This field triggers loading and saving of the
system settings in non-volatile RAM space. To
trigger a load or a save the NVRAM IP address
must first be set below. This field is always
read as one. The filename used will be the
hexadecimal value of this systems IP address.
Parsed from file Intel6kS.mib.txt
Company: None
Module: Intel-6000-Switch-MIB
This field triggers loading and saving of the
system settings in non-volatile RAM space. To
trigger a load or a save the NVRAM IP address
must first be set below. This field is always
read as one. The filename used will be the
hexadecimal value of this systems IP address.
Parsed from file Intel-6000-Switch-MIB.mib
Module: Intel-6000-Switch-MIB
Vendor: Intel Corporation
Module: Intel-6000-Switch-MIB
[Automatically extracted from oidview.com]
nvramLoadSave OBJECT-TYPE SYNTAX INTEGER { load(1), save(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field triggers loading and saving of the system settings in non-volatile RAM space. To trigger a load or a save the NVRAM IP address must first be set below. This field is always read as one. The filename used will be the hexadecimal value of this systems IP address." ::= { switchConfigGroup 14 }
nvramLoadSave OBJECT-TYPE SYNTAX INTEGER { load(1), save(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field triggers loading and saving of the system settings in non-volatile RAM space. To trigger a load or a save the NVRAM IP address must first be set below. This field is always read as one. The filename used will be the hexadecimal value of this systems IP address." ::= { switchConfigGroup 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.2.11.1.2.1.14.0 | nvramLoadSave | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.2.11.1.2.1.1 | ipAddress | 1 | 1 | IP address for the management port of this entity. |
| 1.3.6.1.4.1.343.2.11.1.2.1.2 | netMask | 1 | 1 | The netmask for the management port of this entity. |
| 1.3.6.1.4.1.343.2.11.1.2.1.3 | defaultGateway | 1 | 1 | The IP address of the Default Gateway for this entity. |
| 1.3.6.1.4.1.343.2.11.1.2.1.4 | broadcastAddress | 1 | 1 | The broadcast address for the management port of this entity. |
| 1.3.6.1.4.1.343.2.11.1.2.1.5 | maxMacAddresses | 1 | 1 | Largest aggregate number of MAC addresses which this entity can support simultaneously. |
| 1.3.6.1.4.1.343.2.11.1.2.1.6 | clearStatistics | 1 | 1 | Setting this variable to TRUE (1) clears the traffic statistics accumulators on this entity. Setting this variable to any other v… |
| 1.3.6.1.4.1.343.2.11.1.2.1.7 | ageFilterDatabase | 1 | 1 | Setting this variable to FALSE (0) causes this entity to stop aging out entries from its filter database. Setting this variable t… |
| 1.3.6.1.4.1.343.2.11.1.2.1.8 | entMibVersion | 1 | 1 | The revision level of the MIB contained in the CP firmware. |
| 1.3.6.1.4.1.343.2.11.1.2.1.9 | telnetEnable | 1 | 1 | The current state of the telnet daemon in the Switch. If this field is set to disable, external accesses via telnet will not be … |
| 1.3.6.1.4.1.343.2.11.1.2.1.10 | syslogEnable | 1 | 1 | The current state of remote IP system logging. If enabled, the Switch will log messages to the SyslogIp IP address. If it is dis… |
| 1.3.6.1.4.1.343.2.11.1.2.1.11 | syslogIp | 1 | 1 | The Ip address for remote IP system logging. If syslogEnabled is enabled, the Switch log messages to this IP. |
| 1.3.6.1.4.1.343.2.11.1.2.1.12 | syslogCmds | 1 | 1 | If system logging is enabled, this field enables or disables the logging of commands issued on a terminal command line. |
| 1.3.6.1.4.1.343.2.11.1.2.1.13 | syslogOut | 1 | 1 | If system logging is enabled, this field enables or disables the logging of output from the terminal. |
| 1.3.6.1.4.1.343.2.11.1.2.1.15 | nvramLastOpStat | 1 | 1 | This field shows the outcome of the last NVRAM load or save. If the NVRAM update was sucessful, this field will return one. |
| 1.3.6.1.4.1.343.2.11.1.2.1.16 | nvramRemoteIp | 1 | 1 | This is the IP address of the remote tftp machine where the NVRAM is to be loaded or saved. For nvramLoadSave to have an effect,… |
| 1.3.6.1.4.1.343.2.11.1.2.1.17 | nvramRemotePath | 1 | 1 | This is the path on the remote machine where the NVRAM image is to be retrieved or stored. This path does not include the filena… |