A table entry, containing configuration information
about a single port.
Parsed from file intelhub.mib.txt
Company: None
Module: INTEL-EXPRESS110-MIB
A table entry, containing configuration information
about a single port.
Parsed from file INTEL-EXPRESS110-MIB.mib
Module: INTEL-EXPRESS110-MIB
Vendor: Intel Corporation
Module: INTEL-EXPRESS110-MIB
[Automatically extracted from oidview.com]
portConfigEntry OBJECT-TYPE SYNTAX PortConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table entry, containing configuration information about a single port." INDEX { portChassisIndex, portModuleIndex, portIndex } ::= { portConfigTable 1 }
portConfigEntry OBJECT-TYPE SYNTAX PortConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table entry, containing configuration information about a single port." INDEX { portChassisIndex, portModuleIndex, portIndex } ::= { portConfigTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.2.2.1.10.1.1 | portChassisIndex | 0 | 0 | Chassis number in stack. This object refers to the first number in the example below. Example: portChassisIndex.1.1.9 The first nu… |
| 1.3.6.1.4.1.343.2.2.1.10.1.2 | portModuleIndex | 0 | 0 | Module number in the chassis. This object refers to the second number in the example below. Example: portModuleIndex.1.1.9 The fir… |
| 1.3.6.1.4.1.343.2.2.1.10.1.3 | portIndex | 0 | 0 | Port number in the module. This object refers to the third number in the example below. Example: portChassisIndex 1.1.9 The first … |
| 1.3.6.1.4.1.343.2.2.1.10.1.4 | portType | 0 | 0 | Displays the selected port's capabilities. internalHalfDuplex is the expansion module's internal connection to a port in the hub. |
| 1.3.6.1.4.1.343.2.2.1.10.1.5 | portAdminStatus | 0 | 0 | Enables or disables the selected port. Disabled ports will not be able to establish a link to a device. Disabled ports remain dis… |
| 1.3.6.1.4.1.343.2.2.1.10.1.6 | portOperStatus | 0 | 0 | Displays the current link status of the port. Operational means a port has established a link to a device. Notoperational means t… |
| 1.3.6.1.4.1.343.2.2.1.10.1.7 | portJabber | 0 | 0 | Jabber state of the port. Failure means the device attached to the port caused the hub's jabber lock-up protection to turn on. Ch… |
| 1.3.6.1.4.1.343.2.2.1.10.1.8 | portLinkPartnerInfo | 0 | 0 | Bitfield used by SNMP application. |
| 1.3.6.1.4.1.343.2.2.1.10.1.9 | portLEDInfo | 0 | 0 | Bitfield used by SNMP application. |
| 1.3.6.1.4.1.343.2.2.1.10.1.10 | portTimeSinceLastLinkChange | 0 | 0 | Time since the last link status change. |
| 1.3.6.1.4.1.343.2.2.1.10.1.11 | portAllCountersReset | 0 | 0 | Resets all counters for ports to zero. This includes all traffic statistics (packet count, etc.) and error counts. |
| 1.3.6.1.4.1.343.2.2.1.10.1.12 | portReset | 0 | 0 | Reset the port at the media level. |
| 1.3.6.1.4.1.343.2.2.1.10.1.13 | portLastErrorID | 0 | 0 | Type of last error that occurred on the port since the last link status change. badPhy is a hardware problem with the hub port. p… |
| 1.3.6.1.4.1.343.2.2.1.10.1.14 | portSegmentAdminMode | 0 | 0 | For ports that have the ability to be set independent of the hub or module they reside in, this object allows setting the port to… |
| 1.3.6.1.4.1.343.2.2.1.10.1.15 | portSegmentOperStatus | 0 | 0 | Reports the port's segment assignment. 'none' indicates the port has a portSegmentAdminMode of 'auto' and has not negotiated a li… |
| 1.3.6.1.4.1.343.2.2.1.10.1.16 | portLinkSpeed | 0 | 0 | The operational speed of this port when linked. Ports which do not have a link report 'none'. |
| 1.3.6.1.4.1.343.2.2.1.10.1.17 | portSecureAdminMode | 0 | 0 | Causes a port to be administratively disabled if an un-authorized MAC address is detected as having transmitted a frame into this… |
| 1.3.6.1.4.1.343.2.2.1.10.1.18 | portSecureMAC | 0 | 0 | Specifies the authorized MAC address for this port if portSecureAdminMode is set to portSecurityOn. |
| 1.3.6.1.4.1.343.2.2.1.10.1.19 | portLinkTestState | 0 | 0 | The current setting of link test function for the port. When disable, a port will no longer be disconnected due to link fail. Wh… |
| 1.3.6.1.4.1.343.2.2.1.10.1.20 | portLinkTestStatusTrapCtrl | 0 | 0 | This object indicates whether a trap should be generated when the link state changes. |
| 1.3.6.1.4.1.343.2.2.1.10.1.21 | portSpeedStatusTrapCtrl | 0 | 0 | This object indicates whether a trap should be generated when the speed status changes. |
| 1.3.6.1.4.1.343.2.2.1.10.1.22 | portPolarityStatus | 0 | 0 | The current polarity status of this port. |