Sets/reports the repeater segment the module ports participate in.
For modules which do not support automatic port speed selection,
only 'segment1' or 'segment2' may be set.
The 'mixed' value is read-only and indicates that ports
within the module do not share the same segment mode.
Setting module ports via this object does not prevent ports
from being set independently.
Parsed from file intelhub.mib.txt
Company: None
Module: INTEL-EXPRESS110-MIB
Sets/reports the repeater segment the module ports participate in.
For modules which do not support automatic port speed selection,
only 'segment1' or 'segment2' may be set.
The 'mixed' value is read-only and indicates that ports
within the module do not share the same segment mode.
Setting module ports via this object does not prevent ports
from being set independently.
Parsed from file INTEL-EXPRESS110-MIB.mib
Module: INTEL-EXPRESS110-MIB
Vendor: Intel Corporation
Module: INTEL-EXPRESS110-MIB
[Automatically extracted from oidview.com]
moduleSegmentMode OBJECT-TYPE SYNTAX INTEGER { segment1(1), segment2(2), auto(3), mixed(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets/reports the repeater segment the module ports participate in. For modules which do not support automatic port speed selection, only 'segment1' or 'segment2' may be set. The 'mixed' value is read-only and indicates that ports within the module do not share the same segment mode. Setting module ports via this object does not prevent ports from being set independently." ::= { moduleConfigStatusEntry 31 }
moduleSegmentMode OBJECT-TYPE SYNTAX INTEGER { segment1(1), segment2(2), auto(3), mixed(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets/reports the repeater segment the module ports participate in. For modules which do not support automatic port speed selection, only 'segment1' or 'segment2' may be set. The 'mixed' value is read-only and indicates that ports within the module do not share the same segment mode. Setting module ports via this object does not prevent ports from being set independently." ::= { moduleConfigStatusEntry 31 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.343.2.2.1.9.1.1 | moduleChassisIndex | 0 | 0 | Chassis number in the stack. This object refers to the first number in the example below. Example: moduleChassisIndex.1.1 The firs… |
1.3.6.1.4.1.343.2.2.1.9.1.2 | moduleIndex | 0 | 0 | Module number in the chassis. This object refers to the second number in the example below. Example: moduleChassisIndex.1.1 The fi… |
1.3.6.1.4.1.343.2.2.1.9.1.3 | moduleType | 0 | 0 | The module type. The base ports of a 12- or 24-port hub are considered modules. For example, hubTXports12 are ports 1-12 on a 12-… |
1.3.6.1.4.1.343.2.2.1.9.1.4 | moduleUserAssignedType | 0 | 0 | User-definable information about the type of the module. Manufacturer assigns a default value. |
1.3.6.1.4.1.343.2.2.1.9.1.5 | moduleUserAssignedNumber | 0 | 0 | User-definable information about the module. Blank by default. |
1.3.6.1.4.1.343.2.2.1.9.1.6 | moduleUserAssignedName | 0 | 0 | User-definable information about the module. Blank by default. |
1.3.6.1.4.1.343.2.2.1.9.1.7 | moduleSizeofROM | 0 | 0 | Displays the module's ROM size. |
1.3.6.1.4.1.343.2.2.1.9.1.8 | moduleSizeofRAM | 0 | 0 | Displays the module's RAM size. |
1.3.6.1.4.1.343.2.2.1.9.1.9 | moduleHWDescription | 0 | 0 | Displays the CPU type and flash capacity. |
1.3.6.1.4.1.343.2.2.1.9.1.10 | moduleAgentSWVersion | 0 | 0 | Displays the module's agent software version. Each module has software which contributes to the SNMP agent's functionality. The … |
1.3.6.1.4.1.343.2.2.1.9.1.11 | moduleBootSWVersion | 0 | 0 | Displays the module's boot software version. |
1.3.6.1.4.1.343.2.2.1.9.1.12 | moduleManufacturingInfo | 0 | 0 | Displays the manufacturer-assigned hardware description. |
1.3.6.1.4.1.343.2.2.1.9.1.13 | moduleTotalPortCount | 0 | 0 | Displays the total number of ports in the module. This can be: 14 = a 12-port hub (12 base ports plus 2 expansion modules) 16 = a 1… |
1.3.6.1.4.1.343.2.2.1.9.1.14 | moduleExternalPortCount | 0 | 0 | Number of external ports in the module. |
1.3.6.1.4.1.343.2.2.1.9.1.15 | moduleSegmentLockout | 0 | 0 | Prevents the hub speed from being changed by either a management station and/or the Change speed button on the front of a hub. Onl… |
1.3.6.1.4.1.343.2.2.1.9.1.16 | moduleLEDInfo | 0 | 0 | Bitfield used by SNMP application. |
1.3.6.1.4.1.343.2.2.1.9.1.17 | moduleLastErrorID | 0 | 0 | Bitfield used by SNMP application. |
1.3.6.1.4.1.343.2.2.1.9.1.18 | moduleMediaDevicesReset | 0 | 0 | Performs a physical layer reset of the module. Use this reset if ports lock-up on an individual hub. |
1.3.6.1.4.1.343.2.2.1.9.1.19 | moduleImageFileSource | 0 | 0 | Sets the IP address of the device that transfers the image file to the module. The image filename is specified by the moduleImage… |
1.3.6.1.4.1.343.2.2.1.9.1.20 | moduleImageFileName | 0 | 0 | Sets the image filename contained on the device specified by the moduleImageFileSource object. The moduleImageDownloadControl obj… |
1.3.6.1.4.1.343.2.2.1.9.1.21 | moduleImageDownloadControl | 0 | 0 | Starts and stops the image file download process to the module. Use the moduleImageFileSource to set the IP address of the device… |
1.3.6.1.4.1.343.2.2.1.9.1.22 | moduleImageDownloadStatus | 0 | 0 | Displays the Management Module's image file download status. If error appears, use the moduleImageFileSource, moduleImageFileNam… |
1.3.6.1.4.1.343.2.2.1.9.1.23 | moduleOperationalStatus | 0 | 0 | Current operational state of the module. |
1.3.6.1.4.1.343.2.2.1.9.1.24 | moduleUptime | 0 | 0 | Time since the module was last reset. |
1.3.6.1.4.1.343.2.2.1.9.1.25 | moduleReset | 0 | 0 | Resets the module. |
1.3.6.1.4.1.343.2.2.1.9.1.26 | moduleAllPortLEDInfo | 0 | 0 | Bitfield used by SNMP application. |
1.3.6.1.4.1.343.2.2.1.9.1.27 | moduleAllPortAdminStatus | 0 | 0 | Bitfield used by SNMP application. |
1.3.6.1.4.1.343.2.2.1.9.1.28 | moduleAllPortOperStatus | 0 | 0 | Bitfield used by SNMP application. |
1.3.6.1.4.1.343.2.2.1.9.1.29 | moduleAllPortSpeed | 0 | 0 | Bitfield used by SNMP application. |
1.3.6.1.4.1.343.2.2.1.9.1.30 | moduleAllPortSpeedInfo | 0 | 0 | Bitfield used by SNMP application. |
1.3.6.1.4.1.343.2.2.1.9.1.32 | moduleAllPortLinkPartnerInfo | 0 | 0 | Bitfield used by SNMP application. |
1.3.6.1.4.1.343.2.2.1.9.1.33 | moduleAllPortCounterReset | 0 | 0 | Resets all the port counters in the module to zero. This includes all traffic statistics (packet count, etc.) and error counts. |
1.3.6.1.4.1.343.2.2.1.9.1.34 | moduleAllPortTimeSinceLinkChange | 0 | 0 | Bitfield used by SNMP application. |
1.3.6.1.4.1.343.2.2.1.9.1.35 | modulePersistentMemoryReset | 0 | 0 | Reset contents of persistent memory objects to factory defaults. Persistent memory object are settings that are saved even after … |