The number of octets (bytes) contained in frames received that had no
errors. This includes octets in unicast, broadcast, and multicast
frames.
It also includes octets after the start frame delimiter up to FCS
but not including FCS octets. This is the sum of all valid received
octets for all ports in this repeater module.
(RFC2108 rptrMonitorGroupTotalOctets)
Parsed from file intelhub.mib.txt
Company: None
Module: INTEL-EXPRESS110-MIB
The number of octets (bytes) contained in frames received that had no
errors. This includes octets in unicast, broadcast, and multicast
frames.
It also includes octets after the start frame delimiter up to FCS
but not including FCS octets. This is the sum of all valid received
octets for all ports in this repeater module.
(RFC2108 rptrMonitorGroupTotalOctets)
Parsed from file INTEL-EXPRESS110-MIB.mib
Module: INTEL-EXPRESS110-MIB
Vendor: Intel Corporation
Module: INTEL-EXPRESS110-MIB
[Automatically extracted from oidview.com]
rptrChassisSegmentTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets (bytes) contained in frames received that had no errors. This includes octets in unicast, broadcast, and multicast frames. It also includes octets after the start frame delimiter up to FCS but not including FCS octets. This is the sum of all valid received octets for all ports in this repeater module. (RFC2108 rptrMonitorGroupTotalOctets) " ::= { rptrChassisSegmentStatEntry 4 }
rptrChassisSegmentTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets (bytes) contained in frames received that had no errors. This includes octets in unicast, broadcast, and multicast frames. It also includes octets after the start frame delimiter up to FCS but not including FCS octets. This is the sum of all valid received octets for all ports in this repeater module. (RFC2108 rptrMonitorGroupTotalOctets) " ::= { rptrChassisSegmentStatEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.343.2.2.1.15.1.1 | rptrChassisIndex | 0 | 0 | This index is the chassis number in the stack. The chassis at the top of the stack is number 1. |
1.3.6.1.4.1.343.2.2.1.15.1.2 | rptrChassisSegmentIndex | 0 | 0 | This index is the segment number in the stack. |
1.3.6.1.4.1.343.2.2.1.15.1.3 | rptrChassisSegmentTotalFrames | 0 | 0 | The number of frames detected without errors. Includes unicast, broadcast, and multicast frames. Does not include frames receive… |
1.3.6.1.4.1.343.2.2.1.15.1.5 | rptrChassisSegmentTotalErrors | 0 | 0 | The total number of errors detected. Total errors include FCS errors, alignment errors, frame too long, short events, late event… |
1.3.6.1.4.1.343.2.2.1.15.1.6 | rptrChassisSegmentFCSErrors | 0 | 0 | The number of frames detected that are free of partial octets and do not pass the FCS check. Usually caused by adapter underrun (… |
1.3.6.1.4.1.343.2.2.1.15.1.7 | rptrChassisSegmentAlignmentErrors | 0 | 0 | The number of frames detected that contain partial octets and do not pass the FCS check. |
1.3.6.1.4.1.343.2.2.1.15.1.8 | rptrChassisSegmentFrameTooLongs | 0 | 0 | The number of frames detected that exceed the maximum permitted frame size. |
1.3.6.1.4.1.343.2.2.1.15.1.9 | rptrChassisSegmentShortEvents | 0 | 0 | The number of fragments detected with ActivityDuration less than ShortEventMaxTime (greater than 74 bit times and less than 82 b… |
1.3.6.1.4.1.343.2.2.1.15.1.10 | rptrChassisSegmentRunts | 0 | 0 | The number of frames detected that are less than the minimum permitted frame size of 64 octets but have a good FCS. Runts usuall… |
1.3.6.1.4.1.343.2.2.1.15.1.11 | rptrChassisSegmentCollisions | 0 | 0 | Sum of all collisions for all ports in this repeater module. |
1.3.6.1.4.1.343.2.2.1.15.1.12 | rptrChassisSegmentLateEvents | 0 | 0 | The number of collisions detected after the allowable detection period. Usually indicates a network topology problem, such as dai… |
1.3.6.1.4.1.343.2.2.1.15.1.13 | rptrChassisSegmentVeryLongEvents | 0 | 0 | The number of times MAU jabber lockup protection (MJLP) was detected due to transmission of data that exceeded 5 msec in duratio… |
1.3.6.1.4.1.343.2.2.1.15.1.14 | rptrChassisSegmentDataRateMismatches | 0 | 0 | A count of the occurrences of out-of-specification bit rates. This indicates the number of times the FIFO buffer overruns or unde… |
1.3.6.1.4.1.343.2.2.1.15.1.15 | rptrChassisSegmentAutoPartitions | 0 | 0 | The number of times this port was automatically partitioned. This condition occurs when too many consecutive collisions are dete… |
1.3.6.1.4.1.343.2.2.1.15.1.16 | rptrChassisSegmentSymbolErrors | 0 | 0 | This counter is incremented by one when a valid length packet was received at the port and there was at least one occurrence of a… |