The total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).
This object can be used as a reasonable estimate of
10-Megabit ethernet utilization. If greater precision is
desired, the switchEtherStatsPkts and switchEtherStatsOctets objects
should be sampled before and after a common interval. The
differences in the sampled values are Pkts and Octets,
respectively, and the number of seconds in the interval is
Interval. These values are used to calculate the Utilization
as follows:
Pkts * (9.6 + 6.4) + (Octets * .8)
Utilization =
Interval * 10,000
The result of this equation is the value Utilization which
is the percent utilization of the ethernet segment on a
scale of 0 to 100 percent.
Parsed from file INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB.mib
Module: INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB
Vendor: Intel Corporation
Module: INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB
[Automatically extracted from oidview.com]
switchEtherStatsOctets OBJECT-TYPE SYNTAX Counter32 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the switchEtherStatsPkts and switchEtherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent." ::= { switchEtherStatsEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.1 | switchEtherStatsIndex | 0 | 0 | The value of this object uniquely identifies this switchEtherStats entry. |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.2 | switchEtherStatsDataSource | 0 | 0 | This object identifies the source of the data that this switchEtherStats entry is configured to analyze. This source can be any … |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.3 | switchEtherStatsDropEvents | 0 | 0 | The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not nece… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.5 | switchEtherStatsPkts | 0 | 0 | The total number of packets (including bad packets, broadcast packets, and multicast packets) received. |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.6 | switchEtherStatsBroadcastPkts | 0 | 0 | The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.7 | switchEtherStatsMulticastPkts | 0 | 0 | The total number of good packets received that were directed to a multicast address. Note that this number does not include pack… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.8 | switchEtherStatsCRCAlignErrors | 0 | 0 | The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 o… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.9 | switchEtherStatsUndersizePkts | 0 | 0 | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and we… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.10 | switchEtherStatsOversizePkts | 0 | 0 | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and wer… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.11 | switchEtherStatsFragments | 0 | 0 | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) an… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.12 | switchEtherStatsJabbers | 0 | 0 | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and ha… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.13 | switchEtherStatsCollisions | 0 | 0 | The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of t… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.14 | switchEtherStatsPkts64Octets | 0 | 0 | The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including … |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.15 | switchEtherStatsPkts65to127Octets | 0 | 0 | The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding fr… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.16 | switchEtherStatsPkts128to255Octets | 0 | 0 | The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding f… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.17 | switchEtherStatsPkts256to511Octets | 0 | 0 | The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding f… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.18 | switchEtherStatsPkts512to1023Octets | 0 | 0 | The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding … |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.19 | switchEtherStatsPkts1024to1518Octets | 0 | 0 | The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding… |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.20 | switchEtherStatsOwner | 0 | 0 | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.21 | switchEtherStatsStatus | 0 | 0 | The status of this switchEtherStats entry. |