 | Resolution to which a watchdog update interval can be set. For example, a watchdog timer resolution of R microsecond and an watc… |
| 1.3.6.1.4.1.343.2.10.7.2.1.11 | a1004WatchdogUpdateInterval | 0 | 0 | This attribute specifies the Interval for watchdog resets, in minutes. If the system software does not update the watchdog timer… |
| 1.3.6.1.4.1.343.2.10.7.2.1.13 | a1004ResetSystemAfterDelay | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate a timed reset, the reset will occur w… |
| 1.3.6.1.4.1.343.2.10.7.2.1.15 | a1004SavePersistentData | 0 | 0 | When this attribute value is set to ON all the persistent data like thresholds are stored into the persistent data Table. |
| 1.3.6.1.4.1.343.2.10.7.2.1.16 | a1004RestoreFactoryDefaults | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will cause all the Factory default thresholds to be… |
| 1.3.6.1.4.1.343.2.10.7.2.1.17 | a1004ShutdownOs | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate OS shutdown Reading this… |
| 1.3.6.1.4.1.343.2.10.7.2.1.18 | a1004ShutdownOsAndPowerOff | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate OS shutdown and power of… |
| 1.3.6.1.4.1.343.2.10.7.2.1.19 | a1004ShutdownOsAndHardwareReset | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate OS shutdown and hardware… |
| 1.3.6.1.4.1.343.2.10.7.2.1.20 | a1004IssueAHardwareNmi | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate hardware NMI. Reading th… |
| 1.3.6.1.4.1.343.2.10.7.2.1.21 | a1004ImmediatePowerDown | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string initiates an immediate power off the system. Readin… |
| 1.3.6.1.4.1.343.2.10.7.2.1.22 | a1004Challenge | 0 | 0 | Reading this value will return a challenge string that may be hashed with the firmware (DPC) password and then written to any of … |
| 1.3.6.1.4.1.343.2.10.7.2.1.23 | a1004VerifyPrivilege | 0 | 0 | Writing to this attribute with a properly authenticated challenge hash string will result in a successful write operation. Readin… |